Search results

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Surface, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Recessed Prewired Assembly with Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 6" (152mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly. (BZ) bronze.

Category: Assembled Poke-Through Units

6" Round Cover, Flush, Recessed Evolution 6AT Series,Gray6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Aluminum

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Floor Insert, Flange, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Nickel

Category: Square / Rectangle Recessed Box Covers

Flush Style Cover with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

6IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

Flush Style Cover Assembly with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Aluminum

Category: Square / Rectangle Recessed Box Covers

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat.

Category: Poke-Through Cover Assemblies

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Gray

Category: Square / Rectangle Recessed Box Covers

8in Cover Assembly Flush-brass8in Cover Assembly Flush-brass

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIREDFor carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: One (1) proprietary 20A Duplex Power Receptacle installed, One (1) 682A Device Plate, One (1) 68MAAP Device Plate. For Center Compartment: One (1) 6DEC Mounting Plate, One (1) 6AAP Mounting Plate, One (1) 6MAAP Device Plate. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

Category: Assembled Poke-Through Units

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Diameter: 6", Evolution Series, Flush, MetallicPoke-Thru Cover Assembly, Tamper Resistant

Category: Poke-Through Cover Assemblies

Poke-Thru Device, Recessed, Assembled Unit, Metallic CoverPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist/Slide, Device Type: (2) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts Extron® Electronics AAP and MAAP Series Devices, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

For carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Nickel

Category: Assembled Poke-Through Units

Cover Assembly, Round, Diameter: 8", BrassCover Assembly, Round, Diameter: 8 Inch, Brass, Cover Type: Surface, Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, For Tile, Carpet, Wood and Laminate Flooring.

Category: Poke-Through Cover Assemblies

6IN CORE-UNWIRED-FLUSHFor tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Includes one (1) 6TS Tile Shim. Brass

Category: Assembled Poke-Through Units

1" trade size barriered conduit. Also includes BX/MC cable connector. Must be activated with 200 Series or 241 Series Service Head and FIFP or FP Series Faceplates (sold separately) to maintain UL Listing and/or Classification. NOTE: This Poke-Thru requires a minimum 2 1/32" (52mm), 2 1/8" (54mm) maximum diameter hole.

Category: Assembled Poke-Through Units

Blank Flanged Cover Assembly. Die-Cast Aluminum. Black. For use with: Tile, Carpet.

Category: Square / Rectangle Recessed Box Covers

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers