Fittings

5" P&c 5 Deg Angle Coupling (bxs)

Category: PVC Couplings

Kwik Washer, For Use With ANY channel, Size: 1/4 in, Material: Steel, Finish: Electro-Galvanized.

Category: Strut Channel Washers

Rigid Strut Strap, Diameter: 1 1/4 in, Material: Gold-Galvanized Steel.

Category: Strut Channel Rigid Conduit Clamps

OZ-Gedney Ground-Tite Type 4Q-L Grounding Liquid Tight 90 DEG Connector With Lug, Size: 1/2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA R

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

THB TL 211 1/2 PULL ELB SSCRE

Category: Zinc Die Cast EMT Pulling Elbows

Carlon E996d 1/2 Pvc Box Adpt

Category: PVC Male Terminal Adapters

1/2-IN. - RIGID CONDUIT CLAMP, 1/2-IN., ALUMINUM

Category: Strut Channel Aluminum Conduit Clamps

Hub Size: 1-1/4 Inch NPT, Liquidtight Male Straight Strain Relief Cord/Cable Connector, Cable Range: 0.750 Inch - 0.875 Inch, Dimensions: 1.06 Inch x 1.75 Inch, Material: Aluminum.

Category: Liquidtight Strain-Relief Grips with Mesh

THB RC-1 1/2HDG RC BEAM CLP C

Category: Malleable Iron EMT Right Angle Type K-Clamps

Rigid Strut Strap, Diameter: 3 1/2 in, Material: Steel, Finish: Galv-Krom

Category: Strut Channel Rigid Conduit Clamps

THB XJG24-TB 3/4 EXP CPLG 4 I

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-3/16 IN Length X 2-3/

Category: Straight Squeeze Flex Connectors

Screw-In Connector, 1-1/4 Inch, Zinc Die Cast, For Use With AC/Flex/NM Cable

Category: Screw-In Flex Connectors

THB TCF075-78AL TRAY & CORD.7

Category: Aluminum Cable Glands

Liquidtight Grounding Connector, 90°, Insulated, Size: 2 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Connector 90 Degree Clamp-Type, Size 2 Inches, Clamping Range 1.51 Inch - 2.47 Inch, Length 6.05 Inches, Die Cast Zinc

Category: 90 Degree Two Screw Squeeze Flex Connectors

Strut Conduit Clamp, Rigid, 1/2 Inch, Material: Steel, Finish: GoldGalv, For Use With Rigid/IMC Conduit

Category: Strut Channel Rigid Conduit Clamps

EMT Set Screw Coupling, 3/4 inch, Steel

Category: Steel EMT Set Screw Couplings

2-1/2 Inch Threaded Insulated Grounding Bushing, Aluminum, Electro Zinc Plated, Wire Range 8 to 2/0, Thermoplastic Insulator for Use with Rigid/IMC Conduit

Category: Threaded Ground Bushings

NM cable connector zinc die-cast. 2 screw clamp type. Handles combinations of NM cable from #14 to #10. Up to 3 NM cables at one time. 3/4 Knockout. Also handles one 8/2, two 4/2 service cable Snap tight

Category: Zinc Die Cast NM Cable Connectors

THB EYS11-TB 1/2 INCH SEALING

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type 4Q-T Liquid Tight 90 DEG Connector, Size: 1 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 1-3/4 IN Width, Dimension A:

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Conduit Strap, 1 Hole, Size: 2 Inch, PVC Coated

Category: PVC Coated 1-Hole Conduit Straps

Plug, Close-Up, Square Head, 2-1/2 Inch, Explosion-Proof, Malleable Iron, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Square Head Close-Up Plugs