Fittings

Corner Angle Fitting, 90°, 4 Holes, Bolt Hole Diameter: 9/16 in, Material: 304 Stainless Steel

Category: 90 Degree Strut Channel Corner Connectors

Flat Angle Plate, 4 Holes, Bolt Hole Diameter 9/16 in, 5 3/8 in x 3 1/2 in, Material: Steel, Hot Dip Galvanized Finish.

Category: Flat Plate Strut Channel Connectors

nVent CADDY Cablecat J-Hook with Hammer-On Flange Clip, Swivel, Steel, Spring Steel, 3/4" dia, 5/16"–1/2" Flange

Category: J-Hook From Wire/Rod & Beam

Combination Coupling, Liquidtight to Rigid, 1 Inch, Steel

Category: Steel Rigid To Liquidtight Combination Couplings

Connector Compression, Conduit Size 2 Inches, Length 2-5/32 Inches, Width 2-17/32 Inches, Die Cast Zinc, For use with EMT Conduit

Category: Zinc Die Cast Concrete Tight EMT Compression Couplings

Conduit/Pipe to Flange Clip, Conduit Size: 2", Flange Thickness: 5/16" - 1/2", Steel, 50 Pack

Category: Flange-Mount Cable/Conduit Clips

Floor Flange, Threaded, 1-1/4 Inch, Malleable Iron

Category: Threaded Floor Flanges

Conduit Body Cover, Size: 3/4 Inch, Material: Iron, Color: Dark Gray

Category: PVC Coated Conduit Body Covers

Floor Flange, Threaded, 3/4 Inch, Malleable Iron

Category: Threaded Floor Flanges

Locknut, Material of Construction: Steel, Nut Type: Locknut, Thread Size: 2-1/2 IN, Height: 0.38 IN, Width: 3.56 IN, Size: 2-1/2 IN, Standard: UL 514B, UL File Number E14814, CSA C22.2 No. 18.3, CSA Certified 065178, NEMA FB-1, For Rigid Conduit And IMC

Category: Steel Conduit Locknuts

Straight Uninsulated Connectors Die Cast Zinc, 1-1/2 In. Trade Size

Category: Straight Die-Cast Liquidtight Flex Connectors

1/2 Inch Erickson Coupling, Aluminum, for Use with Rigid/IMC Conduit

Category: Aluminum Rigid Conduit Three Piece Unions

4", Sealing Locknut, Material: Steel, Threaded. For Use With Rigid/IMC/EMT Conduit.

Category: Gasketed Conduit Locknuts

1/2 Inch 316 Stainless Steel Grounding Hub, Thermoplastic Insulating Throat, Sealing Ring Nitrile (BUNA-N) for Use with Rigid/IMC Conduit

Category: Stainless Steel Conduit Hubs With Grounding

Dust-Tight Strain-Relief Grip, Single Weave, Straight, Male, Aluminum Body, Galvanized Steel Mesh, Insulated NPT Hub Size: 1/2 Inch, Cable Dia. Range: 0.430 Inch - 0.540 Inch, Mesh Length: 4.75 Inch.

Category: Single / Double Weave Strain-Relief Grips

MC/AC/Flex Connector, Duplex, Flex Conduit Size 3/8 Inch With 1/2 Inch Knockout, Malleable Iron/Zinc, For Use To Ground and Secure (2) Armored Cables to Box/Enclosure.

Category: Double Barrel MC / AC Connectors

Conduit Body, LR, 1 Inch, Aluminum, Epoxy Powder Coat Finish, For Use With Rigid/IMC Conduit

Category: Type LR Aluminum Conduit Bodies

CONDUIT TO BEAM FASTENER, GUIDE-RITE, 1/2-IN., 3/4-IN. CONDUIT SIZE

Category: Conduit Hangers From Wire/Rod & Beam

1 IN COND BODY ALUM C

Category: Type C Aluminum Conduit Bodies

Straight Male Cord Connectors, Form Size: F2, Color Code: Blue, NPT Hub Size: 1/2 Inch, Cord Dia. Range: 0.38 Inch - 0.50 Inch, Material/Finish: Machined Zinc-Plated Steel.

Category: Straight Steel Cord Grips

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-3/16 IN Length X 2-3/

Category: Straight Squeeze Flex Connectors

1 Inch, Steel Grounding Locknut, For Use with Rigid/IMC Conduit

Category: Steel Conduit Locknuts

OZ-Gedney Type 4Q-T Liquid Tight 90 DEG Connector, Size: 1 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 1-3/4 IN Width, Dimension A:

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type T Conduit Body, 1-1/4 IN Hub, Form: 7, Length: 7-7/16 IN, 3-3/16 IN Width, 2-5/16 IN Height, Iron, Finish: Zinc Electroplated With Aluminum Enamel, Gray, Connection: Tapered FNPT, 3 (3 AWG) Conductors, 20 CU-IN Volume, Third Party Certi

Category: Type T Iron Conduit Bodies