Search results

4 SQ BOX CVR 1/4 RSD 2 3/4 EARS

Category: 4" Square Metallic Box Extension Rings

4 Inch Square Box, Welded, Metallic, Depth: 2-1/8 Inch, Side Knockouts: (8) 1/2 Inch, (4) 1/2 Inch, and 3/4 Inch Eccentric, Bottom Knockouts: (2) 1/2 Inch, (2) 1/2 Inch and 3/4 Inch Eccentric, Cubic Inches: 30.3

Category: 4" Square Metallic Fire Alarm Boxes

JIC PANEL, FOR ENCLOSURE, 16X14

Category: Enclosure Back Panels

Triple Gang, Wood and Steel Stud Bracket Box with Quick/Click. 3/8 offset for wood and steel stud mounting. Six Auto/Clamps on each end. For use with 3/8 to 5/8 wallboard.

Category: Non-Metallic Switch / Outlet Boxes With Brackets

4 Inch Round Ceiling Box, Depth: 2-3/16 Inch, Nail-On, J-Bracket, Cubic Inches: 20.25, (2) Captive Mounting Nails, (4) Auto/Clamps, Non-Metallic

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

Enclosure, JIC Series, Screw Cover, NEMA 12, 10 x 8 x 6 Inch, Steel/Gray

Category: NEMA 12 Screw Cover Junction Boxes

Enclosure, JIC, NEMA 4X, Hinge Cover with Clamps, 24 x 24 x 12 Inch, Stainless Steel

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Commercial Products Masonry Box, Steel, 22 cu-in, 1 Gang, 6 Knockouts

Category: Gangable Masonry Boxes

Single gang, wood and steel stud bracket box with 3/8 offset for wood and steel stud mounting. It has two Quick/Click Entries for each end, for use with 3/8 and 5/8 wallboard. It is available in single, two, three, four gang and 4 inch square boxes. It is olded of high-impact thermoplastic and can be used for steel, aluminum, or wooden studs. 100 pack.

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Weatherproof Round Cover, 4 Inch Diameter, (1) 1/2 Inch Threaded Outlets, Zinc Die Cast, Gray, Gasket and Stainless Steel Mounting Screws Included.

Category: Round Metallic Weatherproof Box Covers

CIR 12128 RTSCGV NK GALV N3R

Category: NEMA 3R Screw Cover Enclosures

Continuous Hinge, Type 4X, 10.00x8.00x6.00, Fiberglass

Category: Fiberglass Hinged Cover Enclosures

Grounding Kit For Inline Enclosures, Includes: (2) Installed Copper Wires, Installation Hardware, and Installation Instructions

Category: Enclosure Grounding Kits

Junction Box, NEMA 4, Continuous Hinge with Clamps, 36 x 30 x 10 Inch, Steel/Gray Powder Coat ***Discontinued, See Sub***

Category: NEMA 4 Wall Mount Enclosures

FSC Device Box, 1-Gang, Hub Size: 1/2 Inch, Box Depth: 2 Inch, Includes: Internal Ground Screw, Material: Aluminum, For Use with Threaded Rigid Metal Conduit.

Category: 1-Gang Aluminum FS & FD Device Boxes

Box Support, Type: Screw-On, 1/2 - 3/4 Inch Conduit to Metal Stud, Steel

Category: Enclosure Mounting Bracket Kits

Eaton Crouse-Hinds series Square Extension Ring, 4", Drawn, 2-1/8", Steel, (8) 1", 30.3 cubic inch capacity

Category: 4" Square Metallic Box Extension Rings

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAN Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3 Inch Opening and (2) 3/4 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof N Conduit Outlet Boxes

Junction Box, Screw Cover, NEMA 3R, 18 x 12 x 10 Inch, Knockouts, Steel/Galvanized

Category: NEMA 3R Screw Cover Enclosures

37.0 Cu. In. two gang electrical box for use with nonmeatllic sheathed cable - Machine tapped device holes, slot provision for low voltage divider, offset gauge marks, leveling ribs, rigid hard box construction, no distortion with high temperatures, shatter resistant with low temperatures - New work residential construction 2 HR fire resistive walls - Fiberglass reinforced polyester - thermoset box - Size:D=3 7/16", W=4", H=3 3/4" - Mount with Angled mid nails - Speed KlampsÖ bulk packed *** Discontinued ***

Category: Non-Metallic New Work Switch / Outlet Boxes

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Junction Box, NEMA 3, Screw Cover, 8 x 8 x 6 Inch, Steel/Galvanized

Category: NEMA 1 Wall Mount Enclosures

FLEXSTATION CONTROL STATION COMPONENTS

Category: Explosion-Proof EDS Mounting Bodies