Search results

Parallel Beam Clamp, 1/2 Inch, Material: Ferrous Metal, PVC Coated

Category: PVC Coated Parallel Beam Clamps

Nipple, Diameter: 1-1/2 inch, Length: 4 inch, Material: PVC Coated Steel.

Category: PVC Coated Nipples

Plasti-bond El Style Malleable Elbows Are Used In A Conduit Run To Change Direction 90° Or To Terminate At A Fitting Or Box. They Are Available With Male Threads Only, Female Threads Only, Or Male And Female Threads."

Category: 90 Degree PVC Coated Type LT Connectors

Rob-r Prre51 1-1/2 - 1/2 Redu

Category: PVC Coated Reducing Bushings

ROB-RY PRHNIP-1XCL 1XCL NIP

Category: PVC Coated Nipples

Rob-r Prhnip-1x8 1x8 Nipple

Category: PVC Coated Nipples

GLL Grounding Bushings GLL style PVC coated threaded grounding bushings have an aluminum lug for copper or aluminum grounding conductors. RE Reducers RE style reducers reduce conduit hubs to a smaller size. They are provided with an integral bushing to prevent conductor damage and full, clean cut threads for ease of assembly. All RE reducers are coated inside and out with polyurethane for corrosion protection. PLG Plugs PLG style plugs are used to close unused conduit hubs. They are available with either recessed square drive sockets or raised square drive heads. All PLG plugs are completely coated with polyurethane for corrosion protection.

Category: PVC Coated Reducing Bushings

ROB PRHNIP-1-1/2X2 1-1/2X2 NIPPLE

Category: PVC Coated Nipples

RRY PRHNIP 3X6

Category: PVC Coated Nipples

Conduit Body, Type: TB, FM7, Size: 1/2 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type TB Conduit Bodies

Plasti-Bond PVC coated pipe straps are used to securely mount conduit to a wall or other structure for support. They are available in two styles: a one-hole malleable iron strap or a two-hole stamped steel strap. Mounting hardware not provided.

Category: PVC Coated 1-Hole Conduit Straps

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Rob-r Prlb87sa 3 Al Form 7 Lb

Category: PVC Coated Type LB Conduit Bodies

RRYPRLBD2200SA 3/4 Inch LBD Aluminum Pulling Elbows

Category: PVC Coated Type LB Conduit Bodies

Rob-r Pbu-bolt-2 2 Coated Ste

Category: PVC Coated Conduit Support Straps

Rob-r Prt77sa 2-1/2 Al Form 7

Category: PVC Coated Type T Conduit Bodies

Rob-r Prlbd10900 4 Pulling El

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduitsubject To Longitudinal Movement, Including That Caused In Long Runs By Thermalexpansion And Contraction.

Category: PVC Coated Expansion Couplings

3 Mall 1 Hole Pipe Strap

Category: PVC Coated 1-Hole Conduit Straps

Plasti-bond Unf Unions Are Used To Connect Conduit To Conduit Or To Allow For Future Changes To The Conduit System. Female Threads Are Provided At Each End. Plasti-bond Uny Unions Are Used To Connect Conduit To A Conduit Fitting, Junction Box, Or Device Enclosure. One End Is A Male Thread And The Other Is Female.

Category: PVC Coated Female-Female Unions

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduitsubject To Longitudinal Movement, Including That Caused In Long Runs By Thermalexpansion And Contraction.

Category: PVC Coated Expansion Couplings

Rob-r Prxjg74 2-1/2 Expansion

Category: PVC Coated Expansion Couplings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples