Distribution & Terminal Blocks

PDB 1P AL INTERMEDIATE UL1953

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Multi-Tap Connector, 2-Port, Insulated, Clear, 10 AWG - 250 MCM, 2-Sided, For Aluminum or Copper Conductors

Category: Dual Sided Entry Wire Connector Blocks

Multi-Tap Connector, Direct Burial Submersible, Six Conductor, Insulated, 6 Ports, 500 kcmil-12 AWG Str, 600 V

Category: Connector Blocks - Submersible - One Sided Wire Entry

4 Wire Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Blocks Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Category: Single Sided Entry Wire Connector Blocks

TERMINAL BLOCK

Category: Terminal Strips

BUR BDBMHC222/02 2/0-14-2P-2/0-14 SEC

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

C-H CH16325-3 POWER DISTRIBUT

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 20 AWG - 12 AWG (Sold In Multiples of 300)

Category: ln-Line Splicers/Reducers - Insulated

Power Distribution Block, 2-Pole, Line: 6 AWG - 500 kcmil Cu/Al; Load: (6) 14-2 Cu, 12-2 Al

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 10, Wire Range: 250 MCM - 750 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

10 Wire Polaris 3/0 - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

BARRIER BLOCK

Category: Terminal Strips

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 6, Wire Range: 6 AWG - 3/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Multi-Tap Connector, Insulated, Clear, Aluminum, Double-Sided, Mounted, 4 Conductor

Category: Dual Sided Entry Wire Connector Blocks

PDB 3P AL INTERMEDIATE UL1953

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 3-Pole, (2) Primary/Secondary, 14 - 2/0 AWG, 350 Amps per Pole

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Power Distribution Block, Versipole Series, 175 Amp, 3 Pole, 600 Volt, Aluminum/Tin

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

UV Black Covered Distribution Connectors, #10-350, 2.47 in L, 2..32 in W

Category: Single Sided Entry Wire Connector Blocks

Aluminum Unitap, In-Line Splice Reducer, #14-#2 Class B & C, #14-#2 Class G,H,I,K, DLO, 2 PORT

Category: ln-Line Splicers/Reducers - Insulated

Power Distribution Block, 3-Pole, (2) 6 - 350 Run/Tap

Category: Multiple Primary / Multiple Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 2-Pole, Line: 14-2/0 Cu, 8-2/0 Al; Load: (6) 14-4 Cu, 8-4 Al, 600V AC/DC

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Aluminum Multiple Tap Connector, Clear Insulated, 6 Port, 1 Sided Entry, 4 AWG-600 kcmil, Al/Cu Rated

Category: Single Sided Entry Wire Connector Blocks

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code«. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories: miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper. 1 wires in 4 wires out 1 poles 175 amps AL Mini size.

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

BUR BIBD35012 350-10 2-SD-12

Category: Dual Sided Entry Wire Connector Blocks