Search results

Flush Style Floor Box Cover Assembly with Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

6" Round, Furniture Feed Cover Assembly, Evolution 6AT Series, Style: Surface, Metallic, Cover Type: Screw Plug - (1) 3/4", (1) 2 to 1-1/4". Material/Finish: Aluminum/Gray Powder-Coat, For Tile, Carpet and Wood Flooring. Includes: (1) 3/4" Conduit Connector, (1) 1-1/4" Conduit Connector and (1) Service Divider. Caution: Not for Use on Concrete Pours Less Than 4 1/2"; Not For Use When Concrete is the Finished Floor.

Category: Poke-Through Cover Assemblies

Surface Style Cover with Floor Insert, Flange, Material/Finish Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units

880w2 Floor Box With 828tcal Brushed Aluminum Flange Included. Flange Can Be Used For Tile Or Carpet Applications. Order Cover Separately.

Category: Square Recessed Floor Boxes

Single GFI opening faceplate. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Floor Box Service Fittings

Flanged Cut-Out Cover Assembly With Insert, Die Cast Aluminum, Color: Brass, Origin: USA

Category: Square / Rectangle Recessed Box Covers

Attaching ring for Source I (preset or afterset) zinc die-cast. 4" (102mm) O.D. 1 1/8" ring depth. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Wmd Psrc9fftcbk Flush Furnitu re Feed

Category: Round Recessed Box Covers

Round Floor Cover, Diameter: 5-1/2 Inch, Single Service 3/4 Inch Opening, Device Type: Communication. Color: Brown. For use in Carpet Applications.

Category: Round Recessed Box Covers

Blanking Top Plate. Diameter: 3-1/2 Inch, For use with: 1-1/4 Inch IPS, Brass

Category: Round Recessed Box Covers

All communication device accepts up to four UTP connectors. Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Floor Box, Raised 2-1/2", Size: 9-1/8" x 11", Accomodates (2) Duplex Receptacles and (6) Communication Devices,

Category: Assembled Recessed Gang Boxes

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Anodized Aluminum

Category: Round Recessed Box Covers

Wood/raised Quad Floor Box-all Bras

Category: Assembled Recessed Round Boxes

2-Gang, Floor Box Assembly, Color: Brass. Includes (2) 15A/125V Tamper Resistant Duplex Receptacles and (4) Screw Plugs

Category: Assembled Recessed Gang Boxes

MudCap, For Use With RFB9/11 Series Floor Boxes, Metallic

Category: Recessed Floor Box Service Fittings

Includes single-gang box, one 15A, 125V tamper-resistant receptacle, and nickel cover with two screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 2 1/8" W x 3 3/4" L x 3 7/8" D (54mm W x 95mm L x 98mm D) Device Plate: 3 1/8" W x 4 15/16" L

Category: Assembled Recessed Gang Boxes

Complete plug assembly for abandoning an open 3" (76mm) diameter hole. Assembly includes intumescent fire-stop material to maintain the fire classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black die-cast aluminum cover.

Category: Round Recessed Box Covers

In-Wall Storage Box, Large, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 19", H: 19" , D: 5", Black

Category: Recessed Home Entertainment Boxes

In-Wall Storage Box with Flange, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 9", H: 14.25" , D: 3.9", Black

Category: Recessed Home Entertainment Boxes

In-Wall Storage Box with Flange and Cover, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 9", H: 14.25" , D: 3.9", Black

Category: Recessed Home Entertainment Boxes

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. TR indicates tamper-resistant version secured with tamper-resistant screw. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers