Search results

Wall mounting bracket, material: Stainless steel 1.4404 (AISI 316L), supply includes: Assembly parts for mounting on the enclosure. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

RIT 1564800 KX MOUNTING PLATE

Category: Enclosure Mounting Bracket Kits

Fan Shroud, NEMA 4/12, 9.5 Inch x 7 Inch x 2 Inch, Carbon Steel

Category: Enclosure Cooling Fan Shroud Kits

VX MOUNTING PANEL 2000H0800W

Category: Enclosure Back Panels

RIT 8618304 VX LOCK INSERT SC

Category: Enclosure Key Inserts

0100H1800W VX PLINTH RAL9005

Category: Enclosure Housing Bases

Captive nuts, description: Used on enclosures and rails with rectangular system punching 12.5 x 10.5 mm. The nuts are inserted from the same side as screw-fastening takes place. Packaging Unit: 50 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

RIT 3322720 SK PLEATED FILTER

Category: Enclosure Louver Plate Filters

Threaded blocks, description: Used on enclosures and rails with rectangular system punching 12.5 x 10.5 mm with snap-off insertion aid, die-cast zinc. Packaging Unit: 50 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

Threaded blocks, description: Used on enclosures and rails with rectangular system punching 12.5 x 10.5 mm with snap-off insertion aid, die-cast zinc. Packaging Unit: 50 pc(s).

Category: Enclosure Mounting Bracket Kits

TopTherm Filter Fan Unit, 230 Volt, 323 x 323 x 25mm, Complete Unit Ready For Connection Including Filter Mat

Category: Enclosure Cooling Fan & Exhaust Packages

Captive nuts, description: Used on enclosures and rails with rectangular system punching 12.5 x 10.5 mm with compression spring, designed as an insertion aid for reliable mechanical and electrical connection in the system punchings. Packaging Unit: 50 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

CABLE RAIL ADAPTER F/PLINTH

Category: Enclosure Mounting Bracket Kits

Used on enclosures and rails with rectangular 12.5 x 10.5 mm system punching with compression spring as an insertion aid to ensure reliable mechanical and electrical connection in the system punchings.

Category: Enclosure Clip / Clamp Nut Packages

TEMPERATURE SENSOR; AIR INLET FOR 3302/03/04/05/28/29; L=150MM

Category: Enclosure Temperature Control Switches

Electrical Interlock, 120 Volt AC, Locks Door When Main Switch ON

Category: Enclosure Mechanical Interlocks

1000X0500 PARTIAL MPL

Category: Modified Sub-Panels

TS Lock Component for TS/IT/SE Series, Die Cast Zinc, Includes Assembly Screws

Category: Enclosure Clip / Clamp Nut Packages

RIT 5051032 VX MOUNTING PANEL

Category: Enclosure Mounting Bracket Kits

Fine filter mats, for fan-and-filter units, material: Chemical fibres Packaging Unit: 5 pc(s).

Category: Enclosure Cooling Fan & Exhaust Packages

Wall mounting bracket, material: Stainless steel 1.4301 (AISI 304), supply includes: Assembly parts for mounting on the enclosure. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

Base/plinth components, front and rear, 200 mm, Sheet steel, for TS, TS IT, SE, CM, TP, PC, IW, Solid, material: Base/plinth components: Sheet steel, Cover caps: Plastic, surface: Spray-finished, color: RAL 7022, Cover caps: RAL 9005, supply includes: 2 base/plinth components, 4 cover caps, Assembly parts, description: Base/plinth component consisting of one trim panel and two pre-configured corner pieces. In 200 mm high base/plinth components, one trim panel is divided into two for cable entry. Packaging Unit: 2 pc(s).

Category: Enclosure Housing Bases

Circuit-breaker component adaptors, 3-pole, material: Polyamide (PA 6.6), Fire protection corresponding to UL 94-V0, color: RAL 7035, description: Circuit-breaker adaptor for universal, simplified assembly of circuit-breakers up to 630A.

Category: Operator Adapters For Preferred Cutouts

Enclosure Keys, 3524 E Series, For Use With Lock Inserts

Category: Enclosure Key Inserts