Search results

TS Lock Insert

Category: Enclosure Handle Kits

Data Pocket, Mounts to Door Frame, Assembly Screws included, Size/Dim: 800 mm, Depth: 90 mm, Color: Light Gray.

Category: Enclosure Pole Mount Kits

Rain Hood, Stainless Steel, IP 56 / NEMA 4X, 19 Inch x 14 Inch x 4 Inch, Use with 3243/44

Category: Enclosure Cooling Fan Shroud Kits

TopTherm roof-mounted cooling units "Blue e", Total cooling output 0.50 - 4.00 kW, total cooling output L35L35 at 50Hz: 3412, material: Sheet steel, color: RAL 7035, supply includes: Nano-coated condenser, Integral electric condensate evaporation, Fully wired ready for connection (plug-in terminal strip), Drilling template, Assembly parts, description: Energy-efficient Blue e roof-mounted cooling units in output categories from 500 W to 4,000 W, with integral e-Comfort controller, RiNano coating on the condenser and electrical condensate evaporation as standard.

Category: Enclosure Compact Cooling Fans

Wall Mount Enclosure, Hinge Cover with Quarter Turn Latch, NEMA 4X, 19.700 x 15.700 x 8.270 Inch, Stainless Steel Body and Door With Carbon Steel/Zinc Plated Mounting Plate

Category: Stainless Steel Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4X, 36(H) x 30(W) x 12(D) Inch, 304 Stainless Steel, Includes Zinc Plated Mounting Plate

Category: Stainless Steel Wall Mount Enclosures

Wall Mount Enclosure, NEMA 4X, Hinge Cover, 35.400 x 35.400 x 11.800 Inch, Stainless Steel With Brushed Finish

Category: Stainless Steel Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover with Quarter Turn Latch, NEMA 4X, 48 x 36 x 16 Inch, Stainless Steel Body and Door With Carbon Steel/Zinc Plated Mounting Plate

Category: Stainless Steel Wall Mount Enclosures

Plastic Handle, Version B Without Lock Cylinder Insert

Category: Enclosure Mounting Bracket Kits

TopTherm fan-and-filter units, color: RAL 7035, supply includes: Complete unit ready to install, including filter mat, description: Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m¦/h, standard protection category IP 54.

Category: Enclosure Cooling Fan & Exhaust Packages

Wall-Mount Enclosure, Hinged Cover, NEMA 4, IP66, Dimensions: W: 35.43", H: 35.43", D: 11.81"

Category: NEMA 4 Wall Mount Enclosures

TopTherm Filter Fan Unit, 115 Volt, 204 x 204 x24mm, Complete Unit Ready For Connection Including Filter Mat

Category: Enclosure Cooling Fan & Exhaust Packages

Mounting plate for JB, material: Sheet steel, 2.0 mm, surface: Zinc-plated, description: Mounting plates for component installation inside of the enclosure.

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Filter Mat, Thickness: 10 mm, Temerature Resistant: -40°C to 80°C, Material: Open Celled Polyurethane, Package of 3 Each

Category: Enclosure Cooling Fan & Exhaust Packages

Wall Mount Enclosure, Single Door/Hinge Cover With Quarter Turn Latch, NEMA 4, 30 x 30 x 12 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Enclosure Heater Without Fan, 30 Watt, 240 Volt, 50/60 Hz

Category: Enclosure Heaters

0100H0400D TS PLINTH SIDE TRIM RAL7022T

Category: Enclosure Mounting Bracket Kits

Base/plinth trim panels, side, 100 mm, for base/plinth components front and rear, material: Sheet steel, surface: Spray-finished, color: RAL 7022, supply includes: 2 base/plinth trim panels, Assembly parts, description: For mounting between the base/plinth components. At 200 mm height, two 100 mm base/plinth trims may be used. Base/plinth trims may be installed rotated through 90 deg in order to stabilise bayed base/plinth components. Packaging Unit: 2 pc(s).

Category: Enclosure Mounting Bracket Kits

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Single Door/Hinge Cover With Quarter Turn Latch, NEMA 4, 16 x 20 x 8 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

LED Connection Cable, Infeed 3-Pole, 100 - 240 Volt, 3000mm, Orange

Category: Enclosure Lighting Connector Cables

Mounting plate for JB, material: Sheet steel, 2.0 mm, surface: Zinc-plated, description: Mounting plates for component installation inside of the enclosure.

Category: Enclosure Front Plates

Wall-Mount Enclosure for Disconnect, Hinged Cover, NEMA 4, IP66, Dimensions: W: 32.48", H: 35.43", D: 11.81"

Category: NEMA 4 Wall Mount Enclosures

Oiltight hole seals for conduit hole, Sheet steel, material: Sheet steel, surface: Powder-coated, color: RAL 7035, supply includes: Oil resistant gasket, description: Used to seal unused or empty pushbutton holes, conduit openings, knockout openings.

Category: Stainless Steel Enclosure Hole Seals