Conduit, Duct, & Raceway

For covering joint where two pieces of 5400TC Cover come together. White

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Slotted Wall Wiring Duct, 1" x 1.5", Non-Adhesive, PVC, Gray, 120ft/Carton

Category: Standard Density Wire Duct

90 degree flat corner, with integral dividers, that provides a 2" (51mm) cable bend radius for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

FiberReady divided fitting to feed 5400 Series Raceway. Includes 1", 1 1/4", 1 1/2", and 2" trade size KOs on back and top. White

Category: 2-Piece Non-Metallic Raceway End Fittings

Panduct® type G wide slot wiring duct, .5 W x .5 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Cable Tray, Ladder Type, Aluminum, 9 Inch Rung Spacing, 24 Inch Wide, 12 Foot Long

Category: Straight Cable Ladder Tray

Non-Metallic, Modular Furniture Adapter, 5500 Series. Size: 4-1/4" Length, 1-7/8" Width. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

PN5 Series Drop Ceiling Connector for dropping cables from ceiling into the raceway. Has 1/2" and 3/4" concentric trade size KOs. Includes PN153R Reducer Adapter for use with PN03 Series Raceway. Finish - Ivory

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

2A opening. Includes adapters for Ortronics TracJack, Series II, Wiremold CM2 Series inserts, Pass and Seymour Activate and other manufacturers.

Category: Large 2-Piece Metallic Raceway Cover Plates

Two-Compartment Pole, Nominal Material Thickness: 0.04" (1.0mm), Gray or Ivory Boot Base, Furnished, Unwired without Outlets, Mounting Hardware, Entrance End Plate and Ceiling Trim Plates Furnished, Length: 10' 4"

Category: Steel Power Poles

For transitioning from 2900 Series Raceway to 2700 Series Raceway. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

For mounting one or two keystone device modules, recessed to provide a flush installation. Has one opening and one KO. Fog White

Category: 1-Gang Raceway Box Covers & Faceplates

PanelMaxäó corner wiring duct, 3.35W x 2.57 H, .2 (5.0mm) slot width, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

For in-line mounting of commercially available duplex receptacle.

Category: Large 2-Piece Metallic Raceway Cover Plates

End fitting with plastic 1/2" trade size KO.

Category: Small 2-Piece Metallic Raceway End Fittings

Deep Strut - 9/16" x 1-1/8" Elongated Holes - 2" Centers, Steel, Green, Size: 1-5/8" Wide, 1-5/8" High, 10' Long, 14 Gauge

Category: Steel Strut with Elongated Holes

Lay-in Galvanized 90-Degree Sweep Elbows are used for large-radius turns. This 90-Degree Sweep Elbow Lay-in, F121290SEGV item measures 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbows

3 Inch PVC 45 Degree Sweep Elbow, 30 Inch Radius, Schedule 40, Gray

Category: 45° PVC Sweeps

High Density Slotted Wall Wiring Duct, 1" x 4", Non-Adhesive, PVC, White

Category: High Density Wire Duct

Screw-Cover Wiring Trough Type 1 used for indoor applications protecting against dirt or moist. This Wiring Trough NEMA Type 1, A6660T1T item measures 6.00x6.00x60.00 inches with a material of Steel colored Gray.

Category: NEMA 1 Wire Trough

Heavy Duty Cover Clamp for 5" NEMA, 6" Height, 24 Tray Width, Aluminum, with Stainless Steel Hardware

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

4 Inch PVC 90 Degree Sweep Elbow, 36 Inch Radius, Schedule 40, Gray

Category: 90° PVC Sweeps

Narrow Slot Wiring Duct, Lead-Free PVC, Blue, Size: 3 Inch Wide, 4 Inch Deep, 6 Foot Long, .20" Slot Width, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Non-Metallic, Latching Raceway, 2800 Series. Size: 6' Length, 1" Width, 1/2" Height. PVC, Fog White. Sold by foot in increments of 6.

Category: 1-Piece Non-Metallic Raceway