Search results

OZ-Gedney Clamp Back, Size: 2-1/2 IN, 3/8 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 5-3/4 IN Length X 2-1/2 IN Width, 1/32 IN Hole, Dimension E: 5/8 IN X 1-1/8 IN, Third Party Certification: CSA 009795, Applicable Thi

Category: Clamp Backs - Iron

HALO CONDUIT BODY

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type TNS Threaded Conduit End Bell, Size: 4 IN, Malleable Or Ductile Iron, Finish: Hot Dip Galvanized, Dimensions: 7-3/8 IN Diameter X 3-9/16 IN Length, 2-7/8 IN Bell, For Rigid Conduit And IMC

Category: PVC Bell Ends

Conduit Hardware, Bushings, Insulating, Trade Size: 3/4 Inch, Material: Malleable Iron or Steel/Zinc Plated, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, Outside Diameter: 1 3/8 Inch, Width: 5/8 Inch,

Category: Threadless Ground Bushings

OZ-Gedney Type ICC Phenolic Insulating Coupling, Trade Size: 1/2 IN, 1-1/8 IN Outside Diameter, Length: 1-3/8 IN, Flexibility: RMC And IMC, Canvas Base Phenolic, Connection: Threaded, Black, For Rigid Conduit And IMC

Category: Bakelite / Phenolic Rigid Conduit Couplings

Liquidtight Connector, 45°, 3", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT, RA

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type SR9 Gold Seal Strain Relief 90 DEG Connector, Size: 1/2 IN, Conductor Range: 0.2 - 0.3 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 0.5 IN Throat Inside Diameter, 7/16 IN Thread Length, Dimensi

Category: 90° Malleable Iron Cord Grips

OZ-Gedney Type BLG Insulated Grounding Bushing, Size: 1/2 IN, Steel Body, Stainless Steel Screws, Finish: Zinc Plated, Connection: Set-Screw, 150 DEG C, 1-1/8 IN Outside Diameter, 1/2 IN Width, 14 - 4 AWG Grounding Wire, 1-1/8 IN Turning Radius W

Category: Threaded Ground Bushings

Oz-g Ce-050 1/2 90d Capped ell

Category: Iron Rigid Conduit Elbows

Grounding Bushing, 3-1/2 Inch, Threaded, Insulated, Rated 150° Celsius, Malleable Iron-Zinc Plated, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type CHM Raintight Conduit Hub, Size: 3 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 3-8 Tapered FNPT, Dimensions: 4-5/8 IN Diameter X 2-3/4 IN Length, Box Wall Thickness: 5/8 IN, Third Party Certification: UL File

Category: Malleable Iron Conduit Hubs

OZ-Gedney Type LB Conduit Body, 2-1/2 IN Hub, Form: 7, Length: 10-1/2 IN, 4-1/4 IN Width, 5-1/8 IN Height, Iron, Finish: Zinc Electroplated With Aluminum Enamel, Gray, Connection: Tapered FNPT, 3 (3/0 AWG) Conductors, 102 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2 Per NEC Section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LB Aluminum Conduit Bodies

OZ-Gedney Type J Conduit Clamp, 2 IN Cable, Cable Type: IMC, EMT, Malleable Iron, Steel Bolt, Finish: Mechanically Galvanized, Dimensions: 3-5/16 IN Length X 2-1/16 IN Depth X 5 IN Height, Dimension D: 3-7/16 IN, 1/2-13 X 1-3/4 IN Length Bolt, Third Party Certification: CSA 009795, Applicable Third Party Standards: CSA C22.2 No.18, For Securing Rigid Conduit, IMC, EMT And Flexible Metal Conduit

Category: Malleable Iron EMT Right Angle Type K-Clamps

OZ-Gedney Spec 5 Type X Conduit Body, 1-1/4 IN Hub, Length: 9-1/8 IN, 3-1/2 IN Width, 2-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 32 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1 Division 2 Per NEC Section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type X Iron Conduit Bodies

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 3 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connection:

Category: Threaded Ground Bushings

Conduit Bushing, Insulated, Size: 1 1/4 Inch, Material: Steel/Zinc Plated, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

OZ-Gedney Type PG Armored/Metal Clad Cable Connector, Size: 3/4 IN, Conductor Range: 1.03 - 1.21 IN, Malleable Or Ductile Iron, Finish: Zinc Plated, 9/16 IN Thread Length, Dimensions: 1-15/16 IN Maximum Diameter X 2-5/8 IN Length, 0.85 IN Cable Core Diameter, Dimension B: 2-5/8 IN, Third Party Certification: UL File Number E-36853, CSA 15553, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406B, For Jacketed Metal Clad Cable Such As Interlocked Armor, Corrugated Metal Sheath, Smooth Aluminum Sheath And Similar Types

Category: Stainless Steel Cable Glands

Reducing Bushing, Size: 2-1/2 x 2 Inch, Material: Aluminum

Category: Aluminum Reducing Bushings

OZG 28-500 5" SSCR RGD COND C

Category: Iron Rigid Conduit Set Screw Connectors

Conduit Bushings, Insulated, Size: 1 Inch, Material: Malleable Iron, Connection Type: Threadless, Maximum Temperature Rating: 150 Degree Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

Rigid Conduit Body, Access Opening Left Side, Configuration LL, Cover Type Aluminum, Hub Location 90 Deg, Number of Hubs 2, Hub Size 1 Inch, Size 6-1/8 Inch L x 2 Inch H, Installation Threaded, Material Die-Cast Enameled Copper Free Aluminum Body, Neoprene Gasket, Approval UL 514A, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification A-A-50563, NEMA FB-1/FB-2.10, Capacity 12.2 Cu Inch

Category: Type LL Aluminum Conduit Bodies

Grounding Bushing, Specification Grade, 3 Inch, Threaded, Insulated, Malleable Iron/Hot Dipped Galvanized Body and Copper Lay-In Lug 6 - 4/0 AWG, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type TNS Threaded Conduit End Bell, Size: 3 IN, Malleable Or Ductile Iron, Finish: Hot Dip Galvanized, Dimensions: 6-3/8 IN Diameter X 3-1/8 IN Length, 2-3/8 IN Bell, For Rigid Conduit And IMC

Category: PVC Bell Ends

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1-1/4 IN, Conductor Range: 0.875 - 1 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Bod

Category: Straight Malleable Iron Cord Grips