Search results

WMD RC7ATCBS-LJB FLUSH POKE-T

Category: Assembled Poke-Through Units

Floor Box Cover Kit, 6-1/2" Round, Ratchet-Pro 881 Series, Single or Dual Service, Style: Flush, Cover Type: Slide, Device Type: (1) Duplex Receptacle (20 Amp), Accepts (2) Communications Modules (not included), Includes: (2) 1/2" and (1) 3/4" Conduit Connectors. Material/Finish: Polycarbonate/Aluminum, Use with Tile, Carpet, Wood and Laminate Flooring.

Category: Round Recessed Box Covers

WMD 861AMDTCGY WOOD/RAISED AM

Category: Assembled Recessed Round Boxes

WMD EFB6M 6-GANG MODULE ASSEM

Category: Recessed Floor Box Service Fittings

Ratchet-Pro 881 Series Multiple Service Floor Box Cover Kit, For 881 PVC Floor Box, Kit Complete With Prewired 20 Amp Duplex Receptacle (Receptacle Can Be Wired As Standard Receptacle or Isolated Ground), Flange And Slide Holder, 881ADP Adapter, and 881DIV Divider, Provided with Wiremold CM Series Open System Unloaded Adapters, Ortronics Series II and TracJack Adapters, Modular Jacks Sold Separately, CAUTION: Not For Use On Concrete Pours Less Than 4 1/2'' (114mm) Deep, Not For Use When Concrete Is The Finished Floor, Use Only For Tile, Carpet, Or Wood Covered Floors

Category: Round Recessed Box Covers

Provides separation of services.

Category: Recessed Floor Box Service Dividers

Cover Assembly, Surface Style, Solid, Material/Finish: Die Cast Aluminum/Brass, Insert Areas Allow for Tile or Carpet Cutouts to Match Finished Floor.

Category: Round Recessed Box Covers

UFD FLUSH FTG QUAD 15A RECEPT GRAY

Category: Assembled Poke-Through Units

6A opening with communication adapter on one side. Accommodates Wiremold Open System communication modules. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Includes dual-gang box, two 106 adapter with eight openings for communication devices, and brass cover with four screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 3 1/4" W x 3 3/4" L x 3 7/8" D [83mm W x 95mm L x 98mm D] Device Plate: 4 7/8" W x 5 1/16" L [124mm W x 129mm L].

Category: Assembled Recessed Gang Boxes

WMD AV7000BK 1PBLACK1/4IN STE

Category: Poke-Through Mounting Plates

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Flush, Material/Finish: Die-Cast Aluminum/Black Powder-Coat.

Category: Poke-Through Cover Assemblies

WMD RP7CTCBS ACTIVATION COVER

Category: Round Recessed Box Covers

4-1/4" Round Cover, Metallic, Cover Type: Brass or Aluminum cover plate (1/2" Opening). Device Type: Communications or Power Cover Plate. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Nonmetallic ring for use with bare concrete and terrazzo floor applications. NOTE: Only for use on RFB6E and RFB6E-OG Floor Boxes.

Category: Round Recessed Box Flanges

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Nickel

Category: Square / Rectangle Recessed Box Covers

Used to upgrade existing installations of RC3 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), ivory (VY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier must be replaced with new. See installation instructions with retrofit kit for complete installation details. NOTE: Existing installations of RC3 Poke-Thru Devices are not required to be upgraded to meet carpet scrub water requirements, if manufactured prior to June 2003. Brass

Category: Assembled Poke-Through Units

Complete with one 3/4" [19.1mm] conduit and two 1/2" trade size adapters and closure plugs. Colors available in painted gray (GY), black (BK), forged brushed aluminum (AL), and plated brass (BS). Use with the RC7STC Insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" [78mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimu

Category: Poke-Through Cover Assemblies

Wmd 428bl Blank Plate Blk

Category: Square / Rectangle Recessed Box Covers

2" IPS to 3/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Nonmetallic ring for use with bare concrete and terrazzo floor applications.

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept up six (6) Ortronics TracJack devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings