Search results

Reducing Washer, 1-1/4 x 1/2 Inch, Steel

Category: Reducing Washers

Press On Plate for wood or metal studs. Hole size 3/16". Dimensions: 3-1/8" x 1-1/2". Standard Package Quantity: 100.

Category: Snap-On Safety Plates

THB TY546M CABLE TIE 50LB 7IN , 100/PK

Category: Cable Tie Marker & Flag Ties

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 4.13 IN Outside Diameter, 2.97 IN Inside Diameter, 3 X 2-1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22

Category: Reducing Washers

Push-Barb Cable Tie Mount, Maximum Panel Thickness of 0.13” (3.2mm) and a Panel Hole of 0.25” (6.4mm), Nylon 6.6, Natural, Package of 1000

Category: Cable Clamps & Clips

Cable Tie, 4 Inch Long, UL Rated, 18lb Tensile Strength, PA66, Black, 100/pkg

Category: Non-Releasable Cable Ties

Latching Flat Cable Mount, Adhesive, For 1.05" Ties, Gray, 1.05" x 2.90" Long

Category: Cable Tie Bases

Reducing Washer, 1-1/4 x 3/4 Inch, Steel

Category: Reducing Washers

Electrical Color Coding Tape, Vinyl, 1/2 Inch x 20 Foot Length, 7 mm Thickness, 600 Volt, Temperature Rating: 221°F, gray

Category: Color Coding Tape

Reducing Washer, Steel, 2" x 1"

Category: Reducing Washers

Reducing Washer, 2 x 1-1/4 Inch, Steel

Category: Reducing Washers

Wedge Anchor Full Thread. Anchor Hole DIA: 1/4"-20. Overall Length: 1-3/4". Thread Length: 3/4". Zinc Plated Steel. Box Quantity: 100. *Dottie Part # 59300.*

Category: Hammer-In Wedge Anchors

Linerless Splicing Compound, Scotch, Unprinted. Size: 1-1/2" Width, 15' Length. Thickness: 30 mils. Temperature Rating: 194°F. Color: Black.

Category: Linerless Rubber Splicing Tape

Cable Tie, 8" Long, UL Rated, 50lb Tensile Strength, PA66, Black, 100/PK

Category: Non-Releasable Cable Ties

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 1-3/4 IN Outside Diameter, 0.88 IN Inside Diameter, 1 X 1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Plain Edge Cable Clamp, Natural Nylon 6.6 for Temperatures up to 85 Degrees Celsius (185 F), Width of 9.53mm (0.375 Inches), Thickness of 1.27mm (0.50 Inches), Hole Diameter of 4.3mm (0.170 Inches), #8 Screw Mounting with Closed Diameter of 11.1mm (0.437 Inches), Bulk Pack

Category: Cable Straps

THB TY5418PX CBL TIE 150LB 18

Category: Releasable Cable Ties

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3-1/2 IN Outside Diameter, 2.45 IN Inside Diameter, 2-1/2 X 2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C2

Category: Reducing Washers

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3 IN Outside Diameter, 1.73 IN Inside Diameter, 2 X 1-1/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Plastic Insulated Service Entrance Straps, #2 SER and 3/4 Inch EMT, 25/Bag

Category: Cable Straps

Insulating Varnished Cambric Tape with Pressure-Sensitive Adhesive, Scotch, Unprinted. Size: 1-1/2" Width, 108' Length. Thickness: 8 mils. Temperature Rating: 220°F. Color: Yellow.

Category: Varnished Cambric Tape

Plastic Insulated Cable Staple, Non-Stackable. Size: 1/2". Zinc-Plated Nails. For use with: Wider Cable. Package Quantity: Bucket of 5000.

Category: Cable Staples

Violet - Vinyl Electrical Color Coding Tape. Size: 1/2" Width, 20' Length. Thickness: 7 mils. 600V. Temperature Rating: 221°F, Scotch, Professional Use

Category: Color Coding Tape

Wedge Anchor Full Thread, Anchor Hole DIA: 1/2"-13, Overall Length: 4", Thread Length: 2-3/4", Zinc Plated Steel, Box Quantity: 50, *Dottie Part # 59314*

Category: Hammer-In Wedge Anchors