Search results

Mounting rails 23 x 23 mm, for TS, SE, material: Sheet steel, surface: Zinc-plated, description: For mounting on the horizontal and vertical enclosure sections of a TS via additional assembly components. Packaging Unit: 6 pc(s).

Category: Enclosure Mounting Bracket Kits

Slot-in cable gland, 482.6 mm (19Zoll), Size of mounting hole 9.5 x 9.5 mm, material: Sheet steel, surface: Zinc-plated, supply includes: 50 expanding nuts, Plastic washers, description: Consists of an expanding nut which is inserted into the square attachment hole at the front and then secured with the assembly screw. Packaging Unit: 50 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

0760H0600W0350D AE RAL7035

Category: NEMA 4 Wall Mount Enclosures

Terminal boxes KL, without gland plate, material: Enclosure: Sheet steel, Cover: Sheet steel, all-round foamed-in PU seal, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with cover, Quick-release fastener including plastic bushes, description: Spray-finished enclosure with sheet steel cover, without gland plate Protection category IP 66.

Category: NEMA 4X Wall Mount Disconnect Enclosures

Eaton Crouse-Hinds series DS duplex receptacle cover, Sheet steel, Flush mount, Single-gang, For duplex convenience receptacles

Category: Steel FS & FD Device Box Covers

0100H0400D TS PLINTH SIDE TRIM RAL7022T

Category: Enclosure Mounting Bracket Kits

Compact Enclosure, Hinge Cover With (2) 3mm Double Bit Cam Locks, 31 x 24 x 9.8 Inch, NEMA 4, Carbon Steel/Gray Finish, Includes Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

CRO S1003 THREE GNG SHT STEEL

Category: Steel FS & FD Device Box Covers

Component shelf 2 U, static installation, 482.6 mm (19Zoll) for 482.6 mm system punchings, 482.6 mm, material: Sheet steel, surface: Spray-finished, color: RAL 7035, description: Component shelf 2 U, static installation for attachment to the 482.6 mm system punchings. Load capacity: 25 kg.

Category: Enclosure Shelves

Wall-mounted enclosures EL, 3-part, pre-configured with mounting angles, depth-variable, Pre-configured, material: Wall and hinged part: Sheet steel, 1.5 mm, Viewing window: Single-pane safety glass, 3 mm, surface: Powder-coated, color: Wall and hinged part: RAL 7035, Glazed door: RAL 7035/7015 (slate grey), supply includes: Wall section, Hinged part with 25 mm pitch pattern of holes in the front and rear frame, Designer glazed door, description: Wall-mounted enclosure 3-part, pre-configured with: Solid gland plate, top, with brush strip at the bottom, mounting rails, C rails, outlet filter, earth rail, wall-mounting bracket

Category: NEMA 4 Wall Mount Enclosures

1600H0500D TS SIDEWALLS PAIR

Category: Side Mount Enclosure Panels

Mounting rails 23 x 23 mm, for TS, SE, material: Sheet steel, surface: Zinc-plated, description: For mounting on the horizontal and vertical enclosure sections of a TS via additional assembly components. Packaging Unit: 12 pc(s).

Category: Enclosure Mounting Bracket Kits

RTT 1057500 700(27.5) X 500(19.7) X 250(9.8)

Category: NEMA 12 Hinge Cover Junction Boxes

Wall Mount Air Conditioner, TopTherm Blue e Series, 2080 BTU, 230 Volt, Carbon Steel Housing

Category: Enclosure Air Conditioners

EMC shielding bracket, material: Sheet steel, surface: Zinc-plated, description: Toolless quick assembly: Press the EMC shielding bracket against the cable shield and clip into the rail, diameter changes are compensated in full by the spring. Packaging Unit: 10 pc(s).

Category: Enclosure Mounting Bracket Kits

TopTherm roof-mounted cooling units "Blue e", Total cooling output 0.50 - 4.00 kW, total cooling output L35L35 at 50Hz: 5118, material: Sheet steel, color: RAL 7035, supply includes: Nano-coated condenser, Integral electric condensate evaporation, Fully wired ready for connection (plug-in terminal strip), Drilling template, Assembly parts, description: Energy-efficient Blue e roof-mounted cooling units in output categories from 500 W to 4,000 W, with integral e-Comfort controller, RiNano coating on the condenser and electrical condensate evaporation as standard.

Category: Enclosure Air Conditioners