Search results

Threaded Conduit Locknut, 1 Inch, Heavy Stock Steel, Zinc Plated, for Rigid Conduit & IMC, 3/16" Thick.

Category: Steel Conduit Locknuts

Features: Concrete Tight, Male Hub 7/16 In Thread, Application: Threadless Rigidconduit And Imc, Standard: Ul 514b, Fed Spec./cid: A-a-50553, Ansi/NEMA: Fb-1, Trade Size: 0.5in, Outside Diameter: 1.25in, Length: 0.96875in,material: Malleable Iron

Category: Iron Rigid Conduit Set Screw Connectors

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 1 Inch,for Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 3 Inch,for Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Reducing Bushing, Steel, 1-1/2 x 1/2 Inch, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 4 Inch,for Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Conduit Bushings, Threaded, 3-1/2 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

OZ-Gedney Type EFL Concrete Slab Electroform 90 DEG Conduit Insert, Size: 3/4 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 2-3/16 IN Base Diameter X 3-1/16 IN Base To Conduit Center X 3-11/16 IN Height, 3-13/16 IN Turning Radius, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA: C22.2 No.18, Federal Specification W-F-408E, For Concrete Slabs 6 IN Thickness And Up, Threaded Rigid Conduit And IMC

Category: Iron Rigid Conduit Elbows

Conduit Bushings, Insulated, Threaded, 2 Inch, Malleable Iron/Zinc Plated Body, Thermoplastic Insulator With Maximum Temperature Rating of 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

Conduit Bushing, Threaded, 2 Inch, Malleable Iron/Zinc Plated, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Grounding Bushing, 2",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

Pulling Elbow, Capped, 90°, 1-1/2 Inch, Explosion-Proof, Female/Female, Screw-On Cap, Malleable Iron, For Use in Hazardous/Ordinary Locations For Pulling Conductors and/or Rigid/IMC Conduit

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

Conduit Bushing, Insulating, 3-1/2 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 1 1/4 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Liquidtight Grounding Connector, Straight, Insulated, 3/4 Inch, Malleable Iron/Zinc

Category: Malleable Iron Liquidtight Flex Connectors

Cord Grip, Strain Relief, Size: 3/4 Inch, Cable Range: 0.400 - 0.500 Inch, Malleable Iron

Category: 90° Malleable Iron Cord Grips

OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-13/16 IN, Trade Size: 1 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1, 2,

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

Conduit Bushing, Insulating, 1 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Grounding Bushing, 2-1/2 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Thermoplastic Insulator Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 1 1/2 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Conduit Bushings, Threaded, 1-1/4 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded NPT, Body Thick: 3/4 IN, 3/4 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For

Category: Explosion-Proof Recessed Head Close-Up Plugs

OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-7/8 IN Body Diameter X 5-1/16 IN Overall Length, 2 IN Turning Radius, 6 OZ Sealing Compound

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

AC/Flex Connector, 90°, Squeeze, 3", Malleable

Category: 90 Degree Two Screw Squeeze Flex Connectors