Search results

Non-Metallic, Latching Raceway, 2800 Series. Size: 6' Length, 1" Width, 1/2" Height. PVC, Fog White. Sold by foot in increments of 6.

Category: 1-Piece Non-Metallic Raceway

WMD S4000C315 31.5IN. BLANK C

Category: Large 2-Piece Metallic Raceway Covers

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

Non-Metallic, 2A, SVGA Module. Size: 0.57" x 0.76". Gray.

Category: Keystone Modules For Metallic Raceway

2A opening. Includes adapters for Ortronics TracJack, Series II, Wiremold CM2 Series inserts, Pass and Seymour Activate and other manufacturers.

Category: Large 2-Piece Metallic Raceway Cover Plates

90 degree internal corner, with integral dividers, that provides a 2" (51mm) cable bend radius for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

Steel, Plugmold Multioutlet Strip, 2400PM Series, Single-Channel, 5 Duplex Receptacle, Size: 5' Length, GBA Finish, Color: Ivory.

Category: Dual Circuit Steel Plugmold

Wmd Alds4011 Alds4000 Flat El

Category: Large 2-Piece Metallic Raceway Elbows

WMD PN10F17FW NM INTERNAL ELB

Category: 1-Piece Non-Metallic Raceway Elbows

5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

For installation of two duplex style receptacles and four RJ11/45 type modular connectors. Complete with necessary bridges.

Category: Large 2-Piece Metallic Raceway Cover Plates

Non-Metallic External Elbow Fitting, 5500 Series, White. 90° External Corner with Integral Dividers That Provide a 2" (51mm) Cable Bend Radius for UTP and Fiber Optic Installations.

Category: 2-Piece Non-Metallic Raceway Elbows

Steel, Entrance End Fitting, V2400 Series. Size: 2-11/16" Length, 1-7/8" Width, 2-1/8" Height. Includes: 1/2", 3/4" Trade Size KOs, 1/2" Trade Size KO. Black.

Category: Small 2-Piece Metallic Raceway End Fittings

WMD 5507AAP-FW 5507 PLATE WIT

Category: 1-Gang Raceway Box Covers & Faceplates

WMD 24S7224IGX99IV PLGMD 20A

Category: Single Circuit Steel Plugmold

90 degree flat corner, with integral dividers, that provides a 2" (51mm) cable bend radius for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Beige

Category: Non-Metallic Overfloor Raceway

W-mold Al2411 90d Flat Elbow

Category: Small 2-Piece Metallic Raceway Elbows

For installation of one rectangular receptacle. Complete with necessary bridges.

Category: Large 2-Piece Metallic Raceway Cover Plates

WIREMOLD 6' PLUGMOLD 24" ON CENTER PKG OF 2(2=1) IVORY

Category: Single Circuit Steel Plugmold

Three-gang blank device plate in sectional (SB) widths.

Category: 3-Gang Raceway Device Brackets & Plates

Available in standard (KO) widths.

Category: 1-Gang Raceway Device Brackets & Plates

Steel, 1-Gang, Single Receptacle Cover, 5500 Series. Size: 1.59" Diameter. Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

For right angle turns on same surface. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. White

Category: 1-Piece Non-Metallic Raceway Elbows