Search results

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1-1/4 IN, Conductor Range: 0.875 - 1 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Bod

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Spec 5 Type C Conduit Body, 2-1/2 IN Hub, Length: 15-1/8 IN, 4-3/8 IN Width, 4 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4/0 AWG) Conductors, 153 CU-IN Volume, Third Party Certi

Category: Type C Iron Conduit Bodies

OZ-Gedney Type EL-9 90 DEG Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 1/2 IN, Connection: Tapered FNPT Hub, Dimension A: 1-1/2 IN, 3/4 IN Turning Radius, Third Party Certification: UL 34997, Hazardous Locations: Class I,

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type KO Knockout Plug, Size: 2 IN, Steel, Finish: Zinc Plated, 2-11/16 IN Diameter, For Closing Unused Opening Or Knockout In Sheet Metal Box, Enclosure Or Cabinet

Category: Steel Knockout Seals

Liquidtight Connector, 45°, 3", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT, RA

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type KO Knockout Plug, Size: 1 IN, Steel, Finish: Zinc Plated, 1-1/2 IN Diameter, For Closing Unused Opening Or Knockout In Sheet Metal Box, Enclosure Or Cabinet

Category: Steel Knockout Seals

OZ-Gedney Type GASK Solid Cover Gasket, Trade Size: 2 IN, Closed-Cell Neoprene, 100 DEG C, For Form 7 Conduit Bodies

Category: Neoprene Conduit Body Gaskets

Conduit Hardware, Bushings, Non-grounding, Type: Plug, Trade Size: 3/4 Inch, Material: Polyethylene, Features: Threaded Rigid And Imc

Category: Non-Metallic Knockout Seals

Oz-g Ce-050 1/2 90d Capped ell

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type 15 Conduit Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 7/8 IN, 1/4 IN Mounting Hole Width, 1 Holes, 9/16 IN Width, Trade Size: 1/2 IN, Dimension A: 1-1/4 IN, Third Party Certification: CSA 104691, Applicable Third Party St

Category: Malleable Iron 1-Hole Conduit Straps

EMT Conduit Connector, Type 3/8 Inch Offset Set Screw, Trade Size 3/4 Inch, Diameter 5/8 Inch, Length 2-3/16 Inch, Thread Length 1/2 Inch, Material Zinc Plated Malleable Iron, Constructional Feature Concrete-Tight, Used On EMT Conduit, Applicable Standard Federal Specification W-F-406E, Includes Locknut

Category: Malleable Iron EMT Set Screw Connectors

Grounding Bushing, Insulated, Size: 1 1/2 Inch, Material: Malleable Iron Or Steel/zinc Plated, Connection Type: Set-screw, Maximum Temperature Rating: 150° C, Features: For Rigid, IMac, Met, Outside Diameter: 2 1/4 Inch, Width: 3/4 Inch, Grounding Wire Size Minimum: 8 Wag

Category: Threaded Ground Bushings

5 IN 3 PC COND CPLG

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 2 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connection:

Category: Threaded Ground Bushings

OZ-Gedney Type ON Offset Nipple, Malleable Iron, Finish: Zinc Electroplated, Length: 1-1/2 IN Body, Trade Size: 1-1/2 IN, Connection: MNPT, 3/4 IN Each End Thread Length, Third Party Certification: UL File Number E-11853, CSA 009797, Applicable Thi

Category: Zinc Die Cast Offset Nipples

OZ-Gedney Type ON Offset Nipple, Malleable Iron, Finish: Zinc Electroplated, Length: 1-1/2 IN Body, Trade Size: 2 IN, Connection: MNPT, 13/16 IN Each End Thread Length, Third Party Certification: UL File Number E-11853, CSA 009797, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit Or IMC

Category: Zinc Die Cast Offset Nipples

TYPE S 4 IN CBL SPRT-1

Category: Iron Rigid Conduit Cable Supports

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1/2 - 29/32 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Length X 1-7/8 IN Width, Third Party Certification: UL File Number E-11852, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

Conduit Sealing Bushing, Conduit Size 1-1/2 Inch, 1-1/4 Inch, Pipe Size 1.66 to 1.9 Inch (Steel Pipe), 1.375 to 1.875 Inch (Cast Iron Pipe), Outer Conduit Diameter 3.068 Inch, Core Drilled Hole 3 Inch, Material PVC Coated Steel Pressure Disc, Used On Pipe, Conduit and Tubing

Category: Rigid & IMC Bushings

Conduit Locknut, Trade Size 3/8 Inch, Diameter 1-1/8 Inch (Across Corner), 1-1/16 Inch (Across Flat), Thickness 1/8 Inch, Material Zinc Plated Steel, Installation 18 TPI Threaded, Knockout Size 3/8 Inch, 1/2 Inch, Used On IMC/Rigid Conduit

Category: Steel Conduit Locknuts

Conduit Sealing Bushing, Type CSML, 2 Inch, 1 to 4 Wire Capacity, Malleable Iron

Category: Rigid & IMC Bushings

Conduit Hardware, Bushings, Insulating, Trade Size: 2 1/2 Inch, Material: Malleable Iron, Connection Type: Set-screw, Maximum Temperature Rating: 150° C,features: For Rigid And Imc, With Aluminum Lug, Outside Diameter: 3 3/8 Inch, Width: 7/8 Inch, Grounding Wire Size Minimum: 14 Awg

Category: Threadless Ground Bushings

OZ-Gedney Type LB Conduit Body, 1 IN Hub, Length: 6-1/8 IN, 1-3/4 IN Width, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Set-Screw, 3 (4 AWG) Conductors, 12.2 CU-IN Volume, Third Party Certification: UL File Number E-18095,

Category: Type LB Aluminum Conduit Bodies

OZ-Gedney Type 300R Hex Reducing Bushing, Size: 1-1/2 X 1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded, 2-3/8 IN Width Across Corners, 15/16 IN Thread Length, Flange Thickness: 5/16 IN, Third Party Certification: UL File Nu

Category: Iron Alloy Reducing Bushings