Conduit, Duct, & Raceway

AL2400 Series grounding conductor to provide an additional ground to raceway.

Category: Small 2-Piece Metallic Raceway Grounding Clamps

Non-Metallic External Elbow Fitting, 5500 Series, White. 90° External Corner with Integral Dividers That Provide a 2" (51mm) Cable Bend Radius for UTP and Fiber Optic Installations.

Category: 2-Piece Non-Metallic Raceway Elbows

Non-Metallic, Cover Clip, 40N2 Series, Size: 5/8" Length. PVC, Ivory. For Use with 40N2B08 Raceway Base.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

WIREMOLD 6' PLUGMOLD 24" ON CENTER PKG OF 2(2=1) IVORY

Category: Single Circuit Steel Plugmold

WMD S4000C315 31.5IN. BLANK C

Category: Large 2-Piece Metallic Raceway Covers

For installation of two duplex style receptacles and four RJ11/45 type modular connectors. Complete with necessary bridges.

Category: Large 2-Piece Metallic Raceway Cover Plates

WMD 24S7224IGX99IV PLGMD 20A

Category: Single Circuit Steel Plugmold

Four-Gang Cover, Two Tracjack Mini Adapters, 4000 Series Raceway, Gray

Category: 4-Gang Raceway Box Covers

Blanks entire low-voltage recess in device plate. For use with 5007C-1AXX only. Black

Category: 2-Piece Non-Metallic Raceway End Fittings

Three-gang blank device plate in sectional (SB) widths.

Category: 3-Gang Raceway Device Brackets & Plates

Available in standard (KO) widths.

Category: 1-Gang Raceway Device Brackets & Plates

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

Surface mount box for use with Eclipse Raceway or standalone application. Has two 1/2" trade size KOs. Accepts four front-loaded downward facing Ortronics TracJack inserts.

Category: 2-Gang Raceway Device Boxes

Steel, Entrance End Fitting, V2400 Series. Size: 2-11/16" Length, 1-7/8" Width, 2-1/8" Height. Includes: 1/2", 3/4" Trade Size KOs, 1/2" Trade Size KO. Black.

Category: Small 2-Piece Metallic Raceway End Fittings

WMD NM20GB530 PLGMD SGL CRCT

Category: Single Circuit Non-Metallic Plugmold

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

Accepts two Extron Electronics AAP single space modules.

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, Flexible Corduct. 1200 Series. Size: 50' Length, 2-1/2" Width, 14/32" Height. Color: Beige.

Category: Non-Metallic Overfloor Raceway

Non-Metallic, 2A, SVGA Module. Size: 0.57" x 0.76". Gray.

Category: Keystone Modules For Metallic Raceway

Sectional device plate, provided with double opening to accept two microphone devices.

Category: 1-Gang Raceway Device Brackets & Plates

5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

W-mold G20-c2 Cord-ended Plug mold

Category: Single Circuit Steel Plugmold

6' Plugmold Multioutlet System with 6 single outlets. 304 Stainless Steel

Category: Single Circuit Steel Plugmold

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Beige

Category: Non-Metallic Overfloor Raceway