Search results

Easy-Splice Heavy Wall Heat Shrink 6-4/0 AWG, 48 Inch - 3 Count Made of specially formulated polyolefin irradiated and thermally stabilized to give the material "elastic memory". When a proper amount of heat is directly applied to the shrink sleeve, it will permanently shrink to its original unexpanded diameter tightly cover and "mold" itself into irregular shapes. The interior sleeve is coated with an adhesive that assures a watertight seal after shrinking. For use on standard poly- or elastomeric-insulated/ jacketed cables or lead-jacketed cables, which may include aluminum or steel armoring. RUS accepted for use as a secondary tap or splice cover. May be used for jacket repair on cables up to 35 kV. Qualified to ANSI C119.1-1986 for underground splicing. Insulate and seal buried electrical connections rated up to 1,000 volts. UL 486D Listed, CSA C22.2. Temperature Rating: 121-135 degrees C, 1,000V. CONNECTORS UP TO 6 INCHES: Recommended cut length = Connector length + 4 inches. CONNECTORS OVER 6 INCHES: Recommended cut length = Connector length + 5 inches.

Category: Heavy Wall Heat Shrink

NSIIPLDS-750-6

Category: Dual Sided Entry Wire Connector Blocks

22-18 AWG, # 8 Stud Vinyl Insulated Block Spade, 100 Per Pack

Category: Vinyl Insulated Block Fork Terminals

16-14 AWG Nylon Insulated Male Disc., 100/Pack

Category: Male Nylon Insulated Wire Disconnects

NSI HWHS6-40-9 6-4/0 AWG HEAV

Category: Heavy Wall Heat Shrink

2 Port Heavy Duty Dual Rated Transformer Lug 800 MCM - 300 MCM Heavy Duty Dual Rated Transformer Lugs are versatile and reusable set screw connectors made from high strength 6061-T6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

Category: Aluminum Panelboard Lugs

250 MCM - 1/0 AWG Parallel "T" Tap Connector With Cover Excellent for tapping off main conductor without cutting due to lay-in feature. Perpendicular tap allows for parallel or "T" tap configuration. Flexible cover allows for either parallel or "T" tap wire entry. Secure snap cover eliminates need for taping. Electro-tin plated for low contact resistance. Rated 600V. Temperature rating 90 degrees C.

Category: Aluminum Tap Lugs

Vinyl Insulated Ring Terminal, 22-18 AWG, #10 Stud, 300 Volt, Red, 100 Piece Pro Pack

Category: Vinyl Insulated Ring Tongues

Vinyl Insulated Spade Terminal, 22-18 AWG, #8 Stud, 300 Volt, Red, 100 Piece Pro Pack

Category: Vinyl Insulated Block Fork Terminals

6 Awg Cu Compression Lug, 5/16" Bolt Size

Category: 1-Hole Copper Compression Lugs

Nylon Insulated Ring Terminal, 12-10 AWG, 5/16" Stud, 600 Volt, Yellow, 40 Per Pack

Category: Nylon Insulated Ring Tongues

16-14 AWG Vinyl Insulated Spade #8 Stud, 100 Per Pack

Category: Vinyl Insulated Standard Fork Terminals

#8 BARE SPADE #10 STUD

Category: Non-Insulated Standard Fork Terminals

NSI 2-350TP TURN PREVENT LUG

Category: 2-Conductor Aluminum Mechanical Lugs

Insulated Multi-Cable Connector Block for Fine Stranded Flexible Copper Conductors, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 10 AWG - 1 AWG, Abrasion and Chemical Resistant. Rated for use with Copper Conductors.

Category: Single Sided Entry Wire Connector Blocks

NSI IT-750C 750-250 MCM POLAR

Category: Dual Sided Entry Wire Connector Blocks

NEMA PANEL LUG (4)800-300

Category: Aluminum Panelboard Lugs

Vinyl Insulated Spade Terminal, #10 Stud, 22-18 AWG, 100 Pc. Pro Pack

Category: Vinyl Insulated Block Fork Terminals

8 AWG Nylon Insulated Ring #10 Stud, 25 Per Pack

Category: Nylon Insulated Ring Tongues

Service Post Connector - One Wire Type 2 SOL Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Category: 2-Wire Service Post Connectors

10 Sol - 2/0 Str 360 Degree Swing Type 1/2 Inch Hub for Ground Clamps Threaded hub cast of high-strength, highly conductive bronze. Used with ground clamp with serrated hub to ground conductor to water pipe. Allows entry from any direction. Zinc plated steel screws.

Category: Ground Clamps With Hub

750 MCM Parallel "T" Tap Connector Excellent for tapping off main conductor without cutting due to lay-in feature. Perpendicular tap allows for parallel or "T" tap configuration. Electro-tin plated for low contact resistance. Rated 600V. Temperature rating 90 degrees C.

Category: Aluminum Tap Lugs

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 10, Wire Range: 750 MCM - 1/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Vinyl Insulated Butt Splice, 12-10 AWG, 300 Volt, Yellow, 30 Piece Pro Pack

Category: Vinyl Insulated Butt Connectors