Search results

Switch/Outlet Box, 1 Gang, Old Work, Depth 3 Inch, 18 Cubic Inches, PVC

Category: Non-Metallic Old Work Switch / Outlet Boxes

All Ampolemnt10 encl Pole Mount Kit

Category: Enclosure Pole Mount Kits

ALL AM864H 8X6X4 ENCLOSURE HI

Category: Fiberglass Screw Cover Junction Boxes

4" Octagonal Steel Fan/Fixture Support Box For Use With Nonmetallic Sheathed Cable

Category: Metallic Ceiling Support Boxes

3.5" Dia. Round Fixture Support Box For Use With Nonmetallic Sheathed Cable

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

Enclosure, NEMA 4X, Hinged, 6 Inch x 6 Inch x 4 Inch, Wall Mount, Gray, Fiberglass

Category: Fiberglass Hinged Cover Enclosures

Wall Mount Enclosure, AM Series, NEMA 4X,10 x 8 x 6 Inch, Hinge Cover With Snap Latch, Fiberglass *MODIFIED*

Category: Fiberglass Wall Mount Enclosures

4 Inch Round Fixture Support, Depth 2-5/16 Inch, Bar Hanger 16 - 24 Inch, Cubic Inches 23, Non-Metallic

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

30x24x10 NEMA 4x Fbrgls Encl Raised Twist Latch Hinged Cvr

Category: Fiberglass Hinged Cover Enclosures

All P186 carbon Steel Back Pnl For Am1868

Category: Enclosure Back Panels

ALL AMHSPL LARGE PL HOLE PLG

Category: Non-Metallic Enclosure Hole Seals

4" Round, Fixture Support Box, 7" Square Mounting Flange, Non-Metallic, Depth: 1-1/4", Cubic Inches: 12"

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

4 Inch Round Fixture Support Box, Depth 2-5/16 Inch, Nail-On, Cubic Inches 23, Non-Metallic

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

ALL 3300-Z4K 46 CI 3G DEVICE

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Type:NEMA 4X Type: Nonmetallic Enclosure Special Features: Hinged snap latch type, overlapping and opaque cover design with FIP formed-in-place polyurethane gasket system Application:Industrial control panels intended for general industrial use, operating from a voltage of 600 volts or less Material:ULTRAGUARD - Fiberglass reinforced polyester - thermoset Size:A=10.14", B=8.26", C=4.13", usable depth=3.68" Color:RAL 7035 - Gray Mounting:Stainless steel feet fastened to back side brass inserts

Category: Fiberglass Hinged Cover Enclosures

Switch/Outlet Box, 1-Gang, Old Work, Thermoset Fiberglass, Depth: 1-11/16". Cubic Inches: 16.0". Includes: Ears, Wing Brackets

Category: Non-Metallic Old Work Switch / Outlet Boxes

ALL PA4032 ALUM BACK PNL FOR

Category: Enclosure Back Panels

Wall Mount Enclosure, Screw Cover, NEMA 4X, 12 x 12 x 4 Inch, Fiberglass Reinforced Polyester

Category: Fiberglass Screw Cover Junction Boxes

4-3/4" Blank Round, Box Cover, Non-Metallic, Color: Ivory

Category: Non-Metallic Ceiling / Fixture Box Covers

ALLIED AMHMI108L 10X8 HMI CVR

Category: Enclosure Surface Covers & Doors

6.7 Cu. In. 4 square inch electrical junction box two gang plaster ring - Quick change/assemble cover screw holes and slots, molded-in splined device holes - Cover for Allied Moulded 4 square inch junction boxes (PJ-20 and PJ-32) with provision for two gang profile and use with 1/2" drywall - PVC - Thermoplastic - Size: D=5/8", W=4", H=4" - Mount with 2 screws

Category: Non-Metallic Plaster Rings

ALLIED 9350-HNK FBRGLS 4 IN R

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

Switch/Outlet Box, 1-Gang, Depth: 2-5/8 Inch, Cubic Inches: 18, Nail-On, Non-Metallic

Category: Non-Metallic New Work Switch / Outlet Boxes

15.0 Cu. In. 4" dia. round fixture support box for use with nonmetallic sheathed cable - Machine tapped fixture holes, rigid hard box construction, no distortion with high temperatures, shatter resistant with low temperatures - New work residential construction 2 HR fire resistive walls and ceilings (50 lbs. fixture support) - Fiberglass reinforced polyester - thermoset box - Size: Depth=1 11/16", Dia=4" - Mount with Bottom mount - Speed Klamps™ factory installed

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes