Search results

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

ROB PRSTAG10 4 AL KNOCKOUT HUB W/GRND

Category: PVC Coated Conduit Hubs with Ground

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRNIP-AL-2-1/2X4 2-1/2X4 AL NIPPLE

Category: PVC Coated Nipples

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type TB Conduit Bodies

ROB PRPLG45 1-1/4 SQUARE HEAD PLUG

Category: Explosion-Proof Square Head Close-Up Plugs

ROB PRRE85 3 - 1-1/2 REDUCING BUSHING

Category: PVC Coated Reducing Bushings

Liquidtight Connector, 45° Angle, Size: 4 inch, Material: PVC Coated Steel.

Category: 45 Degree PVC Coated Type LT Connectors

UL Listed Standard 6

Category: PVC Coated Couplings

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Hanger Rod Beam Clamp : to attach a single all thread rod to a beam or structural member

Category: PVC Coated Conduit Support Straps

ROB ROY PRHNIP112X5 NIPPLE

Category: PVC Coated Nipples

Conduit Body Cover, Type: FM7, Size: 1 1/2 inch, Material: PVC Coated Aluminum.

Category: PVC Coated Conduit Body Covers

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

ROB PRSSP50 1/2 SPLIT COUPLING

Category: PVC Coated Split Couplings

Plasti-Bond OE Series Conduit Outlet Boxes are installed in hazardous location conduit systems to serve as pulling and splicing fittings, to connect runs of conduit, to change the direction of a conduit run, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit system is maintained across assembled joints."

Category: PVC Coated Type LB Conduit Bodies

Conduit Clamp Edge Style, Size: 3/4 inch, Material: PVC Coated Steel.

Category: PVC Coated Edge Beam Clamps

3-1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PREYD4SA 1-1/4 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PREYD9SA 3-1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

Liquidtight Connector With Ground, Straight Angle, Size: 1 inch, Material: PVC Coated Steel.

Category: Straight PVC Coated Type LT Connectors

ROB PREYD7SA 2-1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRPLG25 3/4 SQUARE HEAD PLUG

Category: Explosion-Proof Square Head Close-Up Plugs

ROB PRHNIP-1/2X6 1/2X6 NIPPLE

Category: PVC Coated Nipples

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies