Grounding Products

C-Tap Connector, Wire Range: 4/0 AWG to 250 MCM, 3/4 Inch Ground Rod, Copper

Category: Grounding Grid Connectors

OZ-Gedney Type BJ Bonding Jumper, Size: 1 - 1-1/4 IN, Clamps: Malleable Or Ductile Iron, U-Bolts: Steel, Braids: Tinned Copper, Finish: Clamp And U-Bolt: Hot Dip Galvanized, 24 IN Fully Extended Braid, Third Party Certification: UL File Number

Category: Bonding Jumpers

Mechanical Grounding Connector, 2 Cables to Flat, 10 - 7 AWG (Str) / 10 - 6 AWG (Sol), 1/4" Stud

Category: Structural Grounding Studs

Ground Rod Clamp, Rod to Conductor, Bronze, Silicon Bronze, 1" dia, #8 Solid-4/0 Stranded, 10 mm² Solid-95 mm² Stranded, 9/16" Wrench

Category: Ground Rod Ground Clamps

Bonding Jumper, Size: 1/2 to 3/4 Inch, Length: 24 Inch, Tinned Copper Braid, For Use with Rigid/IMC Conduit

Category: Bonding Jumpers

Ground Grid Cross Connector, Compression, Element "A" Cable to Cable 2 AWG to 250 MCM, Element "B" Cable to Cable 2 AWG to 250 MCM, Element "A" Cable to Ground Rod 1/2 Inch to 5/8 Inch, Element "B" Cable to Ground Rod 2 AWG to 250 AWG, Direct Burial Rated

Category: Grounding Grid Connectors

Interconnects and terminates grounding conductors from telephone, CATV, radio and TV antennas. Ideal for residential and small commercial applications.

Category: Insulated Ground Bars

Ground Hub, Hub Size: 1", Clamp Material: Bronze, Screw Material: Steel, Wire Range: 10 AWG (Solid) - 3/0 AWG (Stranded)

Category: Ground Clamps With Hub

Compression Grounding Plate, 2-Hole, 2 AWG - 250 MCM, 1/2 Inch Stud, 1-3/4 Inch Hole Spacing, Copper

Category: Ground Plates

Ground Braid, Copper, Flexible, 18 Inch Length, 0.94 Inch Width, 190 Amp Indoor, 225 Amp Outdoor

Category: Metallic Grounding Braids

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 2 Inch, 2/0 AWG to 250 MCM, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Bare Ground Clamp, Clamp Material: Bronze, Screw Material: Steel, Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Pipe Size: 4-1/2" - 6". *Dottie Part # 10028.* ***Not UL Approved*** For Use in Grounding Bare Copper Wire to Water Pipe, Rebar, Ground Rod or Copper Water Tubing.

Category: Bare Wire Ground Clamps

Irreversible mechanical connection connects the grounding conductor to the ground rod. It is fast and easy to install and only requires a hammer.

Category: Ground Rod Ground Clamps

Pigtail Wire Connector, Green, 12 AWG stranded 8 in. w/#10 Fork & Stripped End, Wire-Nut® (Order of 1 = Bag of 25)

Category: Stranded Wire Ground Pigtails

Compression Cross Grid Connector, 250 - 500 MCM or 5/8 - 3/4 Inch Ground Rod or #5-#6 Rebar Run and 2 AWG - 250 MCM Tap, Copper

Category: Grounding Grid Connectors

Ground Clip, Copper Gauge: 10 AWG - 14 AWG.

Category: Ground Clips

Service Post Connector, Copper, Two Conductor, 1 to 4/0 AWG, 5/8 Inch Stud, Direct Burial Rated

Category: Structural Grounding Studs

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 3 Inch, 4 AWG to 2/0 AWG, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Mechanical Grounding Connector, 4/0 to 2/0 AWG, 1/2 Inch Stud, One Cable to 1/4 Inch Thick Bar

Category: Tower Ground Clamps

Ground Rod Clamp, 3/4 Inch, 8 to 1/0 AWG, Bronze

Category: Ground Rod Ground Clamps

Grounding Busbar, Pattern: GG, Dimensions: 4 x 12 x 1/4 Inch, Material: Copper, Includes: Insulator, SS Brackets, SS Mounting Bolts.

Category: Bus Bars

Mechanical Grounding Connector, Cable-to-Flat, (2) 2/0 (STR) or (2) 3/0 (SOL) AWG, 1/2 Inch Stud, Leaded Bronze Alloy

Category: Structural Grounding Studs

Common earthing point for multiple electrical panels and devices. Includes busbar, insulators and brackets. Busbar has a LL hole pattern.

Category: Bus Bars

Transformer Grounding Connector, Copper, Wheelabrate Finish, 8 - 2 AWG

Category: Transformer Tank Ground Connectors