Corded Tools

DEW D25553K 1-9/16 RTRY HAMER

Category: Corded Spline Drive Rotary Hammers

MIL48901009 BLADE KIT MULTI T

Category: Corded Multi-Cutter Saws

2 HP 4 GAL HAND CARRY TWIN TANKS, 14 AMPS

Category: Corded Compressors

Current: 6.3a, No Load Speed: 0 To 4000rpm, Clutch: Standard, Torque: 81in-lbs,maximum Fastener Size: #8, Tool Weight: 3.1lb

Category: Corded Drills

DEW WP849 VARI SPEED POLISHER

Category: Corded Grinders

Dws535 7-1/4" Worm Drive Circular Saw,

Category: Corded Circular Saws

Dewalt; Drill Kit; Right Angle; Amperage Rating: 7 Amp; Speed: 400 , 600 , 900 Rpm; Chuck Size: 1/2 In; Tool Weight: 9.75 Lb; Max Power: 580 Uwo; Shipping Weight: 17.5 Lb; Includes: Chuck Key With Holder, 5-position Side Handle, Allen Wrench, Kit Box; Capacity In Wood (spade Bit): 1-1/2 In; Capacity In Wood (self-feed): 2-9/16 In; Capacity In Wood (hole Saw): 4 In; Capacity In Wood (auger Bit): 1-1/2 In; Capacity In Steel (twist Bit): 1/2 In; Capacity In Steel (hole Saw): 5 In; Gear Reduction: Triple

Category: Corded Right Angle Drills

Milwaukee; Drill; Magnum; Voltage Rating: 120 Vac; Amperage Rating: 3.5 Amp; Speed: 0 - 1300 Rpm At No Load; Chuck Size: 3/8 In; Chuck Type: Heavy-duty Industrial Keyed; Cord Type: 8 Ft Fixed; Tool Weight: 3.900 Lb; Spindle Lock: No; Metalcapacity: 3/8 I

Category: Corded Right Angle Drills

MIL 48-90-0055 MULTI-TOOL BLA

Category: Corded Multi-Cutter Saws

Jack Hammer, Impact Energy: 61ft/lb, Current: 15a, Loaded Speed: 900bpm, Variable-speed Dial:settings, Tool Weight: 68.3lb

Category: Corded Demolition Hammers

MIL 48-90-0110 1-1/4FTBLADE

Category: Corded Multi-Cutter Saws

Compatible With All 10,000Psi (700Bar) Rated Hoses And Single-Acting Accessory Heads, Easiest Set-Up: 80% Smaller, 75Lbs Lighter Than Gas Units, Gas-Like Performance: 24Sec Cycle Times And Up To 60 Presses On A Single Charge On 1590 Acsr Connectors

Category: Corded Hydraulic Pumps

Electric Hydraulic Pump with Shure-Stake Control, Hand or Foot Switch and Non-metallic Hose(Sold Separately)Required for Operation

Category: Corded Hydraulic Pumps

Impact Energy: 61ft/lb, Current: 15a, Loaded Speed: 900bpm, Variable-speed Dial:settings, Tool Weight: 68.3lb, Includes: Hammer Truck; Flat Foot Plate For Hammer Truck; Pegged Foot Plate For Hammer Truck; (2) Bull Point Chisels; (1) 1in Cold Chisel; (1) 3in Wide Chisel

Category: Corded Demolition Hammers

GRE 15631 RAM UNIT-HYD 1731-

Category: Corded Hydraulic Hoses

Ridgid; Threading Machine; Z; Pipe Capacity: 1/4 - 4 In (6mm-100mm) 4 - 6 In (100mm-150mm) With 161 Geared Threader; Bolt Capacity: 1/4 - 2 In; Motor Control: Reverse/off/forward, Heavy-duty Rotary-type And Integral Foot Switch; Motor: 1-1/2 Hp, Single-phase, 60/50 Hz, Induction Type; Gear Box: Two-speed Gear Box 3:1 Ratio; Spindle Speed: 36/12 Rpm; Chuck: Hammer-type With Replaceable Rocker-action Jaw Inserts; Rear Centering Device: Cam Action; Cutter: Model 764 Full-floating, Self-centering 1/4 In - 4 In With F-229 Cutter Wheel; Pump: Self-priming, Gerotor-type, Automatic-reversing, Constant-flow; Reamer: Model 744, 1/4 - 4 In Blade-type; Voltage Rating: 120 V; Frequency: 60 Hz; Thread Size: 1/2-4; Thread Type: Npt; Weight: 509 Lb

Category: Corded Threading Machines

Adapter, Square Drive Adapter

Category: Corded Threader Accessories

Ridgid; Pipe Die; Z; Thread Per Inch: 8 Tpi; Thread Type: Npt; Thread Direction:rh; Material: High Speed Steel; Capacity: 2-1/2 - 4 In

Category: Corded Hand Held Threaders

BLM 8107WD .75HP 3600RPM 1PH

Category: Corded Grinders

Model 300 Power Drive Threader Motor & Pedal ***Motor & Foot Pedal Only***

Category: Corded Threading Machines

Threading Machine. Includes: 1.75 Gal Tray, 811A Universal Die Head, (2) Sets 1-2" Alloy Dies, Cutter, Reamer, Cutting Oil, (4) Hex Wrenches and Cuttering Wheel.

Category: Corded Threading Machines

BLM 8250W .75HP 3600RPM 1PH 6

Category: Corded Grinders

MXI 1680-20 MILWAUKEE SUPER HAWG

Category: Corded Right Angle Drills

115V CAPSTAN HOIST

Category: Capstan Hoists