Boxes & Enclosures

Adjustable Sliderbar Box Kit, Includes: (1) SL24 SliderBar 15 - 24 Inch Adjustable Length, (1) SLB101 1-Gang Non-Metallic Box With Installation Screws and Slider Clip

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Mounting Bracket. Device Leveler & Retainer, Device Mount, Metallic. Prevent Devices From Being Pushed Back Into Wall.

Category: Metallic Box Supports

2 In. Deep, with Lugs - White Three Threaded Outlets - 4-1/2 In. x 2-3/4In.

Category: 1-Gang Metallic Weatherproof Boxes

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Switch Box, 1 Gang, Gangable, 3 x 2 Inch, Plaster Ears, Old Work, Welded, Metallic, Depth: 3-1/2 Inch, Bottom Knockouts: (1) 1/2 Inch, Side Knockouts: (2) 1/2 Inch, End Knockouts: (2) 1/2 Inch, Cubic Inches: 18

Category: Metallic Switch / Outlet Boxes

Steel City® RS-17-CC Surface Cover, 4 in L x 4 in W x 1/2 in D, Steel

Category: 4" Square Metallic Box Covers

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

6IN BRASS CVR KIT W/LR

Category: Round Recessed Box Covers

BHN A170151-1419 ELECTRIC GREY BOX

Category: Rectangular Non-Metallic Underground Pull Boxes

2-Gang, Nail-On, Switch/Outlet Box, Non-Metallic, Depth: 3-5/8". Cubic Inches: 37.5". Includes: Clamps

Category: Non-Metallic New Work Switch / Outlet Boxes

Oil-Tight Hole Seal, For 1 Inch Conduit Holes, Painted Steel

Category: Painted Steel Enclosure Hole Seals

Enclosure, Screw Cover, NEMA 3R, No Knockouts, 12 x 12 x 8 Inch, Steel with Gray Finish

Category: NEMA 3R Screw Cover Enclosures

Flat Rigid Box Support, Steel, Pregalvanized, 3 Boxes, Box Depth: 1 1/2", 2 1/8", 2 1/2", 2 7/8", 3", 3 1/4", 3 1/2", Box Size: 4", 4 11/16", 5", Stud Spacing: 8"–16"

Category: Metallic Box Supports

One Gang Square Device Cover, 5 Cubic Inches, 4 Inch Square x 3/4 Inch Raised, Pre-Galvanized Steel

Category: 4" Square Metallic Box Mud Rings

4-11/16 Inch Square Cover, 2-Device, Mud Ring, 5/8 Inch Raised, Drawn, Metallic, Cubic Inches: 7.5

Category: 4-11/16" Square Metallic Box Mud Rings

Electric Heater, 100 watt, Size/Dims: 115v 50/60Hz, Material/Finish: Aluminum.

Category: Enclosure Heaters

In-Use Cover, 1-Gang, Weatherproof, Vertical and Horizontal Mount, Non-Metallic, Depth: 3-1/4". Includes Separate Insert Types: Duplex, Decorator/GFCI Receptacle, Toggle Switch and Single Receptacle Diameters: 1.125", 1.375", 1.56", 1.625", 1.687" & 2.125", Clear. Includes: Lockable Tab.

Category: 1-Gang Weatherproof In-Use Box Covers

4 Inch Square Cover, 1-Device, Mud Ring, 1/2 Inch Raised, Drawn, Metallic, For use with Tile

Category: 4" Square Metallic Box Mud Rings

Wall Mount, Type 3R, Enclosure, Screw Cover / KO's, Size/Dims: 24" x 24" x 8", Material/Finish: Galvanized Steel/Gray

Category: NEMA 3R Screw Cover Enclosures

Floor Box Assembly, Die-cast Aluminum, Brushed Aluminum Finish, Includes Duplex Receptacle, 15 Amp, 125 Volt, NEMA 5-15R, Gasket, Floor Leveling PVC Ring, Aluminum Floor Plate, For Use With Concrete Floors.

Category: Assembled Recessed Round Boxes

4" Square Cover, 2-Device, Mud Ring, 2" Raised, Welded, Metallic, for 1900.

Category: 4" Square Metallic Box Mud Rings

4" Octagon Box, Drawn, Metallic. Depth: 1-1/2". Side Knockouts: (4) 3/4". Bottom Knockouts: (2) 1/2" & (2) 3/4". Cubic Inches: 15.5". Maximum Static Load: 50 lbs.

Category: Octagon Metallic Boxes

Masonry Box, 1-Gang, 3-1/2 Inch Deep, Gangable, Side Knockouts: (4) 1/2 Inch and 3/4 Inch Eccentric, End Knockouts: (2) 1/2 Inch and 3/4 Inch Eccentric, Bottom Knockouts: (2) 1/2 Inch and 3/4 Inch Eccentric, Welded, Cubic Inches: 22, Steel

Category: Gangable Masonry Boxes