Distribution & Terminal Blocks

Multi-Tap Connector, Single-Sided, Clear Insulation, 3 Ports, 2/0 - #14 STR.

Category: Single Sided Entry Wire Connector Blocks

Aluminum Multiple Tap Connector w/ Mount Holes, Clear Insulated, 4 Port, 2 Sided Entry, 4 AWG-600 kcmil, Al/Cu Rated

Category: Dual Sided Entry Wire Connector Blocks

UV Rated Plastisol Covered Al Distribution Connectors, 1-Sided Entry, 6 Ports, #10 AWG- 350 Kcmil, 600 V, 5/16" Hex

Category: Single Sided Entry Wire Connector Blocks

5 Wire Polaris 1/0-14 AWG Insulated Multi-Cable Connector with Mounting Holes, One Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on one side only. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLM Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

Eaton Bussmann KU series panel mount terminal block connector, 600V, 60A, Double row, standard, Twelve-pole, #10-32 TPI Screw, Panel, Black, Nickel-plated brass terminal

Category: Terminal Strips

BUR 1PL46 BLKTAP,SGL,6 PRTS, 14-4

Category: Single Sided Entry Wire Connector Blocks

Power Distribution Blocks, Open, 175a, Three-pole, 2/0-#8awg Line, (6)#4-#14awgload

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 3-Pole, 2 x 2 - 600 MCM In, 2 x 2 - 600 MCM Out, Open, 840 Amp, 1000 Volt AC/DC

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 3-Pole, (2) 2 - 600 Run/Tap

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 12, Wire Range: 6 AWG - 3/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Single Row Terminal Blocks, 20A, industrial, Black, #6-32 TPI screw, printed circuit, 0.187 in quick Connect, Barrier end, Four-pole, -40 to 105 deg C, Break down voltage 1600V, Standard barrier, 250V, #22 to 14 AWG (Copper), Molded thermop

Category: Terminal Strips

Power Distribution Block, Protective Cover, Double Wide, Clear, 1-Pole

Category: Non-Insulated Connector Block Covers

UV Black Covered Distribution Connector, Plastisol Covered, 8 Ports, #14-2/0 AWG , 5.55 Inch Length, 1.56 Inch Width

Category: Dual Sided Entry Wire Connector Blocks

Multi-Port Single Sided Entry, 5, 500 kcmil-12 AWG Str

Category: Connector Blocks - Submersible - One Sided Wire Entry

Sealed Pure Lead Battery, 6.0 Volts DC, 8.0 Ah, Supplies 4.2 Amps @ 6 Volts for 90 Minutes, Alternate Part Number: 12-707

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

IDEAL, Terminal Strip, Wire Size: 22 - 6 AWG, Spacing: 0.625 IN, Amperage Rating: 60 AMP, Voltage Rating: 600 V, Material: Nickle-Plated Brass, Number Of Circuits: 4, Torque Rating: 20 IN-LB, Terminal Screw Size: 4

Category: Terminal Strips

Multi-Tap Connector, Insulated, Clear, Aluminum, Double-Sided, Mounted, 4 Conductor

Category: Dual Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 6, Wire Range: 250 MCM To 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Terminal Block Tools & Accessories Distribution/Splicer Blocks and Covers

Category: Non-Insulated Connector Block Covers

175Amp, 600V, Barrier Terminal Blocks Power Distribution Block (LWH) 104.8mm*73.7mm*85.8mm

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Insulated Multi-Tap Connector, 3-Port, Same Side, 350 MCM - 10 STR, Aluminum/PVC Insulated

Category: Single Sided Entry Wire Connector Blocks

Power Distribution Block, 2-Pole, Line: 6 AWG - 350 kcmil Cu/Al; Load: (1) 14-1/0 Cu/Al, (14) 14-10 Cu, 10 Al

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

BUS C2791 BLK (B008-2792/1)

Category: Terminal Junction Blocks

Terminal Box Straps for Junction Boxes, fits 8.00, White, Steel

Category: Terminal Strips