Search results

3' GFCI Plugmold Multioutlet Tamper- Resistant System. Finish - Black

Category: Single Circuit Tamper Proof Plugmold

TG raceway divider wall. Snaps onto rails in TG raceway base to create separate channels. Must use wire retainers to ensure channel separation per UL/CSA.

Category: Wall Duct Dividers

Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (9) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

2 x 2 Vertical Tee, FiberRunner System, Yellow

Category: Wireway Cutoff Fittings

Strut with Elongated Holes, Steel, Pre-Galvanized, 12 Gauge, 1-5/8 In Wide, 13/16 In Deep, 10 Ft. Long, 9/16 In x 1-1/8 In Elongated Holes (2 In Centers)

Category: Steel Strut with Elongated Holes

Transition fitting. Used to transition to T-70 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Outside corner fitting – non-adjustable. PVC, White, Used to join sections of TG raceway at inside corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Inside Corner Fitting / TG-70 Raceway, Non-Metallic, Off-White

Category: 2-Piece Non-Metallic Raceway Elbows

Single gang two-piece screw together intermediate outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12"L x 3.38"W x 2.27"H (130.2mm x 86.0mm x 57.7mm). Breakouts fo

Category: 1-Gang Raceway Device Boxes

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" d

Category: 1-Gang Raceway Device Boxes

Panduct® flush cover type D round hole wiring duct, 1 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° horizontal turn from a straight horizontal run. Cover included. Orange.

Category: Wireway U-Connectors

Panduct® type H hinged cover wide slot wiring duct, 3 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Optional split cover for the outside vertical 45° angle fitting FROV456X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

The fitting attaches any 12x4 FiberRunner® Fitting or Channel to any 6x4 FiberRunner® Fitting or Channel while transitioning to the right. It is black and made of ABS plastic. It accepts split cover FRRF126RSCBL.

Category: 1-Piece Non-Metallic Raceway Elbows

T-45 reducer fitting to LD10 raceway, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Optional split cover for the horizontal 45° angle fitting FRH456X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Panduct® type G wide slot wiring duct, 0.69" W x 4.10" H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

24 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Black.

Category: 1-Piece Non-Metallic Raceway End Fittings

Panduct® type F narrow slot wiring duct, 3 W x 1 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Used to carry the cables vertically to the front or the sides of equipment racks throughout the system. Accepts cover C4OR6. Extra supports required when used in horizontal applications. Cover sold separately, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wiring Duct Cover, PANDUCT, 25mm W x 2m Long, PVC, White

Category: Wire Duct Covers

Duct cover, 75mm W x 2M length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Fast-Snap™ Single Gang Two-Piece Snap Together Outlet Box with adhesive backing. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or

Category: 1-Gang Raceway Device Boxes