Search results

Grounding Bushing, 5 Inch, Threaded, Insulated, 6 AWG - 250 MCM AWG, Material: Malleable Iron, Lug: Bronze, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Sheathed Cable Connector, Installation (2) Screw Clamp, Trade Size 1-1/2 Inch, Cable Type Non-Metallic Sheathed Cable/Armored Cable/Flexible Cable/Metal Clad Cable, Throat Type Insulated, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Includes Locknut, Clamping Range 0.91 to 1.45 Inch, Overall Dimension 2-3/4 Inch W

Category: Iron NM Cable Connectors

Grounding Bushing, Insulated, Size: 5 Inch, Material: Malleable Iron Or Steel/zinc Plated, Connection Type: Set-screw, Maximum Temperature Rating: 150° C, Features: For Rigid, IMac, Met, Outside Diameter: 6 1/4 Inch, Width: 1 1/4 Inch, Grounding Wire Size Minimum: 6 Wag

Category: Threaded Ground Bushings

3 IN STR SQUEEZE CONN

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2 IN Body Diameter X 5-1/16 IN Overall Length, 2-5/8 IN Turning Radius, 6 OZ Sealing Compound Required, 1/4 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

Reducing Bushing, Threaded, 3/4 Inch x 1/2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Ozg Lr87 3 Mall Lr Condbdy

Category: Type LR Iron Conduit Bodies

OZ-Gedney Clip-On 170 Series Cover, 2-1/2 - 3 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, For Form 7 Conduit Bodies

Category: Steel Conduit Body Covers

Cable Support, Type 1-Piece Plug, Body Type Tapered/Knurled, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 1-1/2 Inch, Cable Type Non-Armored, Number of Conductors 2 to 4 (Same Size), Size 2-5/8 Inch Dia x 2-3/8 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19, With pOZi-grip S-Style Wedging Plug

Category: Iron Rigid Conduit Cable Supports

OZ-Gedney Type CHT Space-Maker Conduit Hub, Size: 3 IN, Malleable Iron, Finish: Zinc Plated, Connection: 3-8 Female Tapered NPSM, Dimensions: 4-3/8 IN Diameter X 3-5/8 IN Length, Box Wall Thickness: 3/16 IN, Third Party Certification: UL File Number E-11853 For Use In Wet Locations, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, NEMA : 4, NEMA : 12, Hazardous Locations: Class I, Division 2/Class III, Division 1, 2 Per NEC 501-4(b), 501.10(b)(4), 502-4(a)(2), 503-3(a), For Rigid Conduit And IMC

Category: Malleable Iron Conduit Hubs

OZ-Gedney Type DX Deflection/Expansion Fitting, Trade Size: 1-1/4 IN, 3.13 IN Outside Diameter, Length: 7-1/4 IN, Flexibility: RMC And IMC, End Couplings: Bronze, Sleeve: Neoprene, Bands: Stainless Steel, Bonding Jumper: Tinned Copper Braid, Enclosure: NEMA 4, UL File Number E-11853, UL 514B, CSA C22.2 No.18.3, CSA 11584, NEMA : FB-1, For Rigid Conduit And IMC

Category: Bronze / Copper Rigid Conduit Expansion Couplings

3 IN PIPE STRAP RGD & IMC

Category: Malleable Iron 1-Hole Conduit Straps

Grounding Bushing, 3",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

OZ-Gedney Type 25 - 38 C Duplex Connector, Size: 3/8 IN (1/2 IN KO), Connection: Male NPS Hub X Set Screw, Conductor Range: 7/32 - 17/32 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 1-1/16 IN Length X 1-9/16 IN Width, 7/16 IN Thread Length, Th

Category: Double Barrel MC / AC Connectors

OZ-Gedney Type KC Center Stopped 4-Screw Clamp Connector, Size: 4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 4-1/16 - 4-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 4-15/16 IN Length X 7 IN Width, Third Party Certification: UL File Number E-11853, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

Grounding Liquidtight Connector, Ground-Tite Series, Straight, 2-1/2 Inch, Lug Size 1 - 4/0 AWG, Malleable Iron/Zinc Plated

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type LR Conduit Body, 1-1/4 IN Hub, Form: 7, Length: 6-1/2 IN, 3-3/16 IN Width, 2-5/16 IN Height, Iron, Finish: Zinc Electroplated With Aluminum Enamel, Gray, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 19.5 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No. 18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2 Per NEC section 501-4(B), NEMA: FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LR Aluminum Conduit Bodies

OZ-Gedney Type 14-G Pipe Strap, Malleable Iron, Finish: Hot Dip Galvanized, 5/8 IN Mounting Hole Width, 1 Holes, 2 IN Width, Length: 8-11/16 IN, 5 IN Height, Trade Size: 4 IN, Third Party Certification: CSA 009795, Applicable Third Party Standards

Category: Malleable Iron 1-Hole Conduit Straps

Knock-out, Diameter 1 1/16 IN, Size: 0.5 IN, Material: Steel, Finish: Zinc Plated

Category: Steel Knockout Seals

OZ-Gedney Type AXB Expansion Fitting With Integral Bond, Trade Size: 3/4 IN, 2-3/4 IN Outside Diameter, Length: 8 IN, Flexibility: RMC And IMC, Body: Ductile Iron, Bonding Jumper: Tinned Copper, Grommets: Neoprene, Third Party Certification: UL File

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 1 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 3/4 IN, 1/2 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed For Hazardous Location Use As Follows: Class I, Division 1, 2, Groups A, B, C, D, Class I, Zone 1, 2, Groups IIA, IIB, IIC, Class II, Division 1, 2, Groups E, F, Glass III, CSA 009795, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, For Outlet Boxes And Hubs

Category: Explosion-Proof Recessed Head Close-Up Plugs

Oz-g 4q-50-fm 1/2 L/t Comb cplg

Category: Steel Rigid To Liquidtight Combination Couplings

OZ-Gedney Type SR Gold Seal Strain Relief Straight Connector, Size: 2 IN, Conductor Range: 1.6 - 1.8 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 1.93 IN Throat Inside Diameter, 5/8 IN Thread Length, Dimensio

Category: Straight Malleable Iron Cord Grips

OZG 4Q50TG

Category: Malleable Iron Liquidtight Flex Connectors