Search results

Lay-in Galvanized 90-Deg Crosses used when four branches of wireway route cables in four directions. This Cross Fitting, F66XGV item fits 6.00x6.00 inches with a material of Steel finish Galvanized.

Category: Straight Wire Basket

Ladder Rack, Outside Bend, Material: Steel, Width: 6 Inch

Category: 90° Vertical Outside Tray Bend

Wireway, Closure Plate, Bulletin F25 (fiberglass Type 12 & 3r Wireway And Trough), Size/dims: 6.00x6.00, Material/finish: Steel/epoxy

Category: Wireway Closure Plates

Fiberglass Wiring Trough, NEMA Type 12 and 3R, Number of Openings: 5, Number of Cover Screws: 12, Material: Steel, Dimensions: 4" x 4" x 60"

Category: NEMA 12 Wire Trough

CleanTray Straight section splices for connecting two fittings with tabs in frequent washdown areas. This Straight Section Splice Sloped Top Perforated CT, CTS44PSPSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

Ladder Rack Curved Section, Outside Bend, Material: Steel, Width: 12"

Category: 90° Vertical Outside Tray Bend

Variable-Angle Elbow Fitting used for turns that can be adjusted from 0 to 90-deg washdown areas. This Variable-Angle Elbow Fitting CleanTray, CT66VSS item measures 6.00x6.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

CleanTray 45-Degree Elbow Inside Cover Sloped used for 45-degree turns in washdown applications. This 45-Degree Elbow Inside Cover Slope CleanTray, CTS44EIC45SS item measures 4.00x4.00 inch with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

CleanTray Telescopic Straight Section used for adjusting wireway length in frequent washdown areas. This Telescopic Straight Section CleanTray, CT22TSS item measures 2.00x2.00 inches with a material of SS304 finish Brushed.

Category: Straight Wire Basket

Splitter Trough, NEMA Type 1, Number of Wires: 4, Main Lugs Amps CU: 85, Main Lugs Wire Size Range: 14-1, Main Lugs Qty: 1, Branch Lugs Amps CU: 55, Branch Lugs Wire Size Range: 14-6, Branch Lugs Qty: 6, Material: Steel, Dimensions: 24" x 6" x 4.5"

Category: NEMA 1 Wire Trough

Ladder Rack, Outside Bend, Material: Steel, Width: 6"

Category: 90° Vertical Outside Tray Bend

EconoTrough protects wire and cable junctions and terminations exposed to wet conditions. This EconoTrough NEMA Type 3R, F1010116RTGV item measures 10.00x10.00x116.00 inches with a material of Steel finish Galvanized.

Category: NEMA 3R Wire Trough

Ladder Rack Straight Sections (cULus Classified) support cable on straight runs. This Ladder Rack Straight Sections (cULus Classified), LSS6GZ item 6.00 wide with a material of Steel finish Galvanized.

Category: Straight Cable Ladder Tray

Splitter Trough Type 1 4-wire 225 amps, 72x8x5, Gray, Steel

Category: NEMA 1 Wire Trough

Wire Trough, Type 1, Bulletin F40t1 (type 1 Wiring Trough), Size/dims: 8.00x8.00x96.00, Material/finish: Steel/gray

Category: NEMA 1 Wire Trough

Galvanized Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F22GAGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Tee Fittings

Wire Trough, NEMA Type 1, Material: Steel, Dimensions: 4" x 4" x 96"

Category: NEMA 1 Wire Trough

Layin Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. This Straight Section Layin Flat Cover Type 1 KOs, F44T1120GVWK item measures 4x4x120in with material of Steel finish Galvanized.

Category: Hinged Cover Wireway

WALL ANGLE SPT. KIT 6IN- CLEAR

Category: Cable Tray Mounting Hardware

Cable Runway Elevation Kit elevates ladder rack above rack-to-ladder mounting plate. This Runway Elevation Kit 6.00 Elevation, LEK6 item finish Plated with a material of Steel.

Category: Cable Tray - Elevation Kits

Fiberglass Feed-Through NEMA Type 12 and 3R Wireway Straight Section, 4" x 4" x 36"

Category: Screw Cover Wireway

Straight Section Splice, Used to Divide a Straight Section Splice Into Two Sections, Dimensions: 5.13" x 6"

Category: Cable Tray Dividers

Galvanized Panel Adapter, 4.00x4.00, Steel

Category: Wireway Panel Adapters

45-Degree Wireway Elbow, Top Cover Sloped Inward, Dimensions: 4" x 6" x 6.79"

Category: Cable Tray Dividers