Search results

Conduit Bushings, Insulated, Threaded, 4 Inch, Malleable Iron/Zinc Plated Body, Thermoplastic Insulator With Maximum Temperature Rating of 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 2-1/2 IN, Conductor Range: 1.625 - 2 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated

Category: Straight Malleable Iron Cord Grips

Conduit Hardware, Bushings, Insulating, Trade Size: 2 Inch, Material: Malleableiron, Connection Type: Set-screw, Maximum Temperature Rating: 150° C, Features: For Rigid And Imc, With Bronze Lug, Outside Diameter: 2 13/16 Inch, Width:3/4 Inch, Grounding Wire Size Minimum: 14 Awg

Category: Threadless Ground Bushings

2-1/2 AND 3 IN FORM7 CAST CVR

Category: Steel Conduit Body Covers

OZ-Gedney Type AC 90 DEG Center Stopped Squeeze Connector, Size: 3-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 3-45/64 - 4-5/32 IN, Malleable Iron, Finish: Zinc Electroplated, 1-1/4 IN Thread Length, Dimension A: 10-1/4 IN, Dim

Category: 90 Degree Two Screw Squeeze Flex Connectors

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3 IN, 4-3/16 IN Outside Diameter, Length: 3-5/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third P

Category: Iron Rigid Conduit Three Piece Couplings

OZG 4Q200TG HDG 2" ST CONN

Category: Malleable Iron Liquidtight Flex Connectors

2 IN 2 SCREW CONN INSUL

Category: Straight Squeeze Flex Connectors

Insulating Bushing With Steel Locknut, 2-1/2 Inch, Non-Metallic

Category: Rigid & IMC Bushings

OZ-Gedney Type T Conduit Body, Cover And Gasket Assembly, 2 IN Hub, Length: 10-5/8 IN, 3-3/8 IN Height, Conduit Body: Die-Cast, Copper-Free Aluminum, Cover: Type BS Aluminum, Gasket: Type SGN Neoprene, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (2/0 AWG) Conductors, 75 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type T Iron Conduit Bodies

OZ-Gedney Type LL Conduit Body, Cover And Gasket Assembly, 1-1/4 IN Hub, Length: 7-7/8 IN, 2-5/8 IN Height, Conduit Body: Die-Cast, Copper-Free Aluminum, Cover: Type BS Aluminum, Gasket: Type SGN Neoprene, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 34 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LL Aluminum Conduit Bodies

1-1/2 IN ALUM LL COND BODY

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type 300R Hex Reducing Bushing, Size: 2-1/2 X 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded, 3-1/4 IN Width Across Corners, 15/16 IN Thread Length, Flange Thickness: 7/16 IN, Third Party Certification: UL File Numb

Category: Iron Alloy Reducing Bushings

Conduit Body, Type: LR, Size: 1-1/2 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type LR Iron Conduit Bodies

Conduit Body with Cover/Gasket, Type: T, Size: 1/2 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type T Iron Conduit Bodies

Cable Support, Type 1-Piece Plug, Body Type Tapered/Knurled, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 2 Inch, Cable Type Non-Armored, Number of Conductors 5 (Different Size), Size 3-1/8 Inch Dia x 2-5/8 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19, With pOZi-grip S-Style Wedging Plug

Category: Iron Rigid Conduit Cable Supports

1 IN 45 DEG CONN LFMC W/LUGS

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type HBLG Insulated Grounding Bushing, Size: 3/4 IN, Steel Body, Stainless Steel Screws, Finish: Hot Dip Or Mechanically Galvanized, Connection: Set-Screw, 150 DEG C, 1-3/8 IN Outside Diameter, 5/8 IN Width, 14 - 4 AWG Grounding Wire,

Category: Threaded Ground Bushings

OZ-Gedney Type SBLG Insulated Grounding Bushing, Size: 2 IN, Malleable Iron Body, Stainless Steel Clamping Tension Body, Stainless Steel All Screws, Finish: Zinc Plated Body, Tin Plated Copper Grounding Saddle, Connection: Set-Screw Threadless,

Category: Threadless Ground Bushings

TYPE S 3-1/2 IN CBL SPRT BDY

Category: Iron Rigid Conduit Cable Supports

Rigid Conduit Body, Access Opening Left Side, Configuration LL, Hub Location 90 Deg, Number of Hubs 2, Hub Size 3-1/2 Inch, Size 16-3/4 Inch L x 5-5/8 Inch W, Installation Threaded, Material Zinc Electroplated Aluminum Enameled Malleable Iron, Approval UL 514A, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification A-A-50563, NEMA FB-1/FB-2.10, Capacity 292 Cu Inch

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 4 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 6-1/8 IN Width, 3-1/2 IN Height, Third Party Certification: UL File Number 11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Pipe Strap, 1-Hole, Size: 1 Inch, Material/Finish: Steel/Zinc, For Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

OZ-Gedney Type EYAM Vertical/Horizontal Sealing Fitting, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 2-3/4 IN Body Diameter X 8-1/2 IN Overall Length, 3-1/4 IN Turning Radius, 1

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings