Search results

Ladder Rack, Center Support Kit, Bulletin Dcr (ladder Tray), Size/dims: Fits 18.00, Material/finish: Steel/zinc

Category: Cable Tray - Runway to Ceiling Kits

Straight Section, Type 1, Size/Dims: 8" x 8" x 120", Material/Finish: Steel/Galvanized

Category: Screw Cover Wireway

Galvanized 90-Degree Sweep Elbow, 2.50x2.50, Steel

Category: Wireway Elbow-Tee-Cross Fittings

Wiring Trough, NEMA Type 1 Screw-Cover Wireway, Straight Section, Size: 1' Width, 1' Depth, 2' Length, 14 Gauge Steel, No Knockouts.

Category: NEMA 1 Wire Trough

Ladder Rack, Outside Bend, Material: Steel, Width: 6 Inch

Category: 90° Vertical Outside Tray Bend

Lay-in Galvanized 90-Deg Crosses used when four branches of wireway route cables in four directions. This Cross Fitting, F66XGV item fits 6.00x6.00 inches with a material of Steel finish Galvanized.

Category: Straight Wire Basket

Wireway, Closure Plate, Bulletin F25 (fiberglass Type 12 & 3r Wireway And Trough), Size/dims: 6.00x6.00, Material/finish: Steel/epoxy

Category: Wireway Closure Plates

Wireway Elbow, 45 Degree, Bulletin F25 (Fiberglass Type 12 & 3r Wireway And Trough), Size/Dims: 6" x 6", Material/Finish: Fiberglass

Category: Wireway Elbows

Ladder Rack, Curved, Inside Bend, Material: Steel, Width: 12"

Category: 90° Vertical Inside Cable Tray Bend

Cable Runway L-Bracket Kit supports cables that need to be separated from the main cable run. This L-Bracket Kit, LLBW item colored White with a material of Steel.

Category: Cable Tray Mounting Hardware

Wireway Sweeping Tee Fitting, Size/dims: 6.00x6.00, Material/Finish: Steel/Galvanized. For use with Lay-in Type 12 Wireway .

Category: Wireway Tee Fittings

Fiberglass Wiring Trough, NEMA Type 12 and 3R, Number of Openings: 5, Number of Cover Screws: 12, Material: Steel, Dimensions: 4" x 4" x 60"

Category: NEMA 12 Wire Trough

Ladder Rack Curved Section, Outside Bend, Material: Steel, Width: 12"

Category: 90° Vertical Outside Tray Bend

Wireway Reducer, Material: Stainless Steel, Dimensions: 3" x 3" - 2" x 2"

Category: Wireway Reducers

Ladder Rack, Outside Bend, Material: Steel, Width: 18"

Category: 90° Vertical Outside Tray Bend

CleanTray Straight section splices for connecting two fittings with tabs in frequent washdown areas. This Straight Section Splice CleanTray, CT44SPSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

Splitter Trough, NEMA Type 1, Number of Wires: 4, Main Lugs Amps CU: 85, Main Lugs Wire Size Range: 14-1, Main Lugs Qty: 1, Branch Lugs Amps CU: 55, Branch Lugs Wire Size Range: 14-6, Branch Lugs Qty: 6, Material: Steel, Dimensions: 24" x 6" x 4.5"

Category: NEMA 1 Wire Trough

Divider used to divide CleanTray Straight Section Splice to two sections in washdown applications. This Divider Straight Section Splice CleanTray, CT44DSPSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Barrier Kits

Wireway Reducer, Right Sloped, Material: Stianless Steel, Dimensions: 6" x 6" - 4" x 4"

Category: Wireway Reducers

Wire Trough, Screw Cover, Bulletin F20sc (type 12 Screw Cover Trough), Size/dims: 4.00x4.00x24.00, Material/finish: Steel/gray

Category: NEMA 12 Wire Trough

Layin Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. This Straight Section Layin Flat Cover Type 1 KOs, F66T1120GVWK item measures 6x6x120in with material of Steel finish Galvanized.

Category: Screw Cover Wireway

Closure Plate, Material: Stainless Steel, Dimensions: 4" x 6"

Category: Wireway Closure Plates

Closure Plate 4" x 4" Right Sloped

Category: Wireway Closure Plates

CleanTray Straight section splices for connecting two fittings with tabs in frequent washdown areas. This Straight Section Splice Sloped Top Perforated CT, CTS44PSPSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Dividers