Search results

Panduct® type FS solid wall wiring duct, 3 W x 5 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Panduct® type G wide slot wiring duct, 4 W x 5 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1", and 1 1/4" which allows entry from ceiling or wall. International Gray.

Category: 1-Piece Non-Metallic Raceway End Fittings

Optional split cover for the four way cross fitting FRFWC6X4OR. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Attaches to 6x4 channel and/or fittings to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FROVRA6X4YL to change level of a straight horizontal run. Includes split cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Used to fully enclose 12x4 channel in conjunction with the Spill-Over Junction FRSPJ4X4BL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Straight Cable Tray Covers

Solid Divider Wall, Type NNC, Halogen Free, For 50mm High Duct

Category: Wall Duct Dividers

Type NC halogen-free wiring duct cover, 25mm W x 2M length, halogen-free, white.

Category: Wire Duct Covers

Attaches to 4x4 channel and/or fittings to create a 90° horizontal branch from straight horizontal runs. Accepts optional split cover FRTSC4OR.

Category: 1-Piece Non-Metallic Raceway Elbows

Type TNC replacement cover for slotted wall wiring duct, 49.6mm cover width, 6.6' length, polyphenylene ether + high impact polystyrene (PPE + HIPS), light gray.

Category: Special Purpose Wire Duct

Snap-on 2-position flush mount faceplate accepts any Panduit® NetKey® Module and most other manufacturers' keystone modules. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Attaches to 4x4 channel and/or fittings to create a horizontal four way cross intersection. Accepts optional split cover FRFWCSC4OR.

Category: 1-Piece Non-Metallic Raceway Elbows

Fire box adapter for use with LD5/LDPH5 profile raceway.NOTE: For low voltage applications only, International Gray, ABS, Length 2.00 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

W-mold G20ig306 Gry 3w1ckt Pl ugmold

Category: Single Circuit Steel Plugmold

Snap-on single gang rectangular communication faceplate. Used to cover one NEMA standard rectangular communication module frame. Module frame screw mounts directly to underside of snap-on faceplate. No mounting device needed. Supplied with two mounting sc

Category: 1-Gang Raceway Box Covers & Faceplates

The L-bracket with quick mount clip is used for installing the CWD3 corner wiring duct. It is made of low-carbon steel and spring steel and comes in a package of 16 pieces. The recommended fastener size is #10 – 32 x 1/2" (not included).

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Raceway Cover, T-70/TE-70/TG-70/Twin 70 Series, Off White, 10'

Category: 2-Piece Non-Metallic Raceway Covers

Used for closing off open ends of the hinged channel or fittings. No coupler required. Push-on installation, Orange.

Category: Wireway Closure Plates

The optional split cover for the reducer fitting FRRF126YL is yellow and made of ABS plastic. The snap-on feature allows the cover to be installed and removed with no tools required. It creates a radiused 3/4" (19mm) opening for easy access to add or remo

Category: 2-Piece Non-Metallic Raceway Covers

Single Gang 2-piece Power Source BoxSingle gang two-piece snap together power source box. For use with Pan-Way® LDPH3, 5, 10, or LDS3, or 5 profile raceway. 5.02"L x 3.32"W x 1.31"H (127.6mm x 83.0mm x 33.3mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Outside corner fitting - non-adjustable. Used to join sections of TG raceway at outside corners, Electric Ivory.

Category: 1-Piece Non-Metallic Raceway Elbows

Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from 6x4 channel, 6x4 horizontal tee fitting, or 6x4 exit on 12x4 vertical tee, Yellow.

Category: 1-Piece Non-Metallic Raceway Tee Fittings