"wiremold"

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black. Diameter: 8-1/4 Inch. Depth: 9-1/16 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (1) Ortronics TracJack Mounting Bezel & (1) Ortronics Series I

Category: Poke-Through Cover Assemblies

Flange available in painted gray (GY), black (BK), ivory (VY), or brushed metal finished in aluminum (AL), and brass (BS) . Slide covers match the painted flange colors, gray, black, and ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Aluminum Flange with Aluminum Nonmentallic Cover.

Category: Poke-Through Cover Assemblies

Wmd Rc4ctcbs Bs Fl & Bk Cv 20

Category: Poke-Through Cover Assemblies

6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Slide Holder Assembly, Nonmetallic, Brass Powder-Coat, For Use with Tile or Carpet Flooring.

Category: Poke-Through Cover Assemblies

Wlk Rc4shtcbs Nm Brass Slide

Category: Poke-Through Cover Assemblies

Cover for Poke-Thru/Finish Flange and Conduit Adapter Assembly, RC7 Series, Plugs: (1) 3/4", (2) 1/2", Painted Black, For Use with Carpet, Wood and Tile Flooring.

Category: Poke-Through Cover Assemblies

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Poke-Through Cover Assemblies

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

AV3 SLIDE HOLDER BK

Category: Poke-Through Cover Assemblies

Poke-Thru Device Cover, Series: RC4, Nonmetallic, Cover Type: Flush, Slide, Material/Finish: Polycarbonate/Black Cover w/ Aluminum Painted Flange. Diameter: 8-1/4", For Use on Tile, Wood, Laminate, or Carpet Flooring.

Category: Poke-Through Cover Assemblies

Surface Style Cover Assembly, 8 Inch Round, Evolution Series, Die Cast Aluminum With Black Powder Coat, Each Cover is Made From Die-Cast Aluminum, Equipped With a Durable Hinge That Allows 180° Rotation, Two (2) Slide Egress Doors With Lock/Auto Close Options, 8° Beveled Edge. For Use With Carpet, Tile, Wood, Polished Concrete, and Terrazzo.

Category: Poke-Through Cover Assemblies

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, For Tile, Carpet, Wood and Laminate Flooring.

Category: Poke-Through Cover Assemblies