Search results

Flange-Mount Conduit Clips (snap-close). 1-1/4" conduit to 1/8" to 1/4" flanges. Load limit: 75 lbs. Standard Packaging Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

Elbow, 90 Degree, 3/4 Inch, Female, Explosion-Proof and Dust-Ignitionproof, Malleable Iron

Category: Explosion-Proof 90 Degree Female Elbows

Standard Strut Strap, Diameter: 1", Material: Steel, Finish: Stainless Steel. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

Screw on conduit support; attaches 1/2" and 3/4" EMT, conduit, MC/AC to metal or wood stud for 1 1/2 deep box. Standard Packaging Quantity: 100.

Category: Conduit to Stud Supports

Liquidtight Sealing Gasket With Retainer, 1-1/2 Inch Diameter, Thermoplastic Rubber Gasket With Stainless Steel Retainer Ring

Category: Liquidtight Connectors - Accessories

Squeeze Connector, 2-Screw, Straight, 3/4 Inch, Die Cast Zinc, For Use With Flexible Metal Conduit

Category: Straight Squeeze Flex Connectors

Unistr P1010eg 1/2 Spring Nut

Category: Strut Channel Spring Nuts

EMT Compression Connector, 1 Inch Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Conduit Hanger 1" EMT to 1/4" and Smaller Rods or Flanges. Standard Packaging Quantity: 100.

Category: Conduit Hangers From Wire/Rod & Beam

One Piece Strut Clamp, With Back Plate. 1" EMT; 3/4" Rigid. Static Load Limit: 200 lbs. Standard Packaging Quantity: 100.

Category: Strut Channel One Piece Pipe Clamps

Sealing Fitting, Vertical/Horizontal, 1/2 Inch, 25% Fill, Female, Explosion-Proof, Dust-Ignitionproof, Rain Tight, Malleable Iron, For Use in Close Turning Radius With Rigid/IMC Conduit

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Box Hanger, Snap On Fixture, Acoustical Ceiling, 8 Inch Height Adjustable, 24 Inch Span, Steel

Category: Acoustical T-Grid Ceiling Snap On Fixture / Box Hangers

Reducing Bushing, 3 Inch to 2 Inch, Threaded, Bushing Material: Aluminum.

Category: Aluminum Reducing Bushings

Rigid Strut Strap, 3/4 Inch Diameter, Pre-Assembled, Steel with Zinc Plated Finish, For Use With Rigid/IMC Conduit

Category: Strut Channel Rigid Conduit Clamps

Chase Nipple, 3/4 Inch, Malleable Iron, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Iron Chase Nipples

Multi-Function Clip - Wire Size #12 wire thru 1/4" - Flange Size 1/8"-3/8". Standard Packaging Quantity: 100

Category: Cable/Conduit From Drop Wire Support

Standard Strut Strap, Diameter: 2", Material: Steel, Finish: Stainless Steel. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

Conduit to Beam Fastener, 1 Inch Conduit, 1/8 to 1/4 Inch Flange, Side-Mount, Guide-Rite, Will Rotate 360°, Install with Hammer and Pliers

Category: Flange-Mount Cable/Conduit Clips

3" to 1", Reducing Bushing, Threaded, Bushing Material: Malleable Iron.

Category: Iron Alloy Reducing Bushings

Snap Close Conduit to Rod/Wire Clip, 1 Inch EMT, 1.18 - 1.38 Inch OD, 1/4 Inch Rod, #12 Wire

Category: Conduit Hangers From Wire/Rod & Beam

Conduit Locknut, 1 Inch Diameter, Aluminum, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Locknuts

Four Hole Corner Plate, Flat Fitting, 3-1/2 Inch Width, 5-3/8 Inch Height, Steel With Zinc Finish

Category: Flat Plate Strut Channel Connectors

EMT Compression Connector, 3/4 Inch Diameter, Insulated, Concrete Tight, Steel with Zinc Finish, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Liquidtight Connector, 3/4 Inch, 45°, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors