Search results

4,499 Found

In Stock Only

List

Grid

Made in USA

Appleton

Reducing Bushing, Threaded, Malleable, 3" x 2-1/2"

3" to 2-1/2", Reducing Bushing, Threaded, Bushing Material: Malleable Iron.

Item #: 58585

CAT #: RB300-250

UPC: 781381655552

Category: Iron Alloy Reducing Bushings

Company wide:

nVent Caddy

Single Piece Strut Clamp for Cable/Conduit, 1.74"–2.2" OD, 2" EMT 1 1/2" Rigid

One Piece Strut Clamp, With Back Plate. 2" EMT; 1-1/2" Rigid. Static Load Limit: 350 lbs. Standard Packaging Quantity: 50.

Item #: 47394

CAT #: SCH32B

UPC: 782856252375

Category: Strut Channel One Piece Pipe Clamps

Company wide:

nVent Caddy

Cable/Conduit to stud attachment, 1/2", 3/4" EMT, 1 1/2" box depth

Screw on conduit support; attaches 1/2" and 3/4" EMT, conduit, MC/AC to metal or wood stud for 1 1/2 deep box. Standard Packaging Quantity: 100.

Item #: 21330

CAT #: CS812

UPC: 782856326069

Category: Conduit to Stud Supports

Company wide:

nVent Caddy

Single Piece Strut Clamp for Cable/Conduit, 0.72"–1.16" OD, 1" EMT 3/4" Rigid

One Piece Strut Clamp, With Back Plate. 1" EMT; 3/4" Rigid. Static Load Limit: 200 lbs. Standard Packaging Quantity: 100.

Item #: 20688

CAT #: SCH16B

UPC: 782856255161

Category: Strut Channel One Piece Pipe Clamps

Company wide:

Appleton

Rigid Three-Piece Coupling, 2", Threaded, Malleable

Item #: 29457

CAT #: EC-200

UPC: 781381247955

Category: Iron Rigid Conduit Three Piece Couplings

Company wide:

Thomas & Betts

Conduit Locknut, 1/2" Diameter, Aluminum

Conduit Locknut, 1/2 Inch Diameter, Aluminum, For Use With Rigid/IMC Conduit

Item #: 39072

CAT #: 141AL

UPC: 786210801186

Category: Aluminum Conduit Locknuts

Company wide:

American Fittings

EMT Compression Connector, 3/4" Diameter, Insulated, Steel/Zinc

EMT Compression Connector, 3/4 Inch Diameter, Insulated, Concrete Tight, Steel with Zinc Finish, For Use With EMT Conduit

Item #: 115315

CAT #: EC751BUS

UPC: 662364057610

Category: Steel Concrete Tight EMT Compression Connectors

Company wide:

nVent Caddy

EM-M Conduit/Pipe to Flange Clip, Spring St. 1/2", 3/4" EMT, 5/16"–1/2" Flange

Flange- Mount Conduit clips. (Snap-close). 1/2" or 3/4" Hammer-On pipe clip for flanges 5/16" to 1/2". Load limit: 75 lbs. Standard Packaging Quantity: 100.

Item #: 46911

CAT #: 812M58

UPC: 782856172109

Category: Flange-Mount Cable/Conduit Clips

Company wide:

Thomas & Betts

Liquidtight Sealing Gasket With Retainer, 1-1/2" Diameter, Thermoplastic/Stainless Steel

Liquidtight Sealing Gasket With Retainer, 1-1/2 Inch Diameter, Thermoplastic Rubber Gasket With Stainless Steel Retainer Ring

Item #: 7545

CAT #: 5266

UPC: 786210052663

Category: Liquidtight Connectors - Accessories

Company wide:

Power-Strut

Two Hole Corner Angle, Steel/Electro-Galvanized

Two Hole Corner Angle - Electro-Galvanized Finish (EG) Bolt Hole Diameter 9/16"

Item #: 80341

CAT #: PS-604-EG

UPC: 702316501232

Category: 90 Degree Strut Channel Corner Connectors

Company wide:

Appleton

Sealing Fitting, Vertical/Horizontal, 3/4", Explosion-Proof, Malleable

Sealing Fitting, Vertical/Horizontal, 3/4 Inch, Female, Conduit Seal for Close Turning Radius (40% Fill), Malleable Iron.

Item #: 12345

CAT #: EYSEF75

UPC: 781381694292

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Company wide:

nVent Caddy

Cable/Conduit Clip, 3/4", 1" EMT, 1/2", 3/4" Rigid, 1.181" Max

Conduit Hanger 1" EMT to 1/4" and Smaller Rods or Flanges. Standard Packaging Quantity: 100.

Item #: 47824

CAT #: K16

UPC: 782856245162

Category: Conduit Hangers From Wire/Rod & Beam

Company wide:

Power-Strut

Rigid Strut Strap, 1-1/2", Stainless Steel

Standard Strut Strap, Diameter: 1-1/2", Material: Steel, Finish: Stainless Steel. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Item #: 116951

CAT #: PS-1100-1-1/2-SS

UPC: 702316502963

Category: Strut Channel Rigid Conduit Clamps

Company wide:

nVent Caddy

H-MSM Conduit/Pipe to Flange Clip, Side Mount, 1/2", 3/4" EMT, 5/16"–1/2" Flange

Flange Mount Conduit Clip, Snap Type, Accommodates 1/2 to 3/4 Inch Conduit With 5/16 to 1/2 Inch Side Mount Flange, Load Limit 25 Pounds

Item #: 47803

CAT #: 812M58SM

UPC: 782856122104

Category: Flange-Mount Cable/Conduit Clips

Company wide:

Power-Strut

Strut Strap, Universal, 4", Steel

Standard Strut Strap, Diameter: 4", Material: Steel, Finish: Electro Galvanized, EG Fastners, For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Item #: 80112

CAT #: PS-1100-4-EG

UPC: 702316501515

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Eaton B-Line

Rigid Strut Strap, 3/4", Steel, Zinc Plated

Rigid Strut Strap, 3/4 Inch Diameter, Pre-Assembled, Steel with Zinc Plated Finish, For Use With Rigid/IMC Conduit

Item #: 68598

CAT #: B2009PAZN

UPC: 781011610241

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Thomas & Betts

Conduit Locknut, 1" Diameter, Aluminum

Conduit Locknut, 1 Inch Diameter, Aluminum, For Use With Rigid/IMC Conduit

Item #: 39050

CAT #: 143AL

UPC: 786210801193

Category: Aluminum Conduit Locknuts

Company wide:

Thomas & Betts

One-Hole Strap, 3/8", Steel, for RSC/IMC

3/8" Strap, 1-Hole, Material: Steel. For use with: Rigid, IMC.

Item #: 248496

CAT #: 1210-TB

UPC: 786210012100

Category: Steel 1-Hole Conduit Straps

Company wide:

Eaton B-Line

Rigid Strut Strap, 1", Steel, Zinc Plated

Rigid Strut Strap, 1 Inch Diameter, Pre-Assembled, Steel with Zinc Plated Finish, For Use With Rigid/IMC Conduit

Item #: 67906

CAT #: B2010PAZN

UPC: 781011610340

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Power-Strut

Strut Strap, Universal, 2", Steel

Universal Strut Strap, Diameter: 2 Inch, Material: Steel, Finish: Electro Galvanized, .075 Inch Thickness, Universal Clamp for EMT, IMC & GRC.

Item #: 80476

CAT #: PS-1300-2-EG

UPC: 702316500686

Category: Strut Channel EMT Conduit Clamps

Company wide:

Eaton B-Line

Rigid Strut Strap, 2", Steel, Zinc Plated

Rigid Strut Strap, 2 Inch, Steel with Zinc Finish, Pre-Assembled, For Use With Rigid/IMC Conduit

Item #: 272167

CAT #: B2013PAZN

UPC: 781011610647

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Appleton

Pulling Elbow, 1/2", 90°, Female/Female, Gasketed

Pulling Elbow, 1/2 Inch, 90°, Gasketed, Female To Female, Watertight, Malleable Iron, For Use With Rigid/IMC Conduit

Item #: 25981

CAT #: FFL-50

UPC: 781381338806

Category: Iron Rigid Conduit Elbows

Company wide:

Thomas & Betts

Chase Nipple, 3/4", Malleable Iron

Chase Nipple, 3/4 Inch, Malleable Iron, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Item #: 55948

CAT #: 843-TB

UPC: 786210008431

Category: Iron Chase Nipples

Company wide:

nVent Caddy

Cat HP J-hook, pre-galvanized, 1" dia

J-Hook, 1Inch, Steel/Pre-Galvanized Finish

Item #: 110080

CAT #: CAT16HP

UPC: 782856617600

Category: J-Hook - Screw-On

Company wide:

Appleton

Reducing Bushing, Threaded, Malleable, 3" x 2-1/2"

3" to 2-1/2", Reducing Bushing, Threaded, Bushing Material: Malleable Iron.

Item #: 58585

CAT #: RB300-250

UPC: 781381655552

Category: Iron Alloy Reducing Bushings

Company wide:

nVent Caddy

Single Piece Strut Clamp for Cable/Conduit, 1.74"–2.2" OD, 2" EMT 1 1/2" Rigid

One Piece Strut Clamp, With Back Plate. 2" EMT; 1-1/2" Rigid. Static Load Limit: 350 lbs. Standard Packaging Quantity: 50.

Item #: 47394

CAT #: SCH32B

UPC: 782856252375

Category: Strut Channel One Piece Pipe Clamps

Company wide:

nVent Caddy

Cable/Conduit to stud attachment, 1/2", 3/4" EMT, 1 1/2" box depth

Screw on conduit support; attaches 1/2" and 3/4" EMT, conduit, MC/AC to metal or wood stud for 1 1/2 deep box. Standard Packaging Quantity: 100.

Item #: 21330

CAT #: CS812

UPC: 782856326069

Category: Conduit to Stud Supports

Company wide:

nVent Caddy

Single Piece Strut Clamp for Cable/Conduit, 0.72"–1.16" OD, 1" EMT 3/4" Rigid

One Piece Strut Clamp, With Back Plate. 1" EMT; 3/4" Rigid. Static Load Limit: 200 lbs. Standard Packaging Quantity: 100.

Item #: 20688

CAT #: SCH16B

UPC: 782856255161

Category: Strut Channel One Piece Pipe Clamps

Company wide:

Appleton

Rigid Three-Piece Coupling, 2", Threaded, Malleable

Item #: 29457

CAT #: EC-200

UPC: 781381247955

Category: Iron Rigid Conduit Three Piece Couplings

Company wide:

Thomas & Betts

Conduit Locknut, 1/2" Diameter, Aluminum

Conduit Locknut, 1/2 Inch Diameter, Aluminum, For Use With Rigid/IMC Conduit

Item #: 39072

CAT #: 141AL

UPC: 786210801186

Category: Aluminum Conduit Locknuts

Company wide:

American Fittings

EMT Compression Connector, 3/4" Diameter, Insulated, Steel/Zinc

EMT Compression Connector, 3/4 Inch Diameter, Insulated, Concrete Tight, Steel with Zinc Finish, For Use With EMT Conduit

Item #: 115315

CAT #: EC751BUS

UPC: 662364057610

Category: Steel Concrete Tight EMT Compression Connectors

Company wide:

nVent Caddy

EM-M Conduit/Pipe to Flange Clip, Spring St. 1/2", 3/4" EMT, 5/16"–1/2" Flange

Flange- Mount Conduit clips. (Snap-close). 1/2" or 3/4" Hammer-On pipe clip for flanges 5/16" to 1/2". Load limit: 75 lbs. Standard Packaging Quantity: 100.

Item #: 46911

CAT #: 812M58

UPC: 782856172109

Category: Flange-Mount Cable/Conduit Clips

Company wide:

Thomas & Betts

Liquidtight Sealing Gasket With Retainer, 1-1/2" Diameter, Thermoplastic/Stainless Steel

Liquidtight Sealing Gasket With Retainer, 1-1/2 Inch Diameter, Thermoplastic Rubber Gasket With Stainless Steel Retainer Ring

Item #: 7545

CAT #: 5266

UPC: 786210052663

Category: Liquidtight Connectors - Accessories

Company wide:

Power-Strut

Two Hole Corner Angle, Steel/Electro-Galvanized

Two Hole Corner Angle - Electro-Galvanized Finish (EG) Bolt Hole Diameter 9/16"

Item #: 80341

CAT #: PS-604-EG

UPC: 702316501232

Category: 90 Degree Strut Channel Corner Connectors

Company wide:

Appleton

Sealing Fitting, Vertical/Horizontal, 3/4", Explosion-Proof, Malleable

Sealing Fitting, Vertical/Horizontal, 3/4 Inch, Female, Conduit Seal for Close Turning Radius (40% Fill), Malleable Iron.

Item #: 12345

CAT #: EYSEF75

UPC: 781381694292

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Company wide:

nVent Caddy

Cable/Conduit Clip, 3/4", 1" EMT, 1/2", 3/4" Rigid, 1.181" Max

Conduit Hanger 1" EMT to 1/4" and Smaller Rods or Flanges. Standard Packaging Quantity: 100.

Item #: 47824

CAT #: K16

UPC: 782856245162

Category: Conduit Hangers From Wire/Rod & Beam

Company wide:

Power-Strut

Rigid Strut Strap, 1-1/2", Stainless Steel

Standard Strut Strap, Diameter: 1-1/2", Material: Steel, Finish: Stainless Steel. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Item #: 116951

CAT #: PS-1100-1-1/2-SS

UPC: 702316502963

Category: Strut Channel Rigid Conduit Clamps

Company wide:

nVent Caddy

H-MSM Conduit/Pipe to Flange Clip, Side Mount, 1/2", 3/4" EMT, 5/16"–1/2" Flange

Flange Mount Conduit Clip, Snap Type, Accommodates 1/2 to 3/4 Inch Conduit With 5/16 to 1/2 Inch Side Mount Flange, Load Limit 25 Pounds

Item #: 47803

CAT #: 812M58SM

UPC: 782856122104

Category: Flange-Mount Cable/Conduit Clips

Company wide:

Power-Strut

Strut Strap, Universal, 4", Steel

Standard Strut Strap, Diameter: 4", Material: Steel, Finish: Electro Galvanized, EG Fastners, For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Item #: 80112

CAT #: PS-1100-4-EG

UPC: 702316501515

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Eaton B-Line

Rigid Strut Strap, 3/4", Steel, Zinc Plated

Rigid Strut Strap, 3/4 Inch Diameter, Pre-Assembled, Steel with Zinc Plated Finish, For Use With Rigid/IMC Conduit

Item #: 68598

CAT #: B2009PAZN

UPC: 781011610241

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Thomas & Betts

Conduit Locknut, 1" Diameter, Aluminum

Conduit Locknut, 1 Inch Diameter, Aluminum, For Use With Rigid/IMC Conduit

Item #: 39050

CAT #: 143AL

UPC: 786210801193

Category: Aluminum Conduit Locknuts

Company wide:

Thomas & Betts

One-Hole Strap, 3/8", Steel, for RSC/IMC

3/8" Strap, 1-Hole, Material: Steel. For use with: Rigid, IMC.

Item #: 248496

CAT #: 1210-TB

UPC: 786210012100

Category: Steel 1-Hole Conduit Straps

Company wide:

Eaton B-Line

Rigid Strut Strap, 1", Steel, Zinc Plated

Rigid Strut Strap, 1 Inch Diameter, Pre-Assembled, Steel with Zinc Plated Finish, For Use With Rigid/IMC Conduit

Item #: 67906

CAT #: B2010PAZN

UPC: 781011610340

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Power-Strut

Strut Strap, Universal, 2", Steel

Universal Strut Strap, Diameter: 2 Inch, Material: Steel, Finish: Electro Galvanized, .075 Inch Thickness, Universal Clamp for EMT, IMC & GRC.

Item #: 80476

CAT #: PS-1300-2-EG

UPC: 702316500686

Category: Strut Channel EMT Conduit Clamps

Company wide:

Eaton B-Line

Rigid Strut Strap, 2", Steel, Zinc Plated

Rigid Strut Strap, 2 Inch, Steel with Zinc Finish, Pre-Assembled, For Use With Rigid/IMC Conduit

Item #: 272167

CAT #: B2013PAZN

UPC: 781011610647

Category: Strut Channel Rigid Conduit Clamps

Company wide:

Appleton

Pulling Elbow, 1/2", 90°, Female/Female, Gasketed

Pulling Elbow, 1/2 Inch, 90°, Gasketed, Female To Female, Watertight, Malleable Iron, For Use With Rigid/IMC Conduit

Item #: 25981

CAT #: FFL-50

UPC: 781381338806

Category: Iron Rigid Conduit Elbows

Company wide:

Thomas & Betts

Chase Nipple, 3/4", Malleable Iron

Chase Nipple, 3/4 Inch, Malleable Iron, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Item #: 55948

CAT #: 843-TB

UPC: 786210008431

Category: Iron Chase Nipples

Company wide:

nVent Caddy

Cat HP J-hook, pre-galvanized, 1" dia

J-Hook, 1Inch, Steel/Pre-Galvanized Finish

Item #: 110080

CAT #: CAT16HP

UPC: 782856617600

Category: J-Hook - Screw-On

Company wide:

4,499 Items found

Search results

Reducing Bushing, Threaded, Malleable, 3" x 2-1/2"

Single Piece Strut Clamp for Cable/Conduit, 1.74"–2.2" OD, 2" EMT 1 1/2" Rigid

Cable/Conduit to stud attachment, 1/2", 3/4" EMT, 1 1/2" box depth

Single Piece Strut Clamp for Cable/Conduit, 0.72"–1.16" OD, 1" EMT 3/4" Rigid

Rigid Three-Piece Coupling, 2", Threaded, Malleable

Conduit Locknut, 1/2" Diameter, Aluminum

EMT Compression Connector, 3/4" Diameter, Insulated, Steel/Zinc

EM-M Conduit/Pipe to Flange Clip, Spring St. 1/2", 3/4" EMT, 5/16"–1/2" Flange

Liquidtight Sealing Gasket With Retainer, 1-1/2" Diameter, Thermoplastic/Stainless Steel

Two Hole Corner Angle, Steel/Electro-Galvanized

Sealing Fitting, Vertical/Horizontal, 3/4", Explosion-Proof, Malleable

Cable/Conduit Clip, 3/4", 1" EMT, 1/2", 3/4" Rigid, 1.181" Max

Rigid Strut Strap, 1-1/2", Stainless Steel

H-MSM Conduit/Pipe to Flange Clip, Side Mount, 1/2", 3/4" EMT, 5/16"–1/2" Flange

Strut Strap, Universal, 4", Steel

Rigid Strut Strap, 3/4", Steel, Zinc Plated

Conduit Locknut, 1" Diameter, Aluminum

One-Hole Strap, 3/8", Steel, for RSC/IMC

Rigid Strut Strap, 1", Steel, Zinc Plated

Strut Strap, Universal, 2", Steel

Rigid Strut Strap, 2", Steel, Zinc Plated

Pulling Elbow, 1/2", 90°, Female/Female, Gasketed

Chase Nipple, 3/4", Malleable Iron

Cat HP J-hook, pre-galvanized, 1" dia

Reducing Bushing, Threaded, Malleable, 3" x 2-1/2"

Single Piece Strut Clamp for Cable/Conduit, 1.74"–2.2" OD, 2" EMT 1 1/2" Rigid

Cable/Conduit to stud attachment, 1/2", 3/4" EMT, 1 1/2" box depth

Single Piece Strut Clamp for Cable/Conduit, 0.72"–1.16" OD, 1" EMT 3/4" Rigid

Rigid Three-Piece Coupling, 2", Threaded, Malleable

Conduit Locknut, 1/2" Diameter, Aluminum

EMT Compression Connector, 3/4" Diameter, Insulated, Steel/Zinc

EM-M Conduit/Pipe to Flange Clip, Spring St. 1/2", 3/4" EMT, 5/16"–1/2" Flange

Liquidtight Sealing Gasket With Retainer, 1-1/2" Diameter, Thermoplastic/Stainless Steel

Two Hole Corner Angle, Steel/Electro-Galvanized

Sealing Fitting, Vertical/Horizontal, 3/4", Explosion-Proof, Malleable

Cable/Conduit Clip, 3/4", 1" EMT, 1/2", 3/4" Rigid, 1.181" Max

Rigid Strut Strap, 1-1/2", Stainless Steel

H-MSM Conduit/Pipe to Flange Clip, Side Mount, 1/2", 3/4" EMT, 5/16"–1/2" Flange

Strut Strap, Universal, 4", Steel

Rigid Strut Strap, 3/4", Steel, Zinc Plated

Conduit Locknut, 1" Diameter, Aluminum

One-Hole Strap, 3/8", Steel, for RSC/IMC

Rigid Strut Strap, 1", Steel, Zinc Plated

Strut Strap, Universal, 2", Steel

Rigid Strut Strap, 2", Steel, Zinc Plated

Pulling Elbow, 1/2", 90°, Female/Female, Gasketed

Chase Nipple, 3/4", Malleable Iron

Cat HP J-hook, pre-galvanized, 1" dia

About Us

Quick Links