Search results

.125/ .062 Easy-Splice Thin Wall Tubing 6" - Pack of 15 Flexible flame-retardant, thin wall, general purpose heat shrinkable polyolefin tubing has a 2:1 shrink ratio. Used for electrical insulation, wire harness bundling, wire jacket marking and color coding, it also splices and makes functional terminations. Available in black, white, red, green, blue and clear. Standard packaging is either 6" lengths in blister boxes or in economical 25' spools. UL recognized to Standard 224. Black, white and colored thin wall tubing meet MIL-DTL-23053/5, Class 1. Clear meets MIL-DTL-23053/5, Class 2 and is not flame retardant. Rated 600 Volts, 125 C.

Category: Thin Wall Heat Shrink

12-10 AWG Vinyl Insulated Ring Terminal 3/8" Stud Vinyl ring terminals are basic tongue ring terminals. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. Vinyl insulated ring terminals are made of tin-plated copper with brazed seam, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 10 Count WIRE SIZE: 12-10 AWG STUD SIZE: 3/8 " LENGTH: 1.326 WIDTH: 0.59 BRAND EQUIVALENT: Morris Products 01070 Ilsco 44224-B10 Panduit PV1038RL Penn Union R4C38

Category: Vinyl Insulated Ring Tongues

22-18 AWG Vinyl Insulated Ring #10 Stud, 100 Per Pack

Category: Vinyl Insulated Ring Tongues

10 Wire Polaris 600 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

NSI HWHS8-2-12 8-2 AWG HEAVY

Category: Heavy Wall Heat Shrink

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 8, Wire Range: 350 MCM - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

insulation Piercing Connector 500-2/0 Main, 4/0-4 Tap

Category: Splices - Insulation Piercing

Flexible Sleeve, .291 ID, 4 AWG, Tin Plated Copper, 50 Per Pack

Category: Non-Insulated Ferrules

Nsipts30

Category: Copper Pigtail Adapters

Thin Wall Heat Shrink Kit Assortment: 25Pc - 125 x 6", 25Pc - 187 x 6", 20Pc - 250 x 6", 12Pc - 375 x 6", 7Pc - 500 x 6", 5Pc - 750 x 6", 600V

Category: Heat Shrink Kits

Tap Connector, Main Conductor Range: 1 Solid - 2/0 AWG Stranded, Tap Conductor Range: 2/0 AWG Stranded - 6 Solid, 1-Conductor. For use with Copper-to-Copper Connections.

Category: 2-Bolt Bronze Tap Connectors

22-18 AWG Bare Butt Splice, 100 Per Pack

Category: Non-Insulated Butt Connectors

Heavy Duty Copper C Tap Grounding Connector for 4/0 to 1 AWG APPLICATIONS: Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

12-10 AWG Nylon Insulated Flag, 50/Pack

Category: Wire Disconnect Adapters

Nsi 800l2 800-300 Mcm mounting Hole 1 3/4 Center To Center

Category: 1-Conductor Aluminum Mechanical Lugs

Vinyl Insulated Ring Terminal, 22-18 AWG, #8 Stud, 300 Volt, Red, 100 Per Pack

Category: Vinyl Insulated Ring Tongues

18-10 AWG copper crimp sleeve wire connectors are strong wire connectors that are especially suited for branch circuitry as well as applications that are subject to vibration.500 Count

Category: Copper Crimp Connectors

Copper Compression Lug, Conductor Size: 1/0 AWG, 2-Hole Stud, Long Barrel, Stud Diameter: 1/4".

Category: 2-Hole Long Barrel Copper Compression Lugs

Nsi Gp-2 2-12 Str parallel Ot T Tap Connector

Category: Aluminum Tap Lugs

Copper Compression Lug, Conductor Size: 1/0 AWG, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs

Polaris™ Insulated Multi-Tap Connector, 3 Port (Dual Sided Entry and Mountable), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Standard Duty Silicon Bronze Ground Rod Clamp for 3/4 Inch Rod Standard Duty Ground Rod Clamps are made from silicon bronze with 304 stainless steel screws for maximum strength. cULus Listed 467 Grounding and Bonding.

Category: Ground Rod Ground Clamps

NSI CT-110 COPPER C TAP 3/0-1

Category: C-Tap Press-On Lugs