Fittings

Cable to Beam, Double Conduit Runs, Max Flange: 1/8 - 1/4 Inch, Steel

Category: Flange-Mount Cable/Conduit Clips

Bridle Ring, Threaded, 4 Inch, 1/4-20 Screw, Steel/Zinc

Category: Plain, Threaded & Wood Screw Bridle Rings

3 inch, Die-Cast Cable Connector - 3 inch, K.O. Size

Category: All Purpose Cable Connectors

Eaton B-Line series adjustable J-hanger, 0.75" H x 4.5" L x 2.75" W, Steel, Yellow zinc chromate, Wall

Category: Strut Channel J Conduit Hangers

Snap Close Conduit to Conduit Clamp, 1/2 or 3/4 Inch EMT to 1 Inch EMT Conduit, Steel

Category: Conduit Clips

Eaton B-Line series beam clamps, 1000 lb, Malleable iron, Safety factor 5, used with setscrew and locknut, Series rod support, 1/2"-13 thread/rod size, 3/4", Hot-dipped galvanized

Category: Beam Clamps - Adjustable

OZ-Gedney BC-G Series Flat Top Design Cover, 3/4 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514

Category: Iron Conduit Body Covers

Reducing Bushing, Threaded, Size: 2-1/2 Inch x 1-1/4 Inch, Material: Aluminum

Category: Aluminum Reducing Bushings

Conduit Body With Cover and Neoprene Gasket, Type: C, Size: 1/2 Inch, Aluminum

Category: Type C Aluminum Conduit Bodies

Liquidtight Connector, STF Series, 1-1/4 Inch, Malleable Iron, For Use Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Conduit to Beam Clamp, Rigid: 3/8", EMT: 3/8", Flange: 1/4 - 1/8 Inch, Steel/Zinc

Category: Flange-Mount Cable/Conduit Clips

Eaton B-Line series pre-assembled O.D. pipe and conduit clamp, 0.0966" H x 5.8430" L x 1.25" W, Steel

Category: Strut Channel Rigid Conduit Clamps

Connector Set Screw, Conduit Size 1-1/2 Inch, Length TC221 Series 2-9/32 Inches TC821 Series 2-3/8 Inch, Width 2-3/64 Inch, Die Cast Zinc

Category: Zinc Die Cast EMT Set Screw Connectors

Conduit Clamp, 1-1/2 Inch, Pre-Assembled, Stainless Steel, For Use With Rigid/IMC Conduit

Category: Strut Channel Rigid Conduit Clamps

Conduit Body, Type: TA, 1 Inch, Form 35, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type TA Iron Conduit Bodies

EMT Compression Connector, Insulated, Size: 1/2 Inch, Concrete Tight/Raintight, Zinc Die Cast

Category: Zinc Die Cast Concrete Tight EMT Compression Connectors

OZ-Gedney Type J Conduit Clamp, 3/4 IN Cable, Cable Type: IMC, EMT, Malleable Iron, Steel Bolt, Finish: Mechanically Galvanized, Dimensions: 1-7/8 IN Length X 1-13/32 IN Depth X 2-7/8 IN Height, Dimension D: 1-15/16 IN, 5/16-18 X 1-1/2 IN Length Bol

Category: Purlin Hangers

Conduit Offset Nipple, Type Offset, Threaded Male, Trade Size 1/2 Inch, Length 1-5/8 Inch, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard NEMA FB-1

Category: Zinc Die Cast Offset Nipples

Liquidtight Connector, 2 Inch, Straight, With Grounding Lug, Steel, For Use With Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Beam Clamp, 5/16-18 Rod, 3/4 IN THK, 300 LB Load, Steel, Electro Plated

Category: Beam Clamps - Adjustable

Chase Nipple, 3 Inch, Insulated, Material: Malleable Iron.

Category: Iron Chase Nipples

OZ-Gedney Type SG Solid Cover Sealing Gasket, Trade Size: 1/2 IN, Velbuna Composition, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Fiber Conduit Body Gaskets

Coupling, Compression, Conduit Size 1/2 Inch, Length 1-1/2 Inch, Width 1-3/32 Inch, Die Cast Zinc

Category: Zinc Die Cast EMT Set Screw Couplings

Chase Nipple, 3/4 Inch, Insulated Material: Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes.

Category: Zinc Die Cast Chase Nipples