Conduit, Duct, & Raceway

CAR A9D2S1JNNB1000 1-1/2" 1000 FT

Category: HDPE Innerduct

Splitter Trough, Type 1 splits feeder circuit conductors into multiple branch circuit conductors. This Splitter Trough Type 1 4-wire 225 amps, AST6224R item measures 72x8x5 inches with a material of Steel colored Gray.

Category: NEMA 1 Wire Trough

1 WHITE DUCT COVER HALOGEN FREE

Category: Wire Duct Covers

Snap-on single gang 106 duplex electrical/communication faceplate. Used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame.

Category: Metallic Overfloor Raceway Device Plates

Panduct® flush cover type D round hole wiring duct, 2 W x 2 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 4 W x 4 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

End cap fitting for use with LD5 raceway, International Gray, ABS, Length 1.62 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Used to carry cables horizontally throughout the system. Use QuikLock Coupler FRBC24X4YL to attach channel and/or fittings.

Category: Straight Sections

Provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Kit includes 6' length of 2x2 FiberRunner® Hinged Channel H2X2BL6, 6' length of 2x2 snap-on hinged cover HC2BL6, four adjustabl

Category: Drop-Offs, Spillouts & Outlets

Provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Kit includes 6' length of 2x2 FiberRunner®Hinged Channel H2X2YL6, 6' length of 2x2 snap-on hinged cover HC2YL6, four adjustable

Category: Drop-Offs, Spillouts & Outlets

CTS CJ4X1-200S 2" PLENUM-GARD ORANGE SPLIT

Category: Corrugated Plenum Rated Innerduct

3 Inch PVC 90 Degree Sweep Elbow, 30 Inch Radius, Schedule 40, Gray

Category: 90° PVC Sweeps

2-1/2 Inch PVC 22-1/2 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 22-1/2° Elbows

3 Inch PVC 45 Degree Sweep Elbow, 24 Inch Radius, Schedule 40, Gray

Category: 45° PVC Sweeps

CTS CD4X1C-500 1/2" PLENUM GARD

Category: Corrugated Plenum Rated Innerduct

Drop ceiling/entrance end fitting for use with LD5 raceway, International Gray, ABS, Length 3.42 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

End cap fitting for use with LDPH3 and LDS3 raceway, Electric Ivory, ABS, Length 0.87 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Duct cover with protective film, .5 W x 6.' length, PVC, white - SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

CTS CE4X1C-1000 3/4" PLENUM GARD

Category: Corrugated Plenum Rated Innerduct

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with tw

Category: Mounting Hardware & Brackets

CAR CF4X1C100 1IN PLENUM GARD

Category: Indoor Rated Innerduct

Attaches any 4x4 FiberRunner® Fitting or Channel to the 4x4 Fiber-Duct™ Channel, S4X4YL6 or E4X4YL6. Includes solid cover.

Category: End Caps & Reducers

Fitting that transitions from ADC's 4x4 FiberGuide System to 4x4 FiberRunner® System. Fitting has a black finish and is made from metal. Attachment hardware is included.

Category: Couplers & Joiners

Panduct® type FS solid wall wiring duct, .5 W x 1 H, 6' length, PVC, light gray.

Category: 2-Piece Non-Metallic Raceway