Conduit, Duct, & Raceway

Channel Cable Tray Straight Section, Ventilated, 3 Inch Wide, 4 Feet Long, Hot Dip Galvanized

Category: Straight Channel Cable Tray

CAD SES40PFP FLUSH PLATE SES4

Category: Metallic Raceway Connectors & Adapters

PST PS-520-2T3-10-PG PS 520 2

Category: Steel Back-To-Back Strut

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 18" (457mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 18" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB18BL bra

Category: Mounting Hardware & Brackets

Used to support the 6x4 and 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 9" (229mm) allowing runs to be leveled over uneven cabinet heights. Bracket is secured to the cabinet frame with through bolts (not included). The

Category: Mounting Hardware & Brackets

Screw-Cover Wiring Trough Type 1 used for indoor applications protecting against dirt or moist. This Wiring Trough NEMA Type 1, A1212120T1T item measures 12.00x12.00x120.00 inches with a material of Steel colored Gray.

Category: NEMA 1 Wire Trough

Slotted Wall Wiring Duct, 2" x 3", Adhesive, PVC, White, 120ft /Carton

Category: Standard Density Wire Duct

1-1/2 Inch Liquidtight Steel Flex, Type EF - Extra Flexible, PVC Jacket, Gray, 150 Foot Reel, General Construction Grade, No Bonding Wire

Category: Liquidtight Flexible Metallic Conduit

Layin Hinged-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. This Straight Section Lay-in Hinged-Cover Type 1 no KOs, F22G72 item measures 2.5x2.5x72in with material of Steel colored Gray.

Category: NEMA 1 Wire Trough

1-1/4 Inch Liquidtight Steel Flex, UL Listed, Type LA, Steel Core, PVC Jacket, Gray, 50 Foot Coil, Integral Bonding Strip

Category: Liquidtight Flexible Metallic Conduit

For mounting two AMP NETCONNECT SL Series devices. Black

Category: Keystone Modules For Metallic Raceway

W-mold Nm20ig412 4' Ig crt 12" Oc Plugmold

Category: Single Circuit Non-Metallic Plugmold

SINGLE GANG EXTRON AAP FACE PLATE

Category: 2-Gang Raceway Device Brackets & Plates

For installing Wiremold CM2 Series inserts and Activate connectivity inserts. Provides flush installation. Includes 6A CM-MAB adapter.

Category: Metallic Raceway Connectors & Adapters

Closes off open end of S4000 Base. Use where one end feed is required in an undivided installation. Includes one 1/2" - 3/4" trade size KO and two No. 10-32 ground terminals.

Category: Large 2-Piece Metallic Raceway End Fittings

5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

WMD NM20GB12 NM PLGMD W/SNPCL

Category: Single Circuit Non-Metallic Plugmold

For right angle turns around external corners.

Category: 2-Piece Non-Metallic Raceway Elbows

WIREMOLD AL5256ACT2LP

Category: 2-Gang Raceway Device Brackets & Plates

WMD PN10F19FW NM RADIUS FIBER

Category: 1-Piece Non-Metallic Raceway Elbows

WMD AL5256-ACTMAB PHONE COVER

Category: Large 2-Piece Metallic Raceway Cover Plates

Makes a 90 degree external turn in a raceway run. Includes two pair of AL5201 Couplings.

Category: Large 2-Piece Metallic Raceway Elbows

Add power receptacles or devices to existing modular Tele-Power Poles. Includes receptacle mounting bracket. Anodized Aluminum. 1" x 2 1/4" x 28" (25mm x 57mm x 711mm)

Category: Power Pole Covers

For adapting PN03 or PN05 Series Raceway to a PN10 trunking through the PN10F15 Tee Fitting.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters