Search results

Siding Plate, Converts Octagon Box to Accommodate Large Fixtures, Plastic

Category: Weatherproof Box Mounting Kits

Box support to secure electrical box to finished dry wall, galvanized steel.

Category: Metallic Box Supports

JUNC BOX 3 3/4 PIPE PLUGS

Category: Conduit Junction Boxes - Type GU

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Junction Box, NEMA 4X, Hinge Cover, 7 x 10 x 6-1/2 Inch, Steel

Category: PVC / Polyester Screw Cover Junction Boxes

Single Gang Electrical Box For Use With Nonmetallic Sheathed Cable, New Work, Angled Nails, 2-5/8 in Depth, 2-5/16 in Width, 3-3/4 in Height, Black

Category: Non-Metallic New Work Switch / Outlet Boxes

Mulberry; Electrical Box Cover; 2 GFCI Receptacle; Material: Steel; Finish: Powder Coated; Size: 4 IN X 1/2 IN Raised; Old Number: 192GFI

Category: 4" Square Metallic Box Covers

JIC Flat Enclosure Panel, 6 x 6 Inch, Steel With White Finish

Category: Enclosure Back Panels

Allied Moulded 4304-NKV 4 Gang Electrical Box, Nail On, For Use With Non-Metallic Sheathed Cable, Height: 3-3/4", Width: 7-1/2", Depth: 3-9/16"

Category: PVC / Polyester Screw Cover Junction Boxes

1 OUTLET BOX 3 IN DIAMETER COVER FOR THREADED RIGID/IMC

Category: Explosion-Proof C Conduit Outlet Boxes

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAT Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 5 Inch Opening and (3) 2 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof T Conduit Outlet Boxes

Weatherproof Outlet Box, 1 Gang, (3) 1 Inch Threaded Outlets, 2.625 Inch Deep, Aluminum, Gray, Detachable Lugs, (2) Close-Up Plugs, and Self Tapping Ground Screw Included.

Category: 1-Gang Metallic Weatherproof Boxes

Eaton's Crouse-Hinds series Condulet GUA Conduit Outlet Box with Cover

Category: Explosion-Proof LB Conduit Outlet Boxes

Eaton Crouse-Hinds series S Series duplex receptacle cover, Sheet steel, Surface mount, Two-gang, For duplex convenience receptacles, standard and two-wire, three-pole grounding

Category: 4" Square Metallic Box Covers

4 SQUARE BOX COVER 1 DEVICE 1/2 RAISED

Category: 4" Square Metallic Box Mud Rings

Condulet Cast Device Box For Threaded Rigid and IMC Conduit 2 Gang Deep 3/4

Category: 2-Gang Malleable Iron FS & FD Device Boxes

4" Diameter, Old Work Ceiling/Fixture Box with Speed Clamps, Surface Mount, Non-Metallic, Depth: 1-5/8", Cubic Inches: 16.0, Fixture Weight: 50lbs, Fan Rating, 35lbs. Includeds: Mounting Hardware.

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

Single Gang, Old Work Switch and Outlet Box with Swing Bracket for mounting. Adjusts from 1 1/4 down to 1/8. Two Auto/Clamps on Each End. 100 pack.

Category: 1-Gang Metallic Weatherproof Boxes

Weatherproof Round Box, (4) 3/4 Inch Threaded Outlets, 1-1/2 Inch Deep, Aluminum Die Cast, Gray, (4) Close-Up Plugs and Ground Screw Included.

Category: Round Metallic Weatherproof Boxes

FourGang, Wood and Steel Stud Bracket Box with Quick/Click. 3/8-inch offset for wood and steel stud mounting. Rear stabilizing bar virtually eliminates inward movement. Six Auto/Clamps at each end. For use with 3/8-inch to 5/8-inch wallboard. 25-Pack.

Category: Non-Metallic New Work Switch / Outlet Boxes

Concrete Box Plate, Flat, Blank, Steel, For Use With 4 Inch Octagon Boxes

Category: Concrete Ring Covers

Double Gang, Screw Mount Steel Stud Box with Captive Combo Head Self-Tapping Mount Screws on Each End. Four Auto/Clamps on Each End. 50 pack.

Category: Non-Metallic New Work Switch / Outlet Boxes

Single Gang, Deep Bracket Box for Wood and Steel Studs with Quick/Click Entries. 3/8 offset for wood and steel stud mounting. For use with 3/8 to 5/8 wallboard. 100 pack.

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Weatherproof Cover, 1 Gang, Blank Type, Vertical Mount, Brushed Aluminum

Category: 1-Gang Metallic Weatherproof Box Covers