Search results

Features: Concrete Tight, Male Hub 5/8 In Thread, Application: Threadless Rigidconduit And Imc, Standard: Ul 514b, Fed Spec./cid: A-a-50553, Ansi/NEMA: Fb-1, Trade Size: 1.5in, Outside Diameter: 2 375in, Length: 1.75in,material: Malleableiron

Category: Iron Rigid Conduit Set Screw Connectors

Conduit Clamp, Size: 1 Inch, Right Angle, Material: Malleable Iron, Finish: Hot Dipped Galvanized, Mechanically Galvanized Hardware

Category: Malleable Iron EMT Right Angle Type K-Clamps

Conduit Bushing, Insulating, 3/4 Inch, Threaded, Plastic, Rated 105 Degrees Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Liquidtight Connector, 45°, 3/4 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 3/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 29/32 - 1-5/64 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-1/8 IN Length X 1-3/4 IN Width, 1/2 IN T

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type C Center Stopped Straight Squeeze Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 25/32 - 15/16 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Length X 15/16 IN Width, 1/2 IN Thread Length, Third Party Certification: UL File Number E-11852, UL Listed (Flexible Metal Conduit), CSA 009795 (Armored Cable), Hazardous Location: NEC 501-4(b), Class I, Division II, NEC 350-5 (Grounding Means), Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable And Flexible Metal Conduit

Category: Single Barrel MC / AC Connectors

Liquidtight Connector, 90°, 2 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, Applicable Standard Federal Specification WF-406E, NEMA; Application Hazardous Location; Environmental Condiotions Oil Tight

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Pulling Elbow, Capped, 90°, 1-1/2 Inch, Explosion-Proof, Female/Female, Screw-On Cap, Malleable Iron, For Use in Hazardous/Ordinary Locations For Pulling Conductors and/or Rigid/IMC Conduit

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

OZ-Gedney Type 9000W EMT Combination Coupling, Trade Size: 1/2 IN, 1-1/4 IN Outside Diameter, Length: 1-5/8 IN, Flexibility: EMT And Flexible Steel Conduit, Malleable Iron, Connection: Compression X Screw Clamp, Third Party Certification: UL File N

Category: Malleable Iron EMT To Flex Combination Couplings

Liquidtight Connector, 90°, 3", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT, RA

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Conduit Bushings, Insulated, Threaded, 1-1/2 Inch, Malleable Iron/Zinc Plated Body, Thermoplastic Insulator With Maximum Temperature Rating of 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

Sealing Fitting, Vertical/Horizontal, 2 Inch, Explosion-Proof, 25% Fill, Female, Aluminum, For Use with Rigid/IMC Conduit

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Grounding Bushing, 1 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Bronze Lug 14 - 4 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type SGN Solid Cover Sealing Gasket, Trade Size: 1/2 IN, 1/8 IN Thick, Closed-Cell Neoprene, 100 DEG C, Dimensions: 3-15/16 IN Length X 1-15/16 IN Width, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

OZ-Gedney Type RB Reducing Bushing, Size: 1-1/2 X 1-1/4 IN, Steel, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 13/16 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups

Category: Steel Reducing Bushings

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 1-1/4 IN, 2-3/8 IN Outside Diameter, Length: 2-3/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Thir

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 5/16 IN Height, 2-3/8 IN Width, Size: 1-1/2 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Pa

Category: Gasketed Conduit Locknuts

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 4 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concretetight

Category: Rigid Compression Couplings - Iron

Features: Body Length 1 3/16 In, Thread Length 7/16 In, Diameter 1 3/8 In, Cablerange 0.5 To 0.6 In, Standard: Ul, Csa, Size: 0.75in, Material: Malleable Iron,finish: Zinc Plated

Category: Straight Malleable Iron Cord Grips

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 3/4 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concretetight

Category: Iron Rigid Conduit Set Screw Couplings

OZ-Gedney Type MF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-1/4 IN, Trade Size: 3/4 IN, Connection: FNPT X MNPSM, 1-1/2 IN Height, 1/2 IN Thread Length, Third Party Certification: UL File Number E-

Category: Iron Rigid Conduit Elbows

Conduit Body, Type LL, 3/4 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LL Iron Conduit Bodies

Features: Length 5 In, Application: Rigid Conduit, Imc, Standard: Ul 886, Csa C22.2, Nec, Size: 2in, Material: Copper Free Aluminum

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Conduit Body, Type LR, 1 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LR Iron Conduit Bodies