Search results

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

WMD 862CK-1/2 FLOOR BOX W/896

Category: Assembled Recessed Round Boxes

Surface Style Cover with Floor Insert, Flange, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

W-mold S166b Fl Brass Tele/ data

Category: Square / Rectangle Recessed Box Flanges

8IN COVER ASSEMBLYWAL 8CTGY 8IN COVER ASSEMBLY

Category: Round Recessed Box Covers

Poke-Thru Device, Recessed, Assembled Unit, Metallic CoverPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist/Slide, Device Type: (2) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts Extron® Electronics AAP and MAAP Series Devices, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

For carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

Blank Flanged Cover Assembly. Die-Cast Aluminum. Black. For use with: Tile, Carpet.

Category: Square / Rectangle Recessed Box Covers

1" trade size barriered conduit. Also includes BX/MC cable connector. Must be activated with 200 Series or 241 Series Service Head and FIFP or FP Series Faceplates (sold separately) to maintain UL Listing and/or Classification. NOTE: This Poke-Thru requires a minimum 2 1/32" (52mm), 2 1/8" (54mm) maximum diameter hole.

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6 Inch, Depth: 16-1/4 Inch, Aluminum

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Diameter: 6", Evolution Series, Flush, MetallicPoke-Thru Cover Assembly, Tamper Resistant

Category: Poke-Through Cover Assemblies

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

8" Poke-Thru Device, Recessed, Evolution Series, Brass8" Poke-Thru Device, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist Open. Recessed: 3-1/4", No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units

6" Poke-Thru Assembly, Prewired for A/V, Duplex ReceptPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Twist, Material/Finish: Die-Cast Aluminum/Gray, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". Cover Type: Slide, Device Type: (1) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts the Extron® Electronics AAP and MAAP Series Devices, For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

Floor Box Cover, Single- or Dual-ServiceFloor Box Cover, Single- or Dual-Service, For Furniture Feed Applications. Includes (2) 1/2" and (1) 3/4" Conduit Connectors.

Category: Round Recessed Box Covers

Aluminum, Surface Style Cover with Solid Lid, Evolution Series. Size: 16-3/8" Length, 12-1/2" Width. For use with: Evolution Series 6, 8, and 10-gang Floor Boxes. Bronze

Category: Square / Rectangle Recessed Box Covers

Wlk 862gfi Floor Box W/895gfi

Category: Assembled Recessed Round Boxes

8IN CORE-UNWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze.á Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartments: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly (tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, and One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Black

Category: Assembled Poke-Through Units

Surface Style Cover Assembly with Floor Insert, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

Round Wood Floor Box Kit, Brass Finish, USB Type A Charging Will Supply 3.1A to Power all Mobile Devices, Can be Installed on Carpet, Wood, Natural Stone and Tile Floors That Have a Wooden Subfloor

Category: Assembled Recessed Round Boxes

6IN FURNITURE FEED COVER ASEM-NICKL

Category: Poke-Through Cover Assemblies

Includes 862 Series Floor Box, one 15A, 125V tamper-resistant brown duplex receptacle, and one 895 brass duplex receptacle cover for carpet. Order 862KIT when using in concrete floor.

Category: Assembled Recessed Round Boxes

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BK) painted black.

Category: Assembled Poke-Through Units

6IN CORE-UNWIRED-SURFACEWAL 6ATCNK 6IN CORE-UNWIRED-SURFACE

Category: Assembled Poke-Through Units