Search results

Ten (5 duplex) outlets, nonmetallic housing with ivory finish. 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 12" (305mm).

Category: Single Circuit Non-Metallic Plugmold

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 3/4" cable diameter. Beige

Category: Non-Metallic Overfloor Raceway

Non-Metallic, Flexible Corduct. 1600 Series. Size: 5' Length, 3-11/32" Width, 30/32" Height. Color: Brown.

Category: Non-Metallic Overfloor Raceway

Wmd Rfb119-spacer

Category: 1-Gang Raceway Device Brackets & Plates

Connects end of 3000 Series Raceway to 1 1/2" trade size conduit or armored cable.

Category: Metallic Raceway Connectors & Adapters

For covering unused compartments in the device bracket. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

Use as blank cover or tap off KO in center of plate for 1/2" trade size conduit. G3007C Device Bracket included. Ivory

Category: Small 2-Piece Metallic Raceway Covers

Seam Clip Fitting, DS4000 Series, Steel, Gray, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, Ortronics Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Accepts GFCI receptacle and only Ortronics datacom inserts. Supplied with both adapters to accommodate two TracJack devices or one Series II device. For AL5200 Series Raceway. Finish - Anodized Aluminum

Category: Large 2-Piece Metallic Raceway Cover Plates

Entrance End Fitting, DS4000 Series, Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Wmd Alds4010a Alds4000 Entran

Category: Large 2-Piece Metallic Raceway End Fittings

Wm Alds4047d Alds4000 Single

Category: Large 2-Piece Metallic Raceway Cover Plates

5' Plugmold Plus Multioutlet Strip comprised of five 12 inches apart, GBA Finish - Ivory

Category: Single Circuit Tamper Proof Plugmold

One-piece latching raceway with co-extruded hinge and adhesive bakcing. Available in 8' [2.44m] lengths.

Category: 1-Piece Non-Metallic Raceway

For mounting Ortronics Series II modules into 5507 opening. Includes two outlet identification labels with clear covers and two matching screw covers. Gray

Category: 2-Piece Non-Metallic Raceway End Fittings

WMD G20GB606TR

Category: Single Circuit Tamper Proof Plugmold

WMD 24S7212IGX99IV PLGMD 20A

Category: Single Circuit Steel Plugmold

Makes transition from 5500 Series Raceway to the 5400 Series Raceway. White

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Non-Metallic, 2A, Single Unloaded AMP Netconnect Module. Size: 0.57" x 0.76". White.

Category: Keystone Modules For Metallic Raceway

For AC8850 Box. Includes one (1) Wiremold CM Series Open System adapter. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

Connects a vertical run of AL5200 Series Raceway with a horizontal overhead run with its cover facing up.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Bridge Fitting, Multiple Channels, 400 Series, Steel, Ivory

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

For mounting up to four power and communication devices at one location. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: Small 2-Piece Metallic Raceway Connectors & Adapters