Search results

Ladder Rack, Inside Bend, Width: 18", Material/Finish: Steel/Black

Category: Cable Tray - Runway Support Kits

45-Degree Elbows, 4.00x4.00, SS Type 304

Category: 45° Horizontal Cable Tray Bend

CBF RADT9012KIT2EZ

Category: Cable Tray Splicer Kits

Ladder Rack, Straight Section , Width: 12 Inches, Material/Finish: Steel/Gray

Category: Straight Cable Ladder Tray

Used to carry cables horizontally throughout the system. Use QuikLock Coupler FRBC24X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

Used to carry the cables horizontally throughout the system. Accepts cable retainers FRCR12BL-X or hinged cover FRHC12BL6. Use QuikLock Coupler FRBC12X4BL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

CBF CVN50BL

Category: Straight Cable Tray Covers

1/4" plastic bolts and hex nuts fastens channel and fittings together for added strength and rigidity.

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Ladder Rack, Butt Splice Kit, Material/Finish: Steel/Zinc

Category: Cable Tray Splicer Kits

Square splice washer used for splicing wire mesh tray on bends and adjustable turns 2 CE40s and one EZBN 1/4 are requred for each connection Black Powder Coated for indoor use

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Used to fully enclose 12x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Straight Cable Tray Covers

Attaches wire mesh tray up to 4 inches wide to walls cabinets or machinery Also can be used as an electrical box support Black Powder Coated for indoor use

Category: Cable Tray Mounting Hardware

Ladder Rack, Junction Splice Kit, Material/Finish: Steel/Zinc

Category: Cable Tray Splicer Kits

6 inch x 12 inch x 10 foot section of wiremesh cable tray constructed of precision engineered high quality welded steel wire and can be adapted to fit any installation on-site Our patented UL Classified painted wire tray is classified as an EGC Equipment Grounding Conductor

Category: Straight Wire Basket

CBF RADT90KIT6BL

Category: Cable Tray Splicer Kits

CBF DROPOUTKITGC

Category: Cable Tray Drop Outs

The fiber mounting 2-piece ladder rack bracket attaches to either a 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or a 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. The bracket halves slide into position and clamp together on the ladder rack rail, which allows

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

12 inch wide by 10 inch long wire mesh tray cover eliminates dirt and dust build up on cables field fabricates on site to fit changes in levels Provides physical protection for cables Use built in tabs for permanent attachmet to tray Black Powder Coated for indoor use

Category: Straight Cable Tray Covers

Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. Bracket halves slide into position and clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded ro

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Clean Tray Stainless Steel Cable Tray, Material: Stainless Steel, Dimensions: 2" x 2" x 120"

Category: Straight Channel Cable Tray

Clean Tray Stainless Steel Cable Tray, Straight Section, Dimensions: 4" x 4" x 120"

Category: Straight Channel Cable Tray

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 18" (457mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 18" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB18BL bra

Category: Cable Tray Trapeze Hangers

Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod

Category: Cable Tray Mounting Hardware

10 inch Universal splice bar Used to join 2 pieces of wire mesh tray together Can be cut with a bolt cutter Can be bent by hand for use in tees elbows etc Hot dipped galvanized exterior installations

Category: Cable Tray Splicer Kits