Poke-Through Cover Assemblies

Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Cover assembly also includes two openings for pass-through capability for one 4-pair Category 5e or Category 6 cable per opening. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9 Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Gray

Category: Poke-Through Cover Assemblies

One and a half-gang pass through housing assembly. Used for furniture feed applications on the center compartment only. Only for use with the 6AT Series units.

Category: Poke-Through Cover Assemblies

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Poke-Through Cover Assemblies

P-THRU FURNITURE FEED COVER BLACK

Category: Poke-Through Cover Assemblies

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

WMD RC9CM2TCGY 2IN FURNITURE

Category: Poke-Through Cover Assemblies

WMD RC9SHTCGY P-THRU QUAD SLI

Category: Poke-Through Cover Assemblies

Poke-Thru, Tamper-Resistant, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

STL FPT4-CVR-TBRN 4X4 POKE-TH

Category: Poke-Through Cover Assemblies

WMD RC9CTCAL P-THRU CVRGY FLA

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Surface, Material/Finish: Die-Cast Aluminum/Black Powder-Coat.

Category: Poke-Through Cover Assemblies

WMD RC9CFFTCGY P-THRU FURNITU

Category: Poke-Through Cover Assemblies

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

WMD RC7APTCGY ABANDON PLT GY/

Category: Poke-Through Cover Assemblies

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Nickel

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Black Powder-Coat.

Category: Poke-Through Cover Assemblies

RC4 SLIDE HOLDER BK

Category: Poke-Through Cover Assemblies

Available in gray (GY), and black (BK). NOTE: AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Poke-Through Cover Assemblies

Concrete Floorboxes, Flush, Round PVC Box Series, Round Cover/Flange Assembly, Non-Metallic, Ivory

Category: Poke-Through Cover Assemblies

W-mold Amd8atcgy Poke Thru

Category: Poke-Through Cover Assemblies

Complete with one 3/4" [19.1mm] conduit and two 1/2" trade size adapters and closure plugs. Colors available in painted gray (GY), black (BK), forged brushed aluminum (AL), and plated brass (BS). Use with the RC7STC Insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" [78mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimu

Category: Poke-Through Cover Assemblies

Cover for Poke Thru Device, Series: RC9, RC3, and AV3 Poke Thru Assemblies, Flush, Flange: Gray, Non-Metallic Cover, Color: Gray, For Tile and Carpet Flooring.

Category: Poke-Through Cover Assemblies