Search results

Duct cover with protective film, 1.5 W x 6' length, PVC, intrinsic blue. SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Duct cover, 50mm W x 2M length, PVC, RAL 7030 grey.

Category: Wire Duct Covers

Deep Strut - No Holes, Height: 1-5/8", Width: 1-5/8", Material: Steel, Finish: -Pre-Galvanized, Gauge: 16, Length: 20 feet. Color: Silver.

Category: Steel Solid Strut

Panduct® type F narrow slot wiring duct, 2 W x 5 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Pre-assembled 6in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Orange, 20 pieces.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Snap-on single gang blank cover faceplate. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Wiring Duct Cover, for 1-1/2" Wide Ty-Duct, PVC, Gray, 6'Wiring Duct Cover 1-1/2" Wide Rigid PVC, Length: 6 ft, Color: Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Attaches to 24x4 channel and/or fittings to create a 90° horizontal branch with a 12x4 exit from straight horizontal run. Accepts optional split cover FRTCV24W12YL.

Category: 1-Piece Non-Metallic Raceway Elbows

Plugin plugmoldSteel, Plug-In Plugmold, Length: 3 ft. Color: Black. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets. Includes: (2) Mounting Clips.

Category: Single Circuit Steel Plugmold

6IN U CHANNEL COUPLING

Category: Wireway U-Connectors

Attaches to 6x4 channel and/or fittings to create a 45° downward angle from a horizontal run. Used with inside vertical 45° angle fitting FRIV456X4YL to change level of a straight horizontal run. Accepts optional split cover FROV45SC6OR.

Category: 1-Piece Non-Metallic Raceway Elbows

Attaches to 4x4 channel and/or fittings to create a 45° upward angle from a horizontal run. Used with outside vertical 45° angle fitting FROV454X4YL to change level of a straight horizontal run. Includes split cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Used to carry the cables vertically to the front or the sides of equipment racks throughout the system. Accepts hinged cover HC2OR6. Extra supports required when used in horizontal applications. Use QuikLockâ„¢ Coupler FBC2X2OR to attach channel and/or fitt, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Attaches to 12x4 channel and/or fittings to create a 90° vertical turn down from a straight horizontal run. Accepts optional split cover FROVRASC12YL.

Category: 1-Piece Non-Metallic Raceway Elbows

Attaches to 6x4 channel base and/or fittings to create a 90° horizontal turn from a straight horizontal run. Accepts optional split cover FRRAASC6YL.

Category: 1-Piece Non-Metallic Raceway Elbows

Optional split cover for the outside vertical right angle fitting FROVRA6X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

THB LTC050-85 85FT LENGTH OF

Category: Liquidtight Flexible Non-Metallic Conduit

One-piece latching surface raceway. Supplied with pre-applied adhesive backed tape.Available in 6', 8', and 10' lengths.

Category: 1-Piece Non-Metallic Raceway

Right angle fitting. Used to join sections of T-70 raceway at right angles, International Gray.

Category: 1-Piece Non-Metallic Raceway Elbows

The L-bracket with quick mount clip is used for installing the CWD4 corner wiring duct. It is made of low-carbon steel and spring steel and comes in a package of 16 pieces. The recommended fastener size is #10 – 32 x 1/2" (not

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Panduct® type G wide slot wiring duct, 2 W x 5 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Transition fitting. Used to transition to T-70 raceway, White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type G wide slot wiring duct, 1.5 W x 1.5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Single gang one-piece deep outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.23in L x 3.48in W x 2.75in H (133.0mm x 88.5mm x 69.8mm). Breakou

Category: 1-Gang Raceway Device Boxes