Fittings

Conduit to Stud Clip, Size: 1/2 Inch, Material: Steel

Category: Conduit to Stud Supports

Plug, Close-Up, Square Head, 2-1/2 Inch, Explosion-Proof, Malleable Iron, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Square Head Close-Up Plugs

Liquidtight Cord Grip Connector, Straight, Male, Hub Size: 3/4 Inch, Cable Range: 0.500 Inch - 0.600 Inch, Material: Steel.

Category: Straight Steel Cord Grips

UNILETS Flexible Coupling, Trade Size: 3/4 IN, Outside Diameter: 1-3/4 IN, Flex Length: 12 IN, Bending Radius: 12 IN, Flexibility: Rigid And IMC, Material: Outer Bronze Braid And Inner Brass Core With Insulating Liner, End Type (1) Male Nipple, (1) Union

Category: Explosion-Proof Type EXLK Couplings

Eaton B-Line series conduit support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.08lbs, 0.5" EMT, Push-type conduit to beam fasteners, .13" Min mount size, .25" Max mount size

Category: Flange-Mount Cable/Conduit Clips

Steel City CHASE HA-202 Conduit Nipple W/ Throat, 3/4 IN, Zinc Alloy

Category: Zinc Die Cast Chase Nipples

Screw-In Connectors w/ Insulated Throat

Category: Screw-In Flex Connectors

3/4 Inch Recessed Plugs, Aluminum, with Flush Head for Hazardous and Non Hazardous Locations

Category: Explosion-Proof Recessed Head Close-Up Plugs

Chase Nipple, 1 Inch, Insulated, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Steel Chase Nipples

APP TPC350 3-1/2" 3 PIECE CPL

Category: Iron Rigid Conduit Three Piece Couplings

1 IN COND BODY ALUM C

Category: Type C Aluminum Conduit Bodies

Conduit Hub, Size: 1-1/4 Inch, Threaded, Material: Stainless Steel, Calbrite Stainless Steel Hubs Are Fabricated to UL514B and ASTM A351 Standards.

Category: Stainless Steel Conduit Hubs

EXGJH Flexible Coupling, 1/2 x 30 Inch Length, Explosionproof and Dust-Ignitionproof, Watertight, Brass End Fittings and Bronze Outer Braid, Brass Inner Core with Insulating Liner, Both End Fittings Female with Removable Male Nipple, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Type ECGJH Couplings

Screw-In Connector, 1 Inch, Insulated, Zinc Die Cast, For Use With Flexible Metal Conduit

Category: Screw-In Flex Connectors

Conduit Body, Type: LL, 1 Inch, Cover/Gasket Included, Aluminum, For Use With Rigid/IMC Conduit

Category: Type LL Aluminum Conduit Bodies

Sealing Locknut, 2 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

Square Washer, Size: 3/8 in, Material: Steel, Finish: Galv-Krom.

Category: Strut Channel Washers

Rigid Strut Strap, Diameter: 3/4 Inch, Material: Steel/Hot Dipped Galvanized, Pre-Assembled, For Use With GRC, IMC, SCH 40/SCH 80 Conduit

Category: Strut Channel Rigid Conduit Clamps

Cable to Beam, Double Conduit Runs, Max Flange: 1/8 - 1/4 Inch, Steel

Category: Flange-Mount Cable/Conduit Clips

Bridle Ring, Threaded, 4 Inch, 1/4-20 Screw, Steel/Zinc

Category: Plain, Threaded & Wood Screw Bridle Rings

3 inch, Die-Cast Cable Connector - 3 inch, K.O. Size

Category: All Purpose Cable Connectors

Eaton B-Line series adjustable J-hanger, 0.75" H x 4.5" L x 2.75" W, Steel, Yellow zinc chromate, Wall

Category: Strut Channel J Conduit Hangers

Snap Close Conduit to Conduit Clamp, 1/2 or 3/4 Inch EMT to 1 Inch EMT Conduit, Steel

Category: Conduit Clips

Eaton B-Line series beam clamps, 1000 lb, Malleable iron, Safety factor 5, used with setscrew and locknut, Series rod support, 1/2"-13 thread/rod size, 3/4", Hot-dipped galvanized

Category: Beam Clamps - Adjustable