Fittings

Replacement Gland, Cable Range: 1.000 Inch - 1.125 Inch, Material: Neoprene Grommet. For Use w/ 1 1/4 Inch Connector Hubs.

Category: Replacement Cable Glands

OZG ECGJH-50-18 1/2 X 18" FLE

Category: Explosion-Proof Type ECGJH Couplings

THB EYS11-TB 1/2 INCH SEALING

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

THB TK 226SC 2 INCH COUPLING

Category: Zinc Die Cast EMT Set Screw Couplings

Eaton B-Line series conduit support fasteners, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.08lbs, Conduit size: 1", Guide-Rite conduit fasteners

Category: Conduit Hangers From Wire/Rod & Beam

Conduit to Beam Clamp, Rigid: 3/8", EMT: 3/8", Flange: 1/4 - 1/8 Inch, Steel/Zinc

Category: Flange-Mount Cable/Conduit Clips

Eaton B-Line series U-support, 3.25" H x 5.43" L x 1.62" W, Steel, Electro-plated, 1/4" Gauge

Category: U-Support Strut Channel Connectors

Conduit Hub, 3/4 Inch, Insulated, Watertight, Zinc Die Cast, For Use With Rigid/IMC Conduit

Category: Die Cast Zinc Conduit Hubs

OZ-Gedney Type 4Q-T Liquid Tight 90 DEG Connector, Size: 1 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 1-3/4 IN Width, Dimension A:

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Reducing Bushing, Threaded, 1-1/4 Inch x 3/4 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

OZ-Gedney Type J Conduit Clamp, 3/4 IN Cable, Cable Type: IMC, EMT, Malleable Iron, Steel Bolt, Finish: Mechanically Galvanized, Dimensions: 1-7/8 IN Length X 1-13/32 IN Depth X 2-7/8 IN Height, Dimension D: 1-15/16 IN, 5/16-18 X 1-1/2 IN Length Bol

Category: Purlin Hangers

Conduit Offset Nipple, Type Offset, Threaded Male, Trade Size 1/2 Inch, Length 1-5/8 Inch, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard NEMA FB-1

Category: Zinc Die Cast Offset Nipples

Three-Piece Knockout Seal, 1/2 Inch, Bolt-On, Steel

Category: 3-Piece Knockout Seals

Locknut, Material of Construction: Steel, Nut Type: Locknut, Thread Size: 2-1/2 IN, Height: 0.38 IN, Width: 3.56 IN, Size: 2-1/2 IN, Standard: UL 514B, UL File Number E14814, CSA C22.2 No. 18.3, CSA Certified 065178, NEMA FB-1, For Rigid Conduit And IMC

Category: Steel Conduit Locknuts

3/4 Inch Recessed Plugs, Aluminum, with Flush Head for Hazardous and Non Hazardous Locations

Category: Explosion-Proof Recessed Head Close-Up Plugs

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 11/32 IN Height, 3-7/16 IN Width, Size: 2-1/2 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Gasketed Conduit Locknuts

Post Base, For 1 5/8-in. X 1 5/8-in. Channel, 8-in. X 3 1/8-in. X 3 1/2-in. Square, Material: Steel, Finish: Dura Green.

Category: Post Base Strut Channel Connectors

Conduit Bushing, Insulating, 3-1/2 Inch, Threaded, Malleable Iron, For Use With Rigid Metal and IMC Conduit.

Category: Rigid & IMC Bushings

OZ-Gedney BC-G Series Flat Top Design Cover, 3/4 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514

Category: Iron Conduit Body Covers

Liquidtight Connector, 1/2 Inch, Straight, Material: Nylon, For Type B Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

Features: Explosion-Proof, Dust-ignition Proof, Application: Threaded Metal Conduit, Standard: Ul, Astm A47-77, Size: 0.5in, Material: Malleable Iron, Finish: Zinc Electroplate, Dichromate, Epoxy Powder Coat

Category: Explosion-Proof Malleable Iron Pulling Elbows

Conduit Body, Type LR, FM7, 2-1/2", Copper Free Aluminum.

Category: Type LR Iron Conduit Bodies

Eaton B-Line series adjustable J-hanger, 0.75" H x 4.5" L x 2.75" W, Steel, Yellow zinc chromate, Wall

Category: Strut Channel J Conduit Hangers

Sealing Locknut, 2 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts