Search results

6IN CORE-UNWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Gray

Category: Assembled Poke-Through Units

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Anodized Aluminum

Category: Square / Rectangle Recessed Box Covers

Cutout Flanged Cover Assembly. Die-Cast Aluminum, Brushed Aluminum. For use with: Tile, Carpet.

Category: Square / Rectangle Recessed Box Covers

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Flush Style Floor Box Cover Assembly with Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Brass

Category: Square / Rectangle Recessed Box Covers

Die cast aluminum cover assembly designed to be used on top of floor covering. Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10).

Category: Square / Rectangle Recessed Box Covers

InteGreat A/V table boxes are an elegant solution for extending power, communication and A/V to the meeting presenter's point-of-use. InteGreat A/V table boxes provide the depth to mount devices, especially A/V devices, below the table top. It has attractive finishes that can match any room decor. Combine it with other InteGreat products for a comprehensive solution to managing and delivering power, communication and A/V connectivity for conference rooms. Available in both cord-ended and field-w

Category: Recessed Compartment Boxes

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Aluminum

Category: Square / Rectangle Recessed Box Covers

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

Aluminum surface style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished bronze (BZ)

Category: Square / Rectangle Recessed Box Covers

6IN CORE-PREWIRED6IN CORE-PREWIRED

Category: Assembled Poke-Through Units

8in Core-unwired-surface GrayWlk 8atcgy 8in Core-unwired-s

Category: Poke-Through Cover Assemblies

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

8IN CORE-UNWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartments: No Device Plates are provided. For Bottom Feed Compartments: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Nickel

Category: Poke-Through Cover Assemblies

For use in concrete floors. For use with round Evolution Series cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately.

Category: Square Recessed Floor Boxes

6" Round Cover,Flush, Recessed Evolution 6AT Series,Black6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

WMD WAPBRKT WIRELESS ACCESS P

Category: Enclosure Mounting Bracket Kits

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Aluminum Powder-Coat.

Category: Poke-Through Cover Assemblies

880W2 Floor Box with 827B Brass Flange included. Flange can be used for tile or carpet applications. Order cover separately.

Category: Square Recessed Floor Boxes

P-THRU ASY FLUSH 4INComplete With One-piece Finish Flange And Conduit Assembly. Conduit Assembly Consists Of One 3/4 Inch And One 1 1/4 Inch Trade Size Conduit. Finish Cover Flange Provided With One 3/4 Inch And One 1 1/4 Inch Trade Size Screw Plug Opening. Colors Available In Painted Gray

Category: Assembled Poke-Through Units

Floor Box Cover Assembly, Type: Flush, Material/Finish: Aluminum/BlackFloor Box Cover Assembly, Type: Flush, Material/Finish: Aluminum/Black, For Use With 8STC & 8STCP Poke-Thru Assemblies.

Category: Poke-Through Cover Assemblies

Aluminum flush style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished black (BK)

Category: Square / Rectangle Recessed Box Covers