Conduit, Duct, & Raceway

Panduct® type F narrow slot wiring duct, 1.5 W x 1.5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. Bracket halves slide into position and clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded ro

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod

Category: Cable Tray Mounting Hardware

3 Inch Liquidtight Flexible Metal Conduit (LFMC), Type HCX - Extreme (High/Low) Temperature, -76°F to +302°F (-60°C to +150°C), Zero Halogen, Black, 25 Foot Coil, Galvanized Steel Core, Thermoplastic Rubber (TPE) Jacket, UV Resistant, Extra Corrosion Resistant, Oil Resistant

Category: Liquidtight Flexible Metallic Conduit

2 Inch PVC 45 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 45° Elbows

ECONO TROUGH TYPE 3R

Category: NEMA 12 Wire Trough

LEVITON S2HEL-9DC HORIZONTAL 90 W/COVER

Category: 2-Piece Non-Metallic Raceway Elbows

Cross, 4.00x4.00, SS Type 304

Category: Wireway Elbow-Tee-Cross Fittings

Closes off open end of S4000 Base. Use where one end feed is required in an undivided installation. Includes one 1/2" - 3/4" trade size KO and two No. 10-32 ground terminals.

Category: Large 2-Piece Metallic Raceway End Fittings

Wiremold V700 Series Raceway Grab n Go Kits eliminate the hassle of ordering and locating the accessories and fittings needed for quick raceway installations. Each Grab n Go Kit includes an assortment of the standard raceway fittings, fasteners and accessories needed to complete a typical installation. Fittings are separated by part number into individual compartments in a convenient reclosable container that fits most service truck systems.

Category: 1-Piece Metallic Raceway Kits

1 INCH PLENUM-GARD ORG W/TAPE

Category: Indoor Rated Innerduct

Low Voltage, Drop Ceiling/Entrance End Fitting / LD5 Raceway, Non-Metallic, White

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

All Threaded Rod, Zinc-Plated, 1/4-20 Thread x 6 Foot Length

Category: Threaded Rod

W-mold Al2415 Tee

Category: Small 2-Piece Metallic Raceway Tee Fittings

The PN03, PN05, and PN10 Series is a family of single compartment raceways for communication or power applications. Ideal for use in classrooms, offices, and hotel applications, or anywhere a small, low profile raceway is needed. Eclipse PN03, PN05, and PN10 Raceways are specifically designed for the workstation. They accept Ortronics Series II and TracJack outlets, Pass & Seymour Activate Series inserts, and Wiremold Open System device modules.

Category: 1-Piece Non-Metallic Raceway

90 degree tee connection of two runs of AL3300 Series Raceway. Three AL3300 Couplings included.

Category: Plugmold Tee Fittings

ASSY N1 WW 12X12 96 PNTD

Category: Screw Cover Wireway

ASSY N1 WW 8X8 96 PNTD

Category: Screw Cover Wireway

For installing a duplex style device and one modular furniture adapter for communications.

Category: Large 2-Piece Metallic Raceway Cover Plates

2000 Raceway Base & Cover Black û Base û 2000B .040" (1.0mm) steel. Cover û 2000C .025" (.6mm) steel. Supplied with two (2) 2010B Blank End Fittings and (1) 2001 Base Coupling. *Ordered in 5 ft internals. order 5 to get 1 base and cover*

Category: Non-Metallic Overfloor Raceway

5/8-11 X 10' Threaded Rod 10 Foot Lengths, Steel

Category: Threaded Rod

Wireway 90° Sweep Elbow, NEMA Type 1, Lay-In, Outside Opening, Steel, Galvanized, Size: 6" x 6"

Category: Wireway Elbows

EconoTrough, NEMA Type 3R, Raintight Wireway, Material: Galvanized Steel, Dimensions: 10" x 10" x 72"

Category: NEMA 3R Wire Trough

6 Inch PVC 90 Degree Sweep Elbow, 48 Inch Radius, Schedule 80, Gray

Category: 90° PVC Sweeps