Connectors, Crimps, & Termination

Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 - 2 AWG, 1/2 - 1 Inch Water Pipe

Category: Bare Wire Ground Clamps

The vibration resistant male tab disconnect is made of brass and is nickel-plated. It is fully insulated in a blue, nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm¦). It is 0.90" (22.9 mm) long and 0.42" (10.7 mm) wide. The disconnect has a funnel entry configuration and a butted seam barrel. It comes in bottles of 50.

Category: Male Nylon Insulated Wire Disconnects

Wire Joint, Nylon Insulated, (3) 14 AWG - (4) 12 AWG, White

Category: Crimp Cap Insulators

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Same Side, Number of Ports: 2, Wire Range: 14 AWG - 1/0 AWG, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors. 6 Each per Carton

Category: Dual Sided Entry Wire Connector Blocks

Spade Terminal, Vinyl Insulated, #10 Fork, 12-10 AWG, Yellow, Package of 50 Each.

Category: Vinyl Insulated Standard Fork Terminals

Multi-Tap Connector, Aluminum, Insulated, 2 Port, 2 Sided Entry, 4 AWG to 600 MCM, 600 Volt, AL/CU Rated

Category: Dual Sided Entry Wire Connector Blocks

Mechanical Grounding Connector, Type L, Single Conductor, 1-Hole, 13/32 Inch Stud, 6 AWG - 250 MCM, Copper

Category: 1-Conductor Copper Mechanical Lugs

Compression Lug, Copper, 1 Hole without Inspection Window, 2/0 AWG, 3/8" Stud, Long Barrel, Tin Plated.

Category: 1-Hole Long Barrel Copper Compression Lugs

Butt Splice, Crimp, Vinyl-Insulated, 16-14 AWG, Blue, Package of 50 Each

Category: Vinyl Insulated Butt Connectors

Wire Connector, Color Coded with Flexible Skirt, Color: Orange/Blue, Wire Range: 2#22-3#12 or 3#14, Includes: Internal Square Wire Spring, For Use With Copper-to-Copper Connections Only. Package of 100 Each.

Category: Color Coded Twist On Wire Connectors

Cold Shrink, Connector Insulators, Shielded Cable, 1 kV, Conductor Range: 10 AWG - 1/0 AWG, Insulation Diameter Range: 0.10" - 0.82", Relaxed Tube Length: 8.0". For use with all Solid Dielectirc (rubber and plastic) insulated wires and cable under 1000 Volts in Indoor, Outdoor, Direct Burial and Submersible Applications.

Category: Low Voltage Cold Shrink Connector Insulators

Compression Lug, Copper, 1-Hole, Flex, 3/0 AWG Wire, 1/2" Stud Hole

Category: 1-Hole Copper Compression Lugs

3MÖ ScotchcastÖ 72 N Series Inline Splice Kit is a 1 kV rated, rigid body splice designed to join signal and control cables. It fits shielded or unshielded constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of shielded or unshielded cables, underground systems, joining of cable reel ends, direct burial applications, repair of cable failures and dig ins.

Category: Insulating & Sealing Compound

Lay-In Lug, Cooper, 14 AWG to 4 AWG, #10 Hole, Dual Rated for Copper and Aluminum Conductors, Direct Burial Rated, Tin - Electroplated

Category: Copper Lay-In Lugs

Terminal Strip With Short Circuit Bar, 6-Pole, 30 Amp, 600 Volt AC/DC, Wire Range: 10 - 16 AWG, Designed For Current Transformer Application

Category: Terminal Strips

Compression Lug with Sight Hole, 6 AWG, 1-Hole Stud, Stud Diameter 1/4 Inch, Color Code Blue, Die Code 24, Copper With Tin Plating

Category: 1-Hole Copper Compression Lugs

Compression Buttsplice, Copper, Tin Plated, 8 AWG, Standard Barrel, 1 Inch Splice Length, Temperature Rating: 90 Deg C, Voltage Rating: 600 Volts to 35 kV, Color Code Red

Category: Standard Barrel Copper Compression Sleeves

Butt Splice, Vinyl Insulated, 22 - 18 AWG, Red, Pack of 50

Category: Vinyl Insulated Butt Connectors

Split Bolt, Copper, Run: 1/0 to 350 MCM, Tap: 1/0 to 350 MCM, Rated Copper Conductors

Category: Copper Alloy Split Bolts

Power Distribution Block Cover, 3 Poles, Use W/ 163 Series Power Distribution Block, Thermoplastic, Clear

Category: Non-Insulated Connector Block Covers

Compression Lug, Copper, 1-Hole, Flex, #8 AWG Wire, 3/8 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Compression Lug, Straight, Long Barrel, 1-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 3/0 AWG, 1/2 Inch Bolt Hole, Coded Red, With No Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Long Barrel Copper Compression Lugs

Compression Lug, 1-Hole, Flex Conductor, 5 & 6 Aircraft, 1/4 Inch Stud Size, Copper

Category: 1-Hole Copper Compression Lugs

Bare Ground Clamp / Water Pipe, 14 AWG to 1/0 AWG, Pipe Size 1/2 to 1 Inch, High Strength Extruded Aluminum Alloy Body With Tin Plating, Slotted Screw Type, Dual Rated for CU/AL

Category: Bare Wire Ground Clamps